Don't Miss These Holiday Savings!
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (125 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.My Iowa 2009 Camry has been in a garage it's whole life, so, that helped a lot.
Used [online] etrailer video for ease of work. I took longer than they did as I had to work a bit to de-rust a couple of female bolt threads enough to get a bolt on easily.
Actual shipping, hitch arrival was days more than what was estimated/advertised. The box had substantial damage to the extent that the hitch was sticking out of one end of the box.
Jenny N.
11/14/2023
Oh no! I will have our Customer Service team reach out to you!
Muffler hangers were the literal hang-up on this install. WD-40 and a pair of wide mouth pliers did the trick. Put one end of the pliers on the flared pin and the other on the back of the rubber. When you squeeze the pliers it will pull the pin through due to the lubrication.
Hot tip: Start the thread one by one on the bolts without tightening up too much. This will allow you to still wiggle the hitch for aligning the remaining bolts. This is a really solid product!
Your service is great. The order arrived today, just a couple days after I ordered. I’m getting it installed this week and looking forward to using it with my utility trailer.
Purchased for my 2007 Camry LE
Overall good product with good hardware. Only issue I really had was directions saying a 45 minute install? Took me 3-4hours since I live in Wisconsin, things were rusty.
Sam
4/19/2022
In the past year of havithis hitch, Ive used it several times and each time Im glad I made this purchase. Well worth it if youre looking for an easy way to add towing capabilities to your car.
The Curt Trailer Hitch Receiver was delivered on time and arrived in very good condition.
I had watched the on line installation video to get an idea of the steps needed. This confirmed that I could install it with the pre existing weld nuts and support provided by Toyota. The actual instructions provided with the hitch were sufficient without the video.
I would recommend this hitch for this vehicle. Very simple and easy even while laying underneath the back bumper. No lift required.
Good clear directions from Curt, and a GREAT video from etrailer.com. Only issue in install was the weld nut in the sheet metal support of the muffler hanger was rusted on for me. Had to use a dremel to grind it off, but that is typical here in Wisconsin with road salt, and a seven year old car. Hitch and hardware was great.
The one other annoyance was that the UPC needed for the Curt rebate was stuck to the hitch from Curt so I had to take it off with care for my rebate. Well worth the rebate.
TWO MAN JOB! Hitch went on just as described, but definitely NOT a one man job. Prior to purchase I was having a hard time finding info anywhere online about installation on '07 Camry with DUAL EXHAUST. Bought hitch anyway, and can verify that it DOES WORK with dual exhaust setup. Exhaust system was well enough supported that we did not need to use additional support after removing bolts. Be sure hitch brackets are sandwiched BETWEEN frame and exhaust brackets when installing. Excellent design of hitch ensures there is minimum clearance between bottom of bumper and top of hitch, so you get maximum road clearance. Have not pulled anything with it yet, but design looks really SOLID with four bolts in each the two brackets.
Love the 1 1/4 receiver hitch on my 2010 Lexus ES350. Don't see many Lexus' with trailer hitch but I absolutely love it for hauling my bikes off the back with my Kuat carrier. Ground clearance is excellent as are aesthetics!
The hitch was so easy to install! Took my husband forty minutes. He loves its beefy feel - should outlast our Camry, itself. Now we can make quick trips to the dump and haul wood from the woodshed up to the porch...
Katherine H.
1/29/2016
No issues at all! Still works without a hitch!
Katherine H.
2/6/2016
I submitted a comment but would like to add that we use it all the time. Weve hauled gravel and lumber. Still works perfectly!
I'm not an auto mechanic; I'm just a simple school teacher, but mounting the hitch receiver was not terribly difficult. I watched the online video, jacked my Camry off the ground, unscrewed all the existing bolts, and put the hitch receiver on without much trouble. An hour and a half later and I was done. Truly a perfect fit. It looks like a professional instal, and I feel accomplished.
It didn't fit the Lexus. The installer had to elong the holes on one side to complete the installation.
Jenny N.
2/10/2023
It sounds like that the side brackets were knocked out of alignment which is why the bolt holes are not lining up. This can happen while in transit to our facility or to you. We do have a great FAQ that provides ways to move the brackets back into alignment so the hitch can be installed.
