What is the Difference Between the Draw-Tite and Hidden Hitch Available for a 2007 Toyota Camry LE

Question

Question:

On your website, there are two hitches for the 2007 Toyota Camry LE that look like they are the same: Hidden Hitch # 90152 and Draw-Tite #36416. Are they structurally the same same dimensions? Looking at the pictures, they look like the same hitch other than the additional features that the hidden hitch has per the website. Thanks in advance for your help!

asked by: Tom M

0

Expert Reply:

The Hidden Hitch, part # 90152 (no longer available), and the Draw-Tite, part # 36416 are essentially the same hitches. Draw-Tite and Hidden Hitch are sister companies and these hitches were probably built using the same jigs. The difference is, as you saw, the Hidden Hitch is packaged with the proper drawbar, pin and clip, sort of a complete starter kit.

expert reply by: Patrick B

0

Answer 1

It looks like the brake light and running light wires on harness #118405 plug into the same location on a 2009 Toyota Camry. Check the converter wiring going into the converter to see if power is at that point since it is already at the tail light.…

view full answer...

Answer 2

On the 2009 Toyota Camry, all of the hitches available are Class II 1-1/4 inch hitch openings. The hitches will have a 3,500 lb. Gross Towing Weight and a 300 lb. or 350 lb. Tongue Weight. There is not a 2 inch hitch available for your vehicle,…

view full answer...

Answer 3

I checked with my contacts at Hidden Hitch, Draw-Tite and Curt, regarding the fit of the Curt #C12343, the Hidden Hitch #90152 (no longer available) and Draw-Tite #36416 Class II trailer hitches on your 2011 Camry. There would be absolutely no fit…

view full answer...

Answer 4

Yes, the Draw-Tite Class II Trailer Hitch, part number 36416, will fit your 2008 Toyota Camry SE. You will need a drawbar and a properly sized hitch ball along with a wiring harness to complete your towing setup. The Class II Drawbar 2-5/8" Rise…

view full answer...

Answer 5

For a 2013 Camry, you'd want to use the Draw-Tite Class II, part #36540. This hitch will fit a vehicle with a dual exhaust. The #36416 hitch you referred to is a fit for the 2007-2011 Camry, so it won't fit your 2013 model.

view full answer...

Answer 6

Hey Richard, for your 2011 Toyota Camry LE V6 with the dual exhaust, I actually recommend the Draw-Tite Hitch #36416. This hitch was designed with the dual exhaust models in mind, and we have had many customers report back to us that it will fit the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

What is the Difference Between the Draw-Tite and Hidden Hitch Available for a 2007 Toyota Camry LE

Continue Researching