bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 1-1/4 Inch Hitch
  4. Class II
  5. 3500 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2016 Ducati Hyperstrada
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: C12343
In Stock
$226.33
Retail:$376.95
You Save: $150.62
Trailer Hitch
Not Confirmed to Fit

2016 Ducati Hyperstrada

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use, and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number C12343 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (150)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C12343

  • 1-1/4 Inch Hitch
  • Class II
  • 3500 lbs GTW
  • Visible Cross Tube
  • 350 lbs TW
  • CURT
  • For Towing

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



12343 Curt Class 2 Trailer Hitch Receiver

Installation Details C12343 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.7

150 reviews
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:

Easy to install. Looks good.



by:

Highly recommendedAwesome experience. Products received FAST!!!!



by:

very well made--haven't got around to install it yet, but directions make it look very easy.



by:
2011 Toyota Camry

Took less that 1 hour to install on my 2011 toyota Camry. Looks real nice.



by:

Very happy with hitch! Fits great on my Camry!



by:
Lexus

Got my trailer hitch for our Lexus two days early. Took it to a local shop and they installed it in one hour. It looks like the car came from the factory with it on. It was engineered perfectly! Will send photo.



by:
Lexus ES 350

Looks fantastic on the Lexus ES350 you can hardly tell it's there. Had to lower the dual exhaust a ince or two but barely noticable. Item was too heavey for the boxing and was coming out of the box when delivered. Took 1.5 hours to install by one person and a perfectionist.



by:

I was very satisfied with your the assistance from the sales personnel, secretaries, and the promptness and arrival of my car hitch. Keep up the good work!



by:

Excellent productThe product was as advertised, recived in timely manner, and installation was as advertised.



by:

Nice hitch, mounted up perfectly. The video instructions made installation FAST and EASY!



by:
2011 Toyota Camry

Very well constructed, relatively easy to install, with hole alignment the most troublesome. Would have been easier with two people or if the car had been on a lift.


Installed it on a 2011 Toyota Camry.



by:

Took longer to install.The hitch quality is wonderful. But the wires for the lights had to be run along the inside of the car to the battery. We assumed that would not have been the manner of hook up.



by:

Install of the #12343 HitchWhen I ordered the hitch I was unsure of the product and the stated install time, some companies will say anything to "sell the product". I received the hitch a lot sooner than I expected and the install went extremely smooth and I easily installed it under the time given. I have been a metal worker/welder most of my working life and the hitch is well built and looks good, I couldn't be happier. I am sick of Chinese junk, I buy American made when I can and I love the "made in the USA" label. Good job guys! Jerry S.



by:

Havent' installed yet, but product arrived well packed, tightly wrapped, with all hardware required and clear, printed instructions on installation. I purchased this unit from this company because of the excellent on-line installation video, the information (which let me select a unit 7 pounds lighter than the others but with a higher tow rating), and the ease of use of the website. They shipped within 24 hours and the hitch arrived in 3 days, with free shipping. Product is in excellent shape, very well painted, and ready to install. All parts and fasteners are present. I will definitely use this company again if I need their products.



by:

Fantastic service! Shipped fast (even faster than advertised). The online tutorials were very helpful! I had my tow hitch up and running in no time, thank you for a great experience!



by:

Shipping was very fast. Product was easy to install and mounted up to strong part of the car's body where the factory had placed weld nuts. The hitch is attractive beneath the bumper and I gave it a coat of wax!



by:
2007 Toyota Camry

TWO MAN JOB! Hitch went on just as described, but definitely NOT a one man job. Prior to purchase I was having a hard time finding info anywhere online about installation on '07 Camry with DUAL EXHAUST. Bought hitch anyway, and can verify that it DOES WORK with dual exhaust setup. Exhaust system was well enough supported that we did not need to use additional support after removing bolts. Be sure hitch brackets are sandwiched BETWEEN frame and exhaust brackets when installing. Excellent design of hitch ensures there is minimum clearance between bottom of bumper and top of hitch, so you get maximum road clearance. Have not pulled anything with it yet, but design looks really SOLID with four bolts in each the two brackets.



by:
Toyota

The Curt Trailer Hitch Receiver was delivered on time and arrived in very good condition.
I had watched the on line installation video to get an idea of the steps needed. This confirmed that I could install it with the pre existing weld nuts and support provided by Toyota. The actual instructions provided with the hitch were sufficient without the video.
I would recommend this hitch for this vehicle. Very simple and easy even while laying underneath the back bumper. No lift required.



by:
2010 Lexus ES 350

Love the 1 1/4 receiver hitch on my 2010 Lexus ES350. Don't see many Lexus' with trailer hitch but I absolutely love it for hauling my bikes off the back with my Kuat carrier. Ground clearance is excellent as are aesthetics!



by:

I was concerned when the box arrived with a taped up hole where the hitch punched through. Luckily the hitch flanges were flat and hole patterns aligned to the car frame. The hitch installed perfectly. I had only one slight complication on this 2010 Lexus ES350. The M10 bolt most outboard on the driver's side is somewhat blocked by the muffler tip. Torquing this bolt required a 6-point socket while flexing the muffler inboard to avoid damaging the bolt head. I appreciate that the end of the receiver tube does not protrude past the bumper. This is a well designed trailer hitch.



by:
2011 Toyota Camry

Good clear directions from Curt, and a GREAT video from etrailer.com. Only issue in install was the weld nut in the sheet metal support of the muffler hanger was rusted on for me. Had to use a dremel to grind it off, but that is typical here in Wisconsin with road salt, and a seven year old car. Hitch and hardware was great.

The one other annoyance was that the UPC needed for the Curt rebate was stuck to the hitch from Curt so I had to take it off with care for my rebate. Well worth the rebate.



by:
2009 Toyota Camry

My Iowa 2009 Camry has been in a garage it's whole life, so, that helped a lot.
Used [online] etrailer video for ease of work. I took longer than they did as I had to work a bit to de-rust a couple of female bolt threads enough to get a bolt on easily.

James profile picture

James

11/26/2023

Ive had no issues with the hitch. Works perfectly! Id by it again, if I needed it.



by:
Toyota Camry

The hitch was so easy to install! Took my husband forty minutes. He loves its beefy feel - should outlast our Camry, itself. Now we can make quick trips to the dump and haul wood from the woodshed up to the porch...

Katherine H. profile picture

Katherine H.

1/29/2016

No issues at all! Still works without a hitch!

Katherine H. profile picture

Katherine H.

2/6/2016

I submitted a comment but would like to add that we use it all the time. Weve hauled gravel and lumber. Still works perfectly!



by:
Toyota Camry

I'm not an auto mechanic; I'm just a simple school teacher, but mounting the hitch receiver was not terribly difficult. I watched the online video, jacked my Camry off the ground, unscrewed all the existing bolts, and put the hitch receiver on without much trouble. An hour and a half later and I was done. Truly a perfect fit. It looks like a professional instal, and I feel accomplished.



by:
2007 Toyota Camry

Purchased for my 2007 Camry LE
Overall
good product with good hardware. Only issue I really had was directions saying a 45 minute install? Took me 3-4hours since I live in Wisconsin, things were rusty.

Sam profile picture

Sam

4/19/2022

In the past year of havithis hitch, Ive used it several times and each time Im glad I made this purchase. Well worth it if youre looking for an easy way to add towing capabilities to your car.