Helpful Links
Solid hitch. I’ve been lugging my bikes around for the last year with no issues at all. Highly recommended. Etrailer also has great service and prices. Lifetime customer.
odering process and help from you and others was excellent, top notch.
My hitch will be installed on feb.9. Once completed i will get back to
and give you my opinion on teh product.
Shipping was very fast. Product was easy to install and mounted up to strong part of the car's body where the factory had placed weld nuts. The hitch is attractive beneath the bumper and I gave it a coat of wax!
This hidden hitch fits very well. Instruction were clear and accurate. Installation was time consuming yet problem free. eTrailer order/shipping process was quick and event free. This is my second hitch from them and I’ll be back for my next one when that time arrives. Highly recommended!
Great product, took a little longer for me to install because of a factory misaligned bolt hole, but would fit perfectly for others.
Pulling a utility trailer just fine with my Camry.
Fantastic service! Shipped fast (even faster than advertised). The online tutorials were very helpful! I had my tow hitch up and running in no time, thank you for a great experience!
etrailer provides a good service. the product and wiring sellection was done right . Customer service ordering shipping, tracing was excellent.
I had the trailer hitch installed on our 2007 Camry by my auto mechanic.
His comment was the wiring was a little more "complicated" than other installations
the total installation time was 2 1/2 hours
Jcf
5/29/2014
the trailer hitch is still very reliable. My only suggestion would be to add the plastic plug as part of the hitch package.
The product is perfect. Installation was a breeze, after watching the video's. Installation time was estimated at 45 Min. I had it installed in 30. The packaging is not very good. When the receiver was left on my doorstep, it had burst through the end of the box causing some minor scratching. (It is going to spend the rest of its life under my car, so I doubt a few scratches are worth a reduced rating). I have towed a 5x8 utility trailer with it several times, and it has performed perfectly. No drilling necessary, the only specialty tool required is a torque wrench.
Ray G.
6/6/2017
After a year and heavy use, the hitch is holding up well. I still recommend this product to anyone that is looking for a receiver hitch for light duty use on their car.
Great hitch, receiver, works really well, nice and stable.
Second trailer hitch purchase I've mad through e-trailer and definitely won't be my last. Product arrived on estimated date. The hitch had ripped through the box, although I'm sure this was caused by the shipment company. Doesn't matter really, it's a trailer hitch, it hangs off the back of your car so it won't stay perfect for long. Hitch took about 10 minutes to install (however I am a trained auto tech with access to a lift and full set of tools, so installation won't be as easy for a do-it-yourselfer). I use it to hold a hitch-mounted bike rack. No intentions of ever using it to tow an actual trailer, but it works great for what I use it for.
I am thrilled with the trailer ball & hitch I purchased from you one year ago for my Toyota Camry. I have used the hitch numerous times to rent U-Haul trailers rather than trucks (which you have a mileage fee on) and saved more than triple the cost of my purchase.
As the mom to a college aged daughter, I was the one to help her & her friends move out of the dorms, into their first shared apartment & delivered the gently used furniture we found online to furnish their first digs.
Most recently I helped them move to a furnished shared flat and was able to haul their furniture to both a consignment store & a donation center so that their finds can live on and make other families happy.
The products I purchased from etrailer.com still looks and perform like new. Thank you, Erica, for your professional advice and support. I highly recommend etrailer.com to everyone I meet!
Sincerely,
A grateful Mom
4 out of 5 stars because it is a hair off to the left. Although it won't make a difference for my bikerack application, that's not the point. I didn't notice at first, but then loosened it and discovered there is no lateral movement. I then noticed a picture of another customers review and it is the same as mine. About 1/2 to 3/4 of an inch may not seem like a lot, but being a jeweler, if I was to set the customers center stone a hair off on her wedding ring, she would have my head on a platter! It is either on or off and in this case it's off. Aside from that it is a quality hitch and it was super easy to install.
2007 lexus es350 tows my boat great. Rides and tracks smooth at 65mph. Boat is 14ft. handles the same with or without boat. I used the Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs and it sits very level.
5 stars for sure
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
11/26/2023
Ive had no issues with the hitch. Works perfectly! Id by it again, if I needed it.