Width Of The etrailer Trailer Hitch Receiver # e36YR

Question

Question:

Hi, could you tell me the dimension of the this hitch, I need to know how wide it is, like specifications. Part Number: e36YR Thank you

asked by: Dan O

0

Expert Reply:

Hi Dan,

The etrailer Trailer Hitch Receiver # e36YR is 42" overall and the crosstube measures 36" in length. It's designed to fit 2019 - 2025 Chevrolet Blazers (excluding Premier models). If you need anything else just let me know and I'd be happy to go back out to the warehouse and measure.

expert reply by: Kevin C

0

e36yr width
(click to enlarge)

Dan

12/2/2024

Thanks for getting back to me. We have a 1995 Winnebago brave, on a P30 chassis. We're looking to install a front hitch for bikes. Front chassis is 36 at the widest. Looking for cheap bolt up or weld on.

Kevin C.

12/2/2024

@Dan There isn't a custom fit front mounted hitch for your Winnebago unfortunately so you'll need to go with an adjustable-fit weld-on trailer hitch. We offer a variety of these with different drop sizes so you'll want to measure from your frame rails down where the receiver tube can stick out through the front fascia to determine the correct hitch. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR These will fit an 18" to 44" wide frame width and any excess can just be trimmed off of the crosstube.

Answer 1

Hey Robert, so at this time we do not have an install video for the Curt Hitch part #C63ZV on a 2024 Chevy Blazer EV yet but hopefully we do soon. If you check out the attached install instruction link though you can see that this does not require…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 12

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Width Of The etrailer Trailer Hitch Receiver # e36YR

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching