Search: 650898   >   !Trailer Hitch   >  

In order to hook up a Blackstone Tailgater to the quick disconnect port on the side of a trailer you should be able to use the MB Sturgis RV Quick-Connect Propane Grill Hose part #100304-60-MBS or part #100304-120-MBS. I called Blackstone and they…

The LED lights on your 2018 Jeep Wrangler JL use the same wiring harnesses available for incanescent lights. I've linked our selection for you. I like to recommend the diode kit, part #RM-15267, because it installs a 6-way at the front of…

To flat tow a 2011 to 2013 Jeep Grand Cherokee there are 5 major components needed: base plates, tow bar, safety cables, lighting, and supplemental braking. The base plates are what attach to the front of the Jeep and provide a safe and proper…

For your Roadmaster Sterling Tow Bar #RM-576 the replacement stinger part #910019-40 is the correct replacement. The nut is included so if you need a horizontal bolt too you'd also need the part #RM350191-00.

If you use a circuit tester like part #PTW2993 you should be able to locate some wires behind or around your brake pedal and test them. If one gets hot only when your brake pedal is pressed, then you can connect the RoadMaster Transmitter #RM-9420 to…

The replacement shank you need for your Roadmaster Sterling is the part #9100019-40 that you referenced.

Yes we have confirmed with Roadmaster that the shank #910019-40 does fit the Roadmaster Sterling models that had a 6k capacity so this would work.

I spoke to my contact at Roadmaster and he informed me that there is no way to adapt your older style Roadmaster tow bar to the new stinger. If yours is still good and you were just looking to replace the stinger as preventative maintenance I would…

The best replacement option we offer for a Micro-Flex 349 Trailer Clearance Light is the Trailer Clearance or Side Marker Light part #MC32AB which is not the exact same shape but very similar and almost the same size. It also uses the same mounting…

The SMI Stay-IN-Play DUO Supplemental Braking System part #SM99251 comes with a monitor light that will get installed in the windshield of the tow vehicle and will then illuminate when the brakes in the towed vehicle are applied. If you want…

Yes, the Replacement Roadmaster Sterling Towbar Shank Assembly #910019-40 is a fit for all of the Roadmaster Sterling models. The current one they have active is the 8K #RM-576 but this same shank/stinger was used on the following discontinued models…

I reached out to Roadmaster and it appears you are going to have to replace your Roadmaster Sterling All Terrain, Non-Binding Tow Bar #RM-576. They no longer have a replacement shank for your 6000lb Sterling as they no longer produce parts for it.