All About the etrailer Horizontal E Track Video

Hey Jon, happy to help. Yes, I was able to find the replacement parts to #BM44YR. The 90 degree angle #BM99RR and the check valve #BM98GR have 1/2" MPT fitting that connect directly to your B&B RV Water Center. So no worries about…

Hey Gary, thanks for the information! The etrailer Horizontal E Track item #e85VR would be a great way to add additional anchor points. You can bolt these tracks directly to your trailer's deck using self-drilling metal screws like item #SL99FR.…

Hey Larry! We didn't have that washer so I went ahead and added it to our site. The 1/2" Cone Washer for RV PEX Water Line Fittings #LSB82XR is what you're looking for.

To secure your BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch #MD254 I recommend the XL Anti-Rattle Trailer Hitch Receiver Lock #SHP2040-XL. This not only stabilizes the ball mount in the hitch receiver, but it also provides a locking hitch…

Hey Shawn, The E-track you're wanting to install in the back of your truck is just going to need to be screwed into the studs of the walls or into the floor. You'll want some self tapping screws ( #SL99FR) or wood screws ( #SL49FR) that are…

Hey Matt, if you install the etrailer e-track part #e42VR to a metal backing plate or to the metal frame of your trailer and you put hardware in each bolt hole you would be fine with the weight of your Wrangler and the other one you mentioned. Then…

The Erickson E-Tracks like #E19148 can really be installed any way you like on your trailer, but most customers tend to install them so they sit directly under the tires of the vehicle they are securing. This will allow you to easily use Tie-Down…

The Erickson Ratchet Tie-Down Strap part #EM58629 could be installed along the top of the tire and secured directly in front and behind. This would provide great front/bracket support but not side to side. If you are instead looking for more of a…

To install the etrailer Horizontal E-Track #e42VR to the floor of your trailer you need the E-Track Backing Plates w Hardware #e76YR which can be used to install the tracks on flooring up to 2" thick. If your trailer floor is thicker than that…

If you have water continuously leaking from the drain tube of your Furrion RV Tankless Water Heater #FR93FR then it would either indicate that the water pressure is too high and the pressure relief valve is doing its job or that the pressure relief…

The etrailer E-Track Backing Plates with Hardware part #e76YR work with any of the etrailer Horizontal E-Tracks like part #e42VR. The track and backing plates allow for up to 2,000 lbs but you'll also be limited by the material you're…

There isn't a set rule, but I'd recommend bolting the e-track into place. The distance between fasteners will depend on the nature and structure of the floor of your trailer. If the metal floor has a sturdy wood backing, I'd attach the e…