Search: 344270kitw   >  

Hey Paul, yes we do. You can use the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX to replace your current fan and will work with your original controller and garnish.

The MaxxFan Plus Roof Vent w/ 12V Fan #MA00-04500K can replace your 4951 KSC, but it will not have the option to use your wall mounted thermostat. Personally, I would just remove the wall thermostat and and place the thermostat remote holder in the…

Yes, they will. The Ventline Ventadome Trailer Roof Vent item #V2110SP-24 is compatible with the MaxxAir Standard RV and Trailer Roof Vent Cover item #MA00-933069. This cover will fit with the Ventline Ventadome item #V2110SP-24 and allow you to…

We have a roof vent install kit that will work great with the Ventline roof vent part #V2092SP-25 and a fiberglass roof with the part #344270KITW which comes with install hardware, sealant, and butyl tape.

What you'd want is a roof vent like the Ventline #V2092SP-28 with a taller ceiling garnish part #VA0445-37 which is 5-5/16 inches tall and can be trimmed down to a shorter length appropriate for your ceiling opening.

Good morning, Don. The 3/4" wide butyl tape is exactly what we recommend for installing a roof vent such as the MaxxFan #MA00-07000K. We actually sell a roof vent install kit part #344270KITW that comes with sealant, screws and a 30' roll of…

You can utilize a power wall remote switch #VC0533-03-A or #VC0533-02-A (black or white). A rocker switch #BL0108-00 will work and you will need 2 of them. The installation kit #344270KITW will come with screws, tape, and sealant. You will also need…

I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ as it's 1" wide to fully cover the flange of your vent. Make sure you overlap the ends to form a tight waterproof seal. You can see me doing this at 2:50 mark in the…

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

Based on the design of the pictures you sent in it looks like a Ventline. I spoke with a Ventline tech and due to the older model design of your unit and with it being exposed to the elements you would need to replace the whole unit. If you just want…

You will have to manually turn the fan of the Fan-Tastic Vent Roof Vent w/ 12V Fan #FV802250 off after closing the lid of the roof vent.

Yes, it looks like your existing Fan-Tastic Fan model 4000BT is a standard 14" wide x 14" long roof vent so the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat part #MA00-05100K would fit the opening for your old vent as long as the roof…