25
150
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Availability Of 2" Hitch Receiver For 2010 Toyota Camry XLE
    Hello Joshua, thanks for reaching out. I wish I had better news but there isn't a 2" hitch receiver made for the 2010 Toyota Camry. Like you said, the vehicles tow rating puts it in the 1-1/4" category, and hitch manufacturers just don't make 2" receivers for it. That said, there are some solid bike racks that will work with the class II 1-1/4" receiver on a Camry. What I recommend is the Hollywood Racks Sport Rider SE Bike Rack # HLY74FR. It can carry two e-bikes weighing up to 80 lbs...
    view full answer...
  • Recommended Trailer Hitch For 2008 Toyota Camry SE V6
    Yes, we do have a hitch that will fit your 2008 Toyota Camry SE V6, but the item you selected, Curt Trailer Hitch, part # 12343, will not fit the SE model of the Camry. I would recommend the Draw-Tite Trailer Hitch Receiver, part # 36416, which is a Class II 1-1/4 Inch Hitch. To complete your towing setup you may be interested in the following: Draw-Tite Ball Mount, part # 36071 1-7/8 Inch Hitch Ball, part # 19256 2 Inch Hitch Ball, part # 19258 Pin and Clip, part # PC2 T-One Vehicle Wiring...
    view full answer...
    Image 1 for
  • Recommended Hitch For A 2011 Toyota Camry LE V6 With Dual Exhaust
    Hey Richard, for your 2011 Toyota Camry LE V6 with the dual exhaust, I actually recommend the Draw-Tite Hitch # 36416. This hitch was designed with the dual exhaust models in mind, and we have had many customers report back to us that it will fit the SE and LE dual exhaust models. So, the dual exhaust is not an exclusion. I have included a few pictures below with examples.
    view full answer...
  • Looking For Trailer Hitch For 2009 Toyota Camry
    Hello Chris. We do offer a hitch for the 2009 Toyota Camry. For that I recommend the Curt Class 2 Hitch # C12343. This has a 1-1/4" receiver and is rated for towing up to 3,500 lbs. You will find a link to our install video linked below. If you plan to tow a trailer you will also need the Curt T-Connector # C55567.
    view full answer...
  • What do I Need for a Complete Tow Package for My 2009 Toyota Camry?
    Hello Douglas, You will need to check your owners manual to see what Toyota says your Camry can tow, just because a hitch is rated higher doesn't mean you should be towing that much with your vehicle. The highest rated hitch that we have fitting your 2009 Toyota Camry is the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12343. If you need some wiring to go with it for some light towing or a hitch mounted accessory, the T-One Vehicle Wiring Harness with 4-Pole Flat...
    view full answer...
  • Best Hitch for 2011 Toyota Camry LE
    Hey Angel! For your 2011 Toyota Camry LE I recommend the Draw-Tite Trailer Hitch Receiver # 36416. I like this better than the Curt # C12343 since it doesn't have the cross tube hanging down and the clearance reduction that comes with it. The only downside to the Draw-Tite is it will require some drilling for installation. What will you be using the hitch for?
    view full answer...
  • Is A 2 Inch Trailer Hitch Available For A 2009 Toyota Camry
    On the 2009 Toyota Camry, all of the hitches available are Class II 1-1/4 inch hitch openings. The hitches will have a 3,500 lb. Gross Towing Weight and a 300 lb. or 350 lb. Tongue Weight. There is not a 2 inch hitch available for your vehicle, because a 2 inch hitch has to be rated as a Class III and a Class IV hitch. That means that the vehicle would have to be able to tow weights ranging from 3,500 lbs. to 12,000 lbs. The frame on your Toyota Camry would not be able to handle towing...
    view full answer...
  • Are All Bolts of the Curt Hitch C123433 Required for Installation
    You have to use all of the install hardware of the Curt hitch part # C12343 that you referenced. Sometimes it can be a bit difficult getting all of the holes to line up perfectly. What you will need to do is loosely install all of the hardware so that you can get all of the bolts started and then once they are all started then torque them all down.
    view full answer...
    Image 1 for
  • Will I Have to Trim the Underbody Panel of a 2010 Lexus ES350 to Install a Curt Hitch # C12343
