Is Installation Hardware Included with Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28

Question

Question:

In the installation video for the rack em fitz all ladder rack what type of screw are used to secure the ladder rack to the trailer and where can I find them?

asked by: Joel

0

Expert Reply:

Hardware is included with the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28. I have included a picture of it for you.

expert reply by: Michael H

0

click to enlarge

Answer 1

I'd have to see the roof so that I could send it to our roof rack manufacturers to see what would be the best.

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…

view full answer...

Answer 5

Hey Ben, for enclosed trailers like your 2020 Car Mate enclosed trailer the best option for a roof rack would be the Rhino Rack Aero Bar roof rack for camper shells part #Y02-480B since you plan to put kayaks and a cargo carrier up there. We have…

view full answer...

Answer 6

Since your 2020 Jeep Wrangler Unlimited does't have a tow package, there are a few parts you'll need to install before you can use a brake controller, but I can recommend ones that will require little to no splicing, to make the install as…

view full answer...

Answer 7

Yes, we do have a roof rack that will work with the rounded roof on your Interstate cargo trailer. It is the Rack'Em Fitz-All Enclosed Trailer Ladder Rack item #RA-28. This roof rack has a 400 lbs capacity and mounts to the side of your trailer…

view full answer...

Answer 8

Hey Adina, from what I could find the Norcold N811F requires a cutout that is 60" high x 23-1/2" wide x 24" deep. I would double check your opening just to be sure but based on those dimensions I recommend the Norcold RV Refrigerator…

view full answer...

Answer 9

The Rackem Fitz-All Enclosed Trailer Ladder Rack #RA-28 does adjust horizontally to allow it to fit trailer roofs from 4-feet to 8-1/2-feet wide but its height is fixed based on the position of the roof rain gutters, which are required in order to…

view full answer...

Is Installation Hardware Included with Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching