etrailer Horizontal E Track Spec Review Video

Hey Gary, thanks for the information! The etrailer Horizontal E Track item #e85VR would be a great way to add additional anchor points. You can bolt these tracks directly to your trailer's deck using self-drilling metal screws like item #SL99FR.…

No long-term contract, Natalie - but a service plan is required to use the trackers. When you buy the 3000 with wifi assist #PM84FR, 5000 #PM64FR, or 5000 with wifi assist #PM74FR from etrailer, you’re purchasing the hardware/device only. To activate…

Hey Bob! The Big Truck Big RV Tongue Weight Scale for Trailers - 2,000 lbs #BTBRV49FR works with standard 1-7/8", 2", and 2-5/16" ball couplers. Simply lower the trailer coupler onto the scale and read the tongue weight directly from…

Hey Moses! With that GVWR you either have the 2026 Grand Design Imagine 2670MK or the 2800BH. The correct rating for a weight distribution hitch (WDH) depends on your tongue weight. It looks like the dry tongue weight for the 2670MK is 785 lbs and…

Hi Danny! Since the Brophy Angled Motorcycle Wheel Chock for E-Track #BR26MJ is meant to be about 14" off the ground for it to work the best, you will want to mount it on vertically oriented e-track. This also doesn't cant fore or aft or be…

I went to our warehouse to pull the Curt combo bar #E-9 to provide some measurements. And yes, the Curt combo bar #E-9 will have an internal dimension of 2-inches x 2-inches and outer dimension of the shank is 2-1/2 inches x 2-1/2 inches. The forged…

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

The CargoSmart Folding Workbench #3481744 will sit approximately 3-3/4 to 4" out from the CargoSmart X-track mount #3481770. The braces on the CargoSmart Folding Workbench are 2-1/2" tall and the bracket that mounts in the X track is sits…

Hello Martin, thanks for reaching out. The etrailer High-Low Adjustable Adapter for Tow Bars #e52ZV is made in China.

A keen observation indeed, Brett. The mounting hole spacing on the Square D-Ring Tie-Down Anchor #ABS69FR is 3" horizontally and 3-1/4" vertically. I edited a picture for you to help illustrate.

Yes that is correct, Eugene. Since the canister sits flush with the bed rails, you'd effectively have 9" under the canister.