    Yes, you will not have to trim the underbody panel of your 2010 Lexus ES350 in order to install this Curt Trailer Hitch Receiver with Drawbar - Custom Fit - Class II - 1-1/4, part # C12343. I have attached instructions in a link below for you to check out. You may also be interested in the following products: Hitch Ball with 2 inch Diameter and Short Shank, 3,500 lbs GTW - Chrome, part # 19258 Hitch Ball with 1-7/8 inch Diameter and Short Shank, 2000 lbs GTW - Chrome, part # 19256 Tow...
    view full answer...
  • Is Trimming of Fascia Needed to Install Trailer Hitch in 2007 Lexus ES350?
    I took a look at the installation instructions for both the Curt # C12343 hitch and the Draw-Tite # 36416 hitch to see if any fascia would need to be trimmed, and the Curt mentions that it may require fascia trimming. However, the Draw-Tite # 36416 will not, as you can see in the installation video I've linked showing the Draw-Tite being installed on a 2008 ES 350, which will be the same as on your '07 model.
    view full answer...
    Image 1 for
  • Trailer Hitch For 2007 Toyota Camry LE With Dual Exhaust
    Hello Harold, thanks for reaching out. I drive a 2006 Corolla so it is cool to see those older Toyotas still on the road. They don't make 'em like the used to lol. Anyway, we actually do have one hitch that is confirmed to fit the dual exhaust models of the 2007 Toyota Camry LE. For that I recommend the Draw-Tite Class 2 Hitch # 36416. This was designed specifically with the dual exhaust models in mind. We have had many of our own customers report back to us that it fits the dual exhaust,...
    view full answer...
  • How to Carry 4 Bikes on a 2009 Toyota Camry LE With an 1-1/4" Hitch
    While the newer Camrys have special 2" hitches designed for them, the selection of hitches for your 2009 Toyota have only 1-1/4" hitches like the Curt Trailer Hitch Receiver # C12343. The good news is that these are Class II hitches which gives you more options and weight capacity compared to most Class I hitches. Class I hitches can not carry more than 2 bikes, while Class II hitches can carry 4 bikes if you can get them to fit. You have two options from here. You can get a hitch expander...
    view full answer...
  • Can My 2010 Toyota Camry Class 2 Hitch Tow a 1,720 lb Trailer
    Great question Henry! For any and all towing setups you'll be limited by the least rated part of the towing gear. Your 2010 Toyota Camry being equipped with a Class II hitch with a 3,500 lb tow rating, like the Curt # C12343, is great, but when I looked up the online owner's manual for your vehicle it listed your vehicle as only being able to tow up to 1,000 lbs. So in your case the vehicle is the limiting factor at 1,000 lbs and you'll want to avoid towing a trailer weighing over that. This...
    view full answer...
  • Can a 2 Inch Trailer Hitch Mount Accessory be Used on a 1-1/4 Inch Hitch on a 2011 Toyota Camry
    It is possible to use your 2 inch accessories in a class II, 1-1/4 inch trailer hitch. You would have to use a hitch expander, 1-1/4 to 2 inch. However, the use of an expander will reduce the tongue weight capacity of the trailer hitch by 50 percent. It appears that the vast majority of trailer hitches for a 2011 Toyota Camry have a tongue weight capacity of 300 pounds. When using an expander, like # 80303, that capacity will be cut down to 150 pounds. This means that the weight of any...
    view full answer...
  • Towing Capacity and Trailer Hitch Recommendation for 2009 Lexus ES 350
    Based on my research, the 2009 Lexus ES 350 has a towing capacity of 1,000 pounds. I was able to find this information in section 2-5 of the vehicle's online owner's manual. I recommend checking your owner's manual to confirm this information. The trailer hitch I recommend for your 2009 Lexus ES 350 is the Curt Class II Receiver Hitch # C12343. This hitch will not require any drilling for installation. The Draw-Tite # 36416 will require drilling into the trunk pan of your ES 350. Both...
    view full answer...
  • Curt Trailer Hitch Receiver # C12343 Replacement Hardware Needed for 2007 Toyota Camry
    We have exactly what you need! Replacement Hardware Kit for Trailer Hitches, # RHK, includes all of the mounting hardware needed. Just go to the # RHK product page, enter the hitch number (C12343) and manufacturer (Curt) and you'll be set.
    view full answer...
  • Why is the Support Bracket on the 2011 Toyota Camry SE Not Reinstalled with Draw-Tite Class II Hitch
    The drivers side bracket is not reinstalled with the Draw-Tite Class II Trailer Hitch, # 36416, because the bracket will not fit once the trailer hitch is in position. I spoke with my contact at Draw-Tite and he says once the hitch is installed, the end plate and vehicle frame do not lose support. He said the trailer hitch ties into both end plates and the trunk pan so the support bracket is not needed. If you would like a trailer hitch that will mount to the end plate and the vehicle...
    view full answer...
  • Curt Trailer Hitch Receiver # C12343 Mounting Hole Bolt Spread For 2009 Toyota Camry
    I went to our warehouse an measured the holes on the Curt Trailer Hitch Receiver # C12343 for you Leo. The rearmost holes are spread 42" on center and the front holes furthest apart are 45-1/2" on center. I have included an image showing the measurement points for you as well.
    view full answer...
  • Trailer Hitch for 2011 Toyota Camry XLE Non-Hybrid
    For the 2011 Toyota Camry non-hybrid version we offer a 1-1/4-inch Class II hitches from several manufacturers and you can see all on the linked page. I recommend the Curt # C12343 because it costs less than the other options and because it requires no drilling for installation. An installation video and the written instructions are linked for you. The only special tool required to install the hitch is a torque wrench like # ALL944001. If you also need a 4-pole trailer wiring harness for...
    view full answer...
  • Recommend a Trailer Hitch To Carry Bike Rack on My 2011 Toyota Camry Hybrid
    The CURT Trailer Hitch, # 12343, will fit a 2011 Toyota Camry Hybrid. The CURT Hitch # 12343 is a Class II 1-1/4 inch receiver and includes a drawbar, pin and clip. The strap in question is the CURT Bike Rack Strap with Cambuckle, # 18050. CURT warranty requires, all non-trailer loads including such things as bike racks and cargo carriers, use a support strap. To maintain the warranty on the hitch, the strap will need to be used. Since you will only be using the hitch for a bike rack,...
    view full answer...
  • Which Type of Hitch do You Recommend for a 2009 Toyota Camry Hybrid
    Draw-Tite and Hidden Hitch are sister companies. The hitches use essentially the same design, the Hidden Hitch, part # 90152 (no longer available), does include a drawbar and pin and clip if you will be doing any towing. However, these two hitches have a tongue weight capacity of 300 pounds, not 350 like the Curt and Valley. If you will not be doing any towing, or your bike rack or cargo carrier load is under 300 pounds, I would not worry about it. The Curt hitch, part # 12343, also includes...
    view full answer...
  • Recommended Trailer Hitch Receiver and Wiring Harness For a 2008 Toyota Camry Hybrid
    I recommend the Curt Trailer Hitch Receiver # C12343 for your 2008 Toyota Camry hybrid. This receiver is going to be the easiest to install as it is custom fit and does not require any drilling to mount the receiver. The T-One Vehicle Wiring Harness # 118482 will allow you to control the lights on small trailers you may tow. And these can also be used with Auxiliary Lights # C53201 if you have a hitch mounted accessory that impairs the view of your tail lights on your Camry. The Mounting...
    view full answer...
  • What are the Torque Specs for the 2007 Toyota Camry Hitch # 12343
    Typical torque specifications for the CURT Class II Trailer Hitch, item # 12343, are listed in the hitch instructions, see link. At the bottom of page one, step 6 lists the torque specifications for your vehicle. When you purchase the hitch for your vehicle, you will want to use the torque rating that is recommended in the instructions provided for the hitch. Manufacturers change these ratings from time to time so using the instructions provided with the hitch will give you the most up...
    view full answer...
  • Recommendation for Hitch on 2009 Toyota Camry LE To Carry a Hoveround Power Chair With Hoverlift
    To use the Hoverlift on your 2009 Toyota Camry LE to haul the Hoveround Power Chair it does require to use a Class II or Class III hitch. All of the hitches that are available for your 2009 Toyota Camry LE are a Class II 1-1/4 inch hitch. The Draw-Tite # 36416 and Hidden Hitch # 90152 (no longer available) have a tongue weight capacity of 300 lbs. The Curt Class II 1-1/4 Inch hitch, part # 12343, has a tongue weight capacity of 350 lbs. I looked up the weight of the Hoverlift and it was...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Sue W
Video Edited:
Sue W
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924