Search: hollywood bike rack   >   !Hitch Adapters   >  

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

With your 2023 Kia Telluride SX Prestige X-Line having LED tail lights you will need the Curt Powered Tail Light Converter #C59236. The Harness #C93FV you found is only for use on models with incandescent tail lights. The Harness #C59236 will…

Yes, it will. It looks like the rear rack on your Aventon Pace 500 step through e-bike stops right around the 11 o'clock position. The pivoting arms on the Saris SuperClamp HD Bike Rack item #SAR44VR will go low enough on your wheel for…

To add a hitch to your 2023 Kia Telluride, I recommend the Curt Trailer Hitch item #C13420. This hitch is custom fit and bolts to your Kia with included hardware. We recently installed one of these hitches and the best part about it is that the…

The Deka 16/4 Wiring #DW03240-1 you were checking out is actually annealed bunched copper wire strands.

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and…

I understand why you want to add additional lights on your camping trailer. I recommend part #STL78RB. This is an oval 6-1/2 inch LED light with the stop, turn, and tail light function. LED lights require much less power than incandescent lights.…

In order to determine the correct mounting location of tail lights on a trailer it would be best to check with the department of transportation to make sure you are abiding by all local laws. That said, I wouldn't think it would matter if…

Of the two options the Light Guard part #LG440NP is the way to go. It gives solid all around protection and does extend past the light offering protection for the lens. Check out the attached photo showing how the light fits into the housing and…

The only 18 gauge wiring we have available is the Deka Bonded 3 Wire #DW02923-1, which is sold by the foot. This 3-wire bonded parallel wire has 16/30 stranding with a maximum voltage of 60V. If you are able to go a bit thicker we do also have the…

We do have options available for 4 wire for your trailer, but we do only have it as sold by the foot. With that said, for standard 4 wire, you will want the Deka #16-4B-1. This is the bonded 16 gauge wire used on just about anything and you will…

Both the Peterson Piranha LED Clearance and Side Marker Trailer Light w/ Turn Signal #M353A and Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal #OPT78FR are sold individually. We do not offer them as a pair for lower price. Since…