Recommended Hitch For A 2011 Toyota Camry LE V6 With Dual Exhaust

Question

Question:

I have a 2011 Camry LE v6 with dual exhaust. I notice this hitch is a confirmed fit with the SE model excluded. Is the exclusion due to the dual exhaust? Richard

asked by: Richard H

0

2011 Camry SE with Dual Exhaust
(click to enlarge)

Expert Reply:

Hey Richard, for your 2011 Toyota Camry LE V6 with the dual exhaust, I actually recommend the Draw-Tite Hitch # 36416. This hitch was designed with the dual exhaust models in mind, and we have had many customers report back to us that it will fit the SE and LE dual exhaust models. So, the dual exhaust is not an exclusion. I have included a few pictures below with examples.

expert reply by: Jesse M

0

Draw Tite 36416 Hitch On Dual Exhaust Camry SE
(click to enlarge)

Draw Tite 36416 Hitch On Dual Exhaust Camry
(click to enlarge)

Richard

3/27/2024

Thanks Jesse - you have answered my question.

Answer 1

For a 2013 Camry, you'd want to use the Draw-Tite Class II, part #36540. This hitch will fit a vehicle with a dual exhaust. The #36416 hitch you referred to is a fit for the 2007-2011 Camry, so it won't fit your 2013 model.

view full answer...

Answer 2

Hello Harold, thanks for reaching out. I drive a 2006 Corolla so it is cool to see those older Toyotas still on the road. They don't make 'em like the used to lol. Anyway, we actually do have one hitch that is confirmed to fit the dual…

view full answer...

Answer 3

It looks like the brake light and running light wires on harness #118405 plug into the same location on a 2009 Toyota Camry. Check the converter wiring going into the converter to see if power is at that point since it is already at the tail light.…

view full answer...

Answer 4

The Hidden Hitch, part #90152 (no longer available), and the Draw-Tite, part #36416 are essentially the same hitches. Draw-Tite and Hidden Hitch are sister companies and these hitches were probably built using the same jigs. The difference is, as you…

view full answer...

Answer 5

Yes, the Draw-Tite Class II Trailer Hitch, part number 36416, will fit your 2008 Toyota Camry SE. You will need a drawbar and a properly sized hitch ball along with a wiring harness to complete your towing setup. The Class II Drawbar 2-5/8" Rise…

view full answer...

Answer 6

On the 2009 Toyota Camry, all of the hitches available are Class II 1-1/4 inch hitch openings. The hitches will have a 3,500 lb. Gross Towing Weight and a 300 lb. or 350 lb. Tongue Weight. There is not a 2 inch hitch available for your vehicle,…

view full answer...

Answer 7

I checked with my contacts at Hidden Hitch, Draw-Tite and Curt, regarding the fit of the Curt #C12343, the Hidden Hitch #90152 (no longer available) and Draw-Tite #36416 Class II trailer hitches on your 2011 Camry. There would be absolutely no fit…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Hitch For A 2011 Toyota Camry LE V6 With Dual Exhaust

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching