Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Since this tire is 175/80-13 bias tire, tires of this size have weight ratings up to 1,100 to 1,610-lb maximum load at 65 psi. This information is based on current tires we sell that are the same size like #AM31994. So the rating that I listed is…
view full answer...Thanks for the picture of your trailer frame. Based on seeing them the Lippert Shock Kit part #LC281255 does fit since it's a boxed frame and you already verified that the axle diameter matches.
view full answer...I do have a great option for you, however we do not have any standard 3,500 pound round tube axles available that match the dimensions you provided. For an exact replacement your best option will be to go through a local trailer shop or the…
view full answer...If you have a 5 on 4-1/2 inch bolt pattern on your hub with 8 inch wheels, you will be able to use the 10 inch wheels with a 5 on 4-1/2 inch bolt pattern on that hub. The center hole diameter on the 8 inch wheels and the 10 inch wheels are the same…
view full answer...The Ark Drop Down Corner RV Stabilizer Jacks - 33" #ARK77FR is the same as their part number: XODDS850BUS.
view full answer...Trailer axles are designed to have the bow in them that you described. This allows the axle to flatten out when it is loaded and have the proper camber. If you have axles that are rated for considerably more than what the trailer will ever have…
view full answer...Anytime the fully loaded and ready to tow trailer weight is greater than 50 percent of the weight of the tow vehicle, using weight distribution should be considered. When you get the pop-up, hitch it to the vehicle and pay special attention to the…
view full answer...It sounds like you are having trouble removing your weight distribution spring bars from their lift brackets on the trailer frame. When its time to unhitch the trailer and truck what you want to do is use your trailer tongue jack to lift the trailer…
view full answer...Yes, the Footplate for 2,000-lb and 5,000-lb Round, A-Frame Jacks part #JF-99 measures 4-1/2" long x 2-1/4" wide. I have attached a review video for you as well which lists these dimensions. I have also attached a list of our other…
view full answer...You would want to run a bead of the sealant around the vent opening on the underside of the mounting flange as shown in red on the photo I edited for you. Put the vent into place, pressing firmly so that the sealer spreads to the area around the…
view full answer...Yes you can upgrade the 5 inch monitor of your Furrion Vision S system with a 7 inch one with the part #FR47FR and you'd be set.
view full answer...The Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System Item #FR47FR will replace your current 4.3" Monitor and allow you to add additional cameras to your system if needed.
view full answer...Filter Your Search
Contact and Help