Trailer Wiring and Lights For Rewiring 5' X 8' Trailer With Reverse Lights And Side Marker Lights

Updated 02/22/2022 | Published 02/20/2022

Products Featured in This Question

Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal - Submersible - Amber Lens

(97)

$22.88

Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter

(262)

$17.49

25 Ft 5-Way Trailer Wiring Harness - Wishbone Style - 30" Ground - 5' Auxiliary Wire

(70)

$30.49

Peterson Piranha LED Clearance and Side Marker Trailer Light w/ Turn Signal - 6 Diodes - Amber Lens

(234)

$21.19

Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Red and Clear Lens

(504)

$57.83

Jeep-Style LED Combination Trailer Tail Light - 4 Function - 52 Diodes - Passenger Side

(59)

$59.75

Question:

Good morning, I am contacting you in reference to the number of lights that you receive when you order. I am looking at Peterson Piranha LED- Item # M353A and Miro-Flex LED and Item # OPT78FR. I did was unable to see if it for one or two and I do not want to assume either. If it for only the purchase of one light, is there a discounted price for 2 or more? Those were the lights I found on you website and what I am attempting to do is rewire my trailer. It is a 5X8 trailer that only came with brake lights. I am adding new wiring, rear lights, an additional set on the tailgate with reverse and a 5 foot LED light strip with brake, running , turn and reverse. If you have other options that you have that may fit the usage needs I would greatly appreciate it. Thank you for your time in advance and I look forward to speaking with you

asked by: AL

Expert Reply:

Both the Peterson Piranha LED Clearance and Side Marker Trailer Light w/ Turn Signal # M353A and Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal # OPT78FR are sold individually. We do not offer them as a pair for lower price.

Since you mentioned replacing your wiring the 25 Ft 5-Way Trailer Wiring Harness # A25W5B is a great starting point. You will need to add additional 20 gauge wire to run the reverse line circuit back to the tail lights.

You will need the Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter # 20036 for your tow vehicle if you only have a 4-way flat connector. This will allow you to tap into your reverse light circuit to power the trailer reverse lights you will be adding.

We have tail lights like the Fusion LED Trailer Tail Light # OPT37FR and Jeep-Style LED Combination Trailer Tail Light # STL60RB that include the 4 functions you are needing(stop, tail, turn and reverse). The ones you choose will depend on your specific trailer.