See what our Experts say about this MORryde Trailer Suspension Parts

• Recommended Cushioned Equalizer Replacement Options For Factory Equalizer 6" Wide and 4" Tall
  I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers # MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter Equalizer # MR87ZR and don't worry the additional width as the shackle straps will accommodate for the difference. If you chose either the shorter MORryde or Road Armor # LC696740 you may be able to switch to a shorter shackle strap. If you have the longer...
  view full answer...
• 2 inch Lift Kit for Jayco 5th Wheel with MORryde CRE3000 Cushioned Equalizers
  The Lippert tandem axle lift kit part # RR23QX does not work with your MORryde CRE3000 suspension kit # MR87ZR.
  view full answer...
• Best Equalizer Suspension Upgrade For Tandem 3,500 lb Axles
  Those are some good options, and the best overall upgrade (without getting too crazy like you said!) for your Jayco with tandem 3,500 lb axles is going to be the MORryde CRE3000 with the X-factor crossmember. The Road Armor is good, but the combination of the upgraded MORryde equalizers with the crossmember will give you more added benefit. The cushioned equalizers are going to provide you with a more comfortable ride due to their rubber construction and suspension travel, which is going...
  view full answer...
• What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
  Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 # MR87ZR and AllTrek 4000 # MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will offer. For the CRE3000 the height distance is 3-1/4" and it can have up to 3" of travel, while the AllTrek 4000 has a 4-1/2" height distance, and it can have up to 4" of travel. I personally like the CRE3000 a little better so I recommend going...
  view full answer...
• How to Pick Out MORryde Equalizer Kit If Wheelbase is 34 inches
  Hey Carl, this is a great question that we have checked with MORryde on in the past. They told me in your situation to have you measure from the center of the front hanger bolt to the rear hanger bolt to pick out the correct SRE4000. If that distance is 59 inches go with the # MR87ZR or if 61 inch # MR27ZR.
  view full answer...
• Why Can't Correct Track Lift Kit be Used with MORryde CRE3000
  Hey Brian, I believe you are asking about the Correct Track lift kit part # RR23QX and why it can't be used with the CRE3000 kit like part # MR87ZR. The clearance issue is the square brackets of the Correct track that would need to attach to the outsides of the CRE3000 but the angled brackets on the silver part of the CRE3000 prevent the square bracket from being able to sit flush with the equalizer. That's why the cushioned equalizers that do work like the part # LC279688 have a totally...
  view full answer...
• Recommended MORryde Rubber Equalizer for a Tandem Axle Trailer
  Hey Lee! Thanks for your question but I do not have a database that will show me the wheel base on your 2010 Keystone Hideout 27DBS. You'll need to measure from the center of one axle to the center of the 2nd axle to determine what you wheel base is. These are going to be your two options: 33" Wheelbase - MORryde Rubber Equalizers for Tandem Axle Trailers item # MR87ZR 35" Wheelbase - MORryde Shock Absorbing Suspension Equalizers item # MR27ZR I have linked a diagram I made showing...
  view full answer...
• Best Suspension Upgrade For 2015 Keystone Passport UltraLite 238ML
  Hey Charles, I can certainly point you in the right direction. The best way to upgrade your suspension is with an upgraded equalizer and wet bolt/HD shackle kit. I really like the kits from MORryde since their cushioned equalizers and bolt kits tend to make a huge difference in ride quality, and they last a really long time. That said, I do not have a way to look up your travel trailer to know exactly which suspension components will fit, but we can still get you well on your way. The...
  view full answer...
• Upgraded Equalizer for 2014 Winnebago 2351DKS
  Hi Jeff; the MORryde # MR87ZR won't be a good fit since it measures 6-1/2" on center. When you upgrade the equalizer you want to use one that matches your current measurement if possible. This keeps your geometry suspension the same so you won't end up with problems instead of a nice upgrade. Also, you won't really notice a difference between brands so matching the equalizer size is the most important factor when choosing one. Based on your measurements I recommend the Dexter E-Z Flex...
  view full answer...
• Best Suspension Upgrade Between MORryde, Equa-Flex, and Road Armor for Tandem Axle Trailer
  Well you've reached out to the right place, Kaivon - I'd be happy to help you navigate upgrading your trailer suspension! All three of those suspension kits you asked about are great, but my recommendation is using the MORryde Rubber Equalizers because they are the best. You'll need one of the following depending on your wheelbase (distance between center of axles), and you'll want to reference the attached photos from their qualification guide to make sure this will work with your trailer: ...
  view full answer...
  
