Search: etrack   >  

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck…

Hey Spencer, we have confirmed in the past that the Andersen Ultimate hitches can be used with offset balls like the Gen-Y part #GY43XR.

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics…

Hey Shawn, The E-track you're wanting to install in the back of your truck is just going to need to be screwed into the studs of the walls or into the floor. You'll want some self tapping screws ( #SL99FR) or…

Hey David, yes the Pro Series jack part #PS1401460303 will work with the pipe mount part #e52JR as they are both 2 inch.

Not only can it be done it is actually much easier than you might think John. First for the battery you want to select a deep cycle battery like the #BRW34FR. This will need to be stored in a Box #DW03009 to protect it from the elements. You can…

Hey Dwayne that is a great question. Generally, we would want the tie down points to be in line with the front and rear of the tire. So the #EM58522 straps would hang straight down and connect to the #RR05 D-ring. You can also angle them forward if…

Hey Kristopher, great question. You have a 2022 Ram 1500 correct? If so, I definitely recommend going with the Air Lift LoadLifter 5000 Air Helper Springs #AL57375. I can confidently say that using these will take care of all of the sagging, and…

In order to use your reverse lights as utility lights you would have to have a separate 12 volt power wire running to the lights. You would need a switch and you would need diodes to prevent back feeding. You would need to run some wire from the 12…

Hello Charles, thanks for reaching out. We do offer lift kits that may work on your trailer. I will need to know more about your trailer axle in order to recommend the correct lift kit. First is your axle a square torsion axle, or a round leaf…

I didn't receive your photos, but the manner in which you attach the e-track to your trailer deck will completely depend on what the deck is constructed of and where exactly on the deck you'll be placing the…

The inner bearings should be #LM48548 (1.375 inch inner diameter), outer bearing should be #L44649 (1.06 inch inner diameter) and the grease seal should be #58846. I would recommend you pull your bearings out to verify that but that SHOULD be what…