Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Tom, you are on the right track. I checked out your 2023 Jayco Jay Flight 284 BHS and it does have an underslung coupler so the correct B and W Continuum weight distribution would be the part #BW88FR. An underslung coupler is basically one that…
view full answer...The closest we have to match those measurements is going to be the H-Channel for Enclosed Trailer #36281-955 which has an internal width of 1.027" and a height of 2". We do also have a C-Channel #362213-955 which has an inside measurement…
view full answer...We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit for…
view full answer...The Trailer Idler Hub Assembly part #AKIHUB-545-35-G-K or part #AKIHUB-545-35-G-EZ-K for easy grease will be a direct replacement for the TDE 46210. That said, you may also need the Double Lip Seal part #168255TB since that hub can use two different…
view full answer...There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500…
view full answer...Both the ProPride 3P part #PR57QR and the B and W Continuum part #BW78FR allow backing up and work extremely well but since there isn't a ProPride system that would be ideal for the tongue weight of your Winnebago Minnie FLX2306 I would go with…
view full answer...Generally speaking, the hub face measurements will be around 15" longer than the spring center measurement. That said, this can vary based on multiple different factors such as tire size, offset, etc. The most common options we offer are the…
view full answer...The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.
view full answer...The RetraxONE XR Hard Tonneau Cover #RTX62GR canister is 12" x 12" so you'll lose a foot of your bed length.
view full answer...For replacement Dexter manual adjust brake assemblies to replace your 36-19 you would want the part #23-27 for the right hand side and part #23-26 for the left hand side. These are manual adjust 10 by 2-1/4 inch Dexter brake assemblies that would…
view full answer...Either one is fine to do. With the Fulton Hi-Mount Spare Tire Carrier part #FSTC1000301 you are not going to be adding a great deal of width to your trailer so the difference is minimum. Giving you my opinion since there is no rule I would Choose the…
view full answer...A 4.80 x 12 trailer tire fits on a 12 inch x 4 inch wheel, so I would guess that is the size of your wheel. The size of the wheel is important when choosing replacement tires. The highest capacity tire that we carry for a 12 inch x 4 inch wheel is…
view full answer...Filter Your Search
Contact and Help