• Replacing Shackle Straps After Switching To A Taller Equalizer
  Hi Mike, With the height of your equalizer increasing an inch you might need to switch to 3-1/8" shackle straps # TRSL313 to keep the leaf spring stack level but this isn't an exact science so your leaf springs could end up sitting too close to the equalizer and will bind up. Your suspension should form a 'W' shape with the equalizer and shackle straps for proper suspension travel. Too far in or out with your shackles will cause binding or will flip the axles down on the equalizer. Because...
  view full answer...
• Over Under Kit and MORryde Cushioned Equalizer and Wet Bolt Kit for Grey Wolf 23MKBL
  Since you have 3,500 lb axles that are 2-3/8 inch in diameter the correct over under kit would be the part # K71-384-00. For a cushioned equalizer kit the part # MR87ZR would be what you'd want and then for the upgraded hardware kit you'd want the part # MR46ZR.
  view full answer...
• How to Determine if MORryde CRE3000 Will Fit 2021 Kodiak Ultimate 2921FKDS
  Hey James, there isn't a specific trailer fit list for the upgraded equalizers like the MORryde part # MR87ZR but it is pretty easy to determine if this will fit or not. Measure the distance between the axle centers and if it's 33 inch this kit will work. If instead it's 35 inch you'd need the part # MR27ZR. If you have something different let me know and I'll see what's your best option but these two wheelbases are the two most common.
  view full answer...
• Should Dexter EZ Flex Equalizers get Replaced by MORryde CRE3000
  Hey Kris, if your EZ Flex equalizers are worn out or on the way out then yes it would be a good idea to replace them with the CRE3000 part # MR27ZR if you have 35 inch wheelbase or the 33 inch wheelbase part # MR87ZR. If they are in great shape I don't think you'll see much of a benefit. What shape are they in?
  view full answer...
• What Bearings, Shackle Straps, and Equalizers do I Need to Upgrade Suspension 2022 Keystone Passport
  Hello Peter, Happy to get the right parts for you. Upgrading your suspension parts is always a great idea for a smoother ride. I do not have a database that supplies me with what is put on what camper (would be pretty sweet if there were such a list). Based on my research, I see that the 2022 Keystone Passport 219BH is equipped with (2) 3,500-pound axles. Since I don't have a list, I would double-check your axle tags to confirm. - Bearing kit (1 per wheel): Hub Bearing Kit for Lippert,...
  view full answer...
• Upgraded Equalizer And Shackle Kit For 2021 Jayco 267BHS
  Hello Nick, thanks for reaching out. When replacing your equalizer, the replacement must be identical in size to the stock equalizer. There is a small amount of wiggle room, like 1/2" or less, but any more than this can throw your suspension out of center. There are ways to lift a trailer, but a taller equalizer is not one of them. That said, if you want an upgraded equalizer, your best option will be the Dexter E-Z Flex # K71-652-00. This measures 5-3/4" long and 2" tall so this is perfect...
  view full answer...
• How to Tell If MORryde Rubber Equalizers Will Fit Trailer
  I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers # MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that this kit is for up to 8K axles with a 33" wheelbase, and then the eyelets measure 6-1/2" apart on center and 3-1/8" down from the hanger (see attached). If this matches what you have then you can use this kit. If this doesn't match what you...
  view full answer...
  
