Complete Breakdown of the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles Video

Hey Bruce, thanks for reaching out. Yes, the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e44SR will absolutely be adequate for the 5,200 lb axles on your 2023 Grand Design 2670mk. As long as the original springs were also 25-1/4" long,…

Hi Todd, To go with trailer leaf springs that are slightly stiffer than the 4,400 lb rating of your axle you can go with 4,500 lb springs or 5,000 lb springs. The right one is going to depend on the length of your current springs though, as…

Hey Mark, since we know your 2022 Imagine 2400BH trailer has 3,500 lb axles the correct bearing kit would be the part #TMK52VR. Bearing replacements are all based on the axle capacity of the trailer. Are you looking to have a spare set on hand or do…

What's up, Chuck? You can definitely use higher-rated springs for your trailer, and for that I recommend checking out the 25-1/4" Long 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles #DX95CR. Be sure to change out the leaf springs on…

Hey Rob! Both the 25-1/4" long item #DX95CR and item #e44SR springs will work if you're replacing a 25-1/4" long leaf spring. They're close enough in capacity so long as you're not using too light of a spring with the 4,400 lbs…

It's okay to replace leaf springs with ones rated for more weight and pretty common to do so but keep in mind, the higher you go the rougher the ride will be. If you have a utility trailer then I'd probably opt for the higher rated 5,000 lb…

Spring Hanger location dimensions are normally figured by the manufacturer and provided with the spring hanger kit, that includes all of the parts for installing the springs on the trailer frame. I have provided a chart that shows the spring hanger…

Hey Tinno, it sounds like you are asking if there's a garnish or spacer for the Vitrifrigo C115i OCX2 RV Mini Fridge #VT54FR to make up for a 5 inch height difference? It does have a flange on that is about 2 inches but we don't have anything…

I have two options for you to raise your trailer and gain more clearance between the fender and tire. The most cost effective option would be to flip the axles with a Dexter Trailer Springs Over-Under Kit part #K71-384-00 or part #K71-385-00. That…

The Grease Seal - Double Lip - ID 1.719" / OD 2.565" #RG06-050 is the same as the Dexter Axle grease seal part K71-303-00 as well as part 010-019-00 that we list on the product page. Dexter will change their part numbers from time to time…

Hey David, thanks for reaching out! To replace the leaf spring that fits with your 5,200 lb Lippert axle you likely need the 26" Long 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles #e94SR, but you'll need to measure from center-eye to…

Hey Phil! Thanks for getting back to me with those measurements! We have a leaf spring that is an exact replacement but I am guessing it's the pricey one you referenced. It is the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4"…