The HammerBlow Trailer Coupler, like the #BD028463 is a coupler that will mount to the from frame of a trailer and be used to attach to a hitch ball on the back of a vehicle. It mounts to 50 degree A-Frame Tongue and will couple to a 2-5/16 in hitch…
Though I may have an option for you, I was also unable to find any info on the T-23972 seal you currently have. With that being said, the Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2 #RG06-050, or #58846 as…
Hello Matthew. The grade 8 5/8" bolts are generally rated for upwards of 27,000 to 30,000 lbs. Most 5/8" hitch pins are rated for way more than this, so swapping your bolts for 5/8" pins will be just fine. Just make sure you are using…
The overall length of the shaft of the bolt part #MBT58500-LN58 is 4-13/16 inches, the length of the threaded portion is 1 inch and the length of the smooth part of the shaft is 3-13/16 inch.
The TCM 21334TC Seal best cross references to our Grease Seal part #GS-2125DL which has a 2.125" inner diameter and 3.376" outer diameter. This seal is designed for grease lubrication.
The lift from an over under kit like the part #K71-385-00 that you referenced gives you a lift of the diameter of the axle plus the thickness of the leaf spring pack. Since this is for a 3 inch axle it would be 3 inches plus the leaf spring…
Geoff, the wheel bearings for the Yakima Rack N Roll is not available for replacement, unfortunately. To replace the bearings you'd need to replace the entire wheel with the Replacement Wheels for Yakima Rack and Roll Trailer #8880157, which…
Uni servo and duo servo is basically the style of wheel cylinder. It basically puts pressure on either side of the cylinder. The styles are interchangeable so if you have one style over the other you can go with either style. As long as your drum…
Trailer hubs that a 8 inch wheel can also fit a 12 wheel so yes you could upgrade to the larger wheel size. So you could use a 5.30-12 tire and wheel like the part #AM30780. The pilot diameter would be large enough to fit over the hub pilot. Since…
The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Filters
