Add a touch of class to your trailer and create a finished look by covering the wheel hub with this rustproof, stainless steel center cap. Fits 12" to 15" wheels with 3.19" center bore. Removable top works great with EZ lube axles.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to look at the Americana stainless steel trailer wheel center cap with the plug. This is designed to fit wheels that have a 3.19 inch pilot hole diameter. This cap will create a nice finished look on your trailer by covering the wheel hub with the stainless steel center cap. Stainless steel construction is very durable and rust proof. The center plug, right here, which is a black plastic, it is designed to pop into the opening there on cap here. The reason they do that is it makes it easy. You can remove it and pop it off because if you happen to have easy lube axles on your trailer you want to be able to access that grease zerk fitting on the end of the spindle.
Some trailers will have the easy lube axle. What that does is they allow you to pump grease into the bearings without having to remove the whole hub from the axle. If you have those you want to be able to access that zerk fitting. With the center cap on your wheels it allows you, once it's installed, inaudible 00:00:55 be installed like that. Once you need to get to your easy lube axles just put a screwdriver under there, pop that center cap out without having to take the wheels and tires off you'll be able to access that and grease the bearings on your trailer. This center wheel cap, when you go to install this basically, before you put your wheel and tire up onto your trailer, turn it around and through the back of the wheel you'll just push the center cap through the center hole, the pilot hole, and you'll see this little lip right here.
I'll catch the wheel and hold it into place. When you put your wheel and tire up onto your axle and put your lug nuts on this center cap will cover that ugly axle hub and spindle that protrudes through your trailer wheel. It gives you a nice finishing touch for a better looking trailer. This will work on 12 inch, 13 inch, 14 inch, and 15 inch diameter wheels. Remember they do have to have the pilot hole diameter of 3.19 inches. I do want to give you the length or heights on this overall.
The very top is going to be right about 3 3/4 inches. What I'm going to do is I happen to pull a wheel here. I'm going to show you how we do install that. Let me go ahead and zoom out just so you can see the wheel and the cap. This wheel happens to be ...
Here's the pilot hole. It's the large hole right here in the center of the wheel. The diameter on this one is 3.19 inches, so this cap is made to fit in there. Again, once your tire's mounted on here you're going to put this up onto your trailer. Before you put it onto the trailer what you want to do is take your center cap, again you've got you your lip right there, just push that center cap right through that large pilot hole until it hits that lip. It'll hold it right into place. When you life your wheel and tire up to put onto your trailer that cap will be just like that. Put your lugs on and tighten it down. Again, it gives you a nice finished look. To remove it just take your wheel and tire off the trailer, and then just pull the cap right out through the back. Simple as that. That should do it for the review on the Americana stainless steel trailer wheel center cap with the plug to fit 3.19 inch pilot hole diameter wheels.
Fast Service and High Quality Parts!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.