• Recommended Replacement Equalizers, Bolts, Bushings And Shackle Straps For Tandem Axle Horse Trailer
  We currently will not have a kit that contains everything that you are looking for but we do have all the parts you will need. First I recommend upgrading your equalizers to the MORryde Rubber Equalizers for Tandem Axle Trailers # MR87ZR. These cushioned equalizers will help to extend the life of your suspension components by absorbing the harsh road shock and reducing back and forth chucking. This will equal a better ride for your horses as well. Pair this with the MORryde Suspension...
  view full answer...
  
• How to Determine Which MORryde Premium Rubber Suspension Kit Fits 2020 Forest River Wildwood 27RKSS
  To determine which MORryde Premium Rubber Suspension Kit fits your 2020 Forest River Wildwood 27RKSS you will have to measure your wheelbase. To determine your wheelbase, measure the distance between the center of your front wheel to the center of your rear wheel. If you have a 33" wheelbase you can use the # MR87ZR. For upgraded shackle straps I recommend the MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR46ZR which uses 1/2" thick shackles so you can feel confident that...
  view full answer...
  
• Determining The Correct Replacement Equalizers For A Tandem Axle Trailer With 5,200lb Axles
  Hey Mike, To determine if the MORryde Rubber Equalizers for Tandem Axle Trailers # MR87ZR would be a compatible fit you'll first want to measure the bolt hole spacing on your current equalizers. The # MR87ZR has a 6-1/2" center to center spacing for the shackle strap bolt holes and a 3-1/4" height from the hanger bolt hole down to the center of the shackle strap holes. Changing the spacing can alter the way the suspension travels and could potentially cause a bind so we always recommend...
  view full answer...
• Replacement For 24 Inch 3,500 lb Leaf Springs & Equalizer Upgrade
  Thanks so much for that info, and to replace your current leaf springs that are 24 inches apart from center eye to center eye, you want springs that are slightly shorter because over time they flatten out. So for replacements I recommend 23-1/8" long springs: - 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long # e59SR Then to replace your equalizer with a MORryde equalizer, you'll want to measure your axle from center to center, which will be your wheelbase, and the correct...
  view full answer...
• Upgraded Suspension Kit For Arctic Wolf 5th Wheel Trailer
  Hey Calvin, For a suspension upgrade kit on your Arctic Wolf 5th wheel trailer what you need to do is measure the length of your shackle straps from center to center to get the right length. Based on those lengths you will need either of the following: - MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps # MR46ZR - MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps # MR76ZR If your shackle straps aren't either of these...
  view full answer...
• MORryde CRE3000 Equalizers, X-Factor Cross Members & SumoSprings For 2020 Keystone Outback 291UBH
  Thank you for the images. The MORryde Rubber Equalizers # MR87ZR are the correct set for your 2020 Keystone Outback Ultra-Lite 291UBH. You will pair this with the MORryde Suspension Upgrade Kit # MR46ZR. Instead of using the wet bolts included with the upgrade kit you will use the wet bolts included with the 3 MORryde X-Factor Crossmembers # MR33WR. You are still able to use 2 sets of the SumoSprings Trailer Helper Springs # SS26MV with your suspension. These kits include line relocation...
  view full answer...
  
• Recommended MoRryde Equalizer and Replacement Shackles for a 2023 CrossRoads Sunset Trailer
  Thanks for the measurements and additional information! To determine which MORryde Equalizer you need you'll want to measure the distance at the bottom of your current equalizers from the center to the center of the bolt holes. The MORryde item # MR87ZR measures 6-1/2" and is for 33" wheelbases. The MORryde item # MR27ZR measures 8" and is for 35" wheelbases. I have linked a couple of diagrams below. To replace your 2-1/4" shackles, I recommend the MORryde Suspension Upgrade Kit item...
  view full answer...