Result: trailer wheel covers

Hey Tom, you are on the right track. I checked out your 2023 Jayco Jay Flight 284 BHS and it does have an underslung coupler so the correct B and W Continuum weight distribution would be the part #BW88FR. An underslung coupler is basically one that…

You can attach the cable to #DL10965 by using two #DL24350 to fasten each cable to the provided holes on the large gear.

The Trailer Idler Hub Assembly part #AKIHUB-545-35-G-K or part #AKIHUB-545-35-G-EZ-K for easy grease will be a direct replacement for the TDE 46210. That said, you may also need the Double Lip Seal part #168255TB since that hub can use two different…

There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500…

We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit for…

Both the ProPride 3P part #PR57QR and the B and W Continuum part #BW78FR allow backing up and work extremely well but since there isn't a ProPride system that would be ideal for the tongue weight of your Winnebago Minnie FLX2306 I would go with…

Many times the issue with a dim light on one side or the other is caused by a poor ground connection. You will want to inspect all of the ground locations as well as the ground wires coming from each light. Check for loose connections or pinched or…

Generally speaking, the hub face measurements will be around 15" longer than the spring center measurement. That said, this can vary based on multiple different factors such as tire size, offset, etc. The most common options we offer are the…

The closest we have to match those measurements is going to be the H-Channel for Enclosed Trailer #36281-955 which has an internal width of 1.027" and a height of 2". We do also have a C-Channel #362213-955 which has an inside measurement…

The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.

A 4.80 x 12 trailer tire fits on a 12 inch x 4 inch wheel, so I would guess that is the size of your wheel. The size of the wheel is important when choosing replacement tires. The highest capacity tire that we carry for a 12 inch x 4 inch wheel is…

Yes, you are correct the best hitch lock to prevent rust and corrosion is the stainless steel lock. The stainless steel locks will not corrode. The Trailer Hitch Receiver Lock - Stainless Steel Flush Design, #e98882, is one of our top sellers. The…