Bulldog Trailer Jack BD005122 Review

Products Featured in this Video

Bulldog Replacement Pipe Mount for Swivel Jacks - 2-7/8" Female - Weld On - 7/8" Pull Pin

5 reviews

Code: BD005122

Retail: $44.44

Price:  $36.05

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Pipe Mounts

• 2-7/8 Inch Pipe Mount
• Bulldog

Weld this female pipe mount to your trailer's frame to provide the mounting point for the male pipe on your swivel jack. Fits 3-1/4" male pipes with a 7/8" pin hole.

Do you have a question about part BD005122?more information >     

Review of Bulldog Accessories and Parts BD005122

Speaker 1: Today we're taking a look at the Bulldog Weld On Jack Pipe Mount. This tube welds on to your trailer and provides the attachment point for your pipe mount swivel jack. This is a female pipe that pairs with the male mount on your trailer jack. This piece allows your trailer to swing up along the trailer frame for travel and back down for when you're ready to use it.It's made from a durable steel construction. It features a raw finish, so it's ready to be welded. The holes for the pin have diameter of seven-eighths of an inch.

This is designed to fit a three and one quarter inch male pipe mount. So if we take an inner diameter measurement, should be just over that three and one quarter inch mark, and it is, it measures three and one-eighth of an inch. So it won't have any problem . Excuse me, it measures three and three-eighths of an inch, so it won't have any problem accepting that three and one quarter inch outer diameter male pipe.Measuring edge to edge going this direction, that's going to measure about two and thirteen-sixteenths of an inch to two and seven-eighths of an inch. The overall diameter here, outer diameter is right on four inches.

And this is made from five-sixteenth inch thick steel. You'll get one pipe mount with this part number. The other measurements that I want to mention for you, I took a measurement from the center of this hole to the edge of the mount and got a measurement of one and five-eighths of an inch. From the edge of the mount on this side to the center of the hole measures about an inch and a quarter.That's going to do it for today's look at the Bulldog Weld On Jack Pipe Mount.