Trailer Hitch Receiver For a 2024 Nissan Frontier Pro/4 Crew Cab

Question

Question:

will is fit 2024 nissan frontier crew cab pro/4

asked by: Essel S

0

Expert Reply:

Yes, the Curt Trailer Hitch Receiver # 13241 will fit your 2024 Nissan Frontier crew cab Pro/4. I recommend installing the T-One Vehicle Wiring Harness # 118266 with this so you have a 7-way connector. You could replace the end connector for the 7/4-way # HM40975 or use an Adapter # PK12716 for smaller trailers that use a 4-way flat.

expert reply by: Bud M

0

Answer 1

Hi Damon! All the hitches we have for your 2025 Nissan Frontier will need a weight distribution system to get above the 5,000 pound capacity. This is likely due to the 4,500 pound curb weight of your truck (4x4 options). You really don't want…

view full answer...

Answer 2

Both hitches are class 3 with 2x2 inch receiver openings and both can use weight distribution systems. I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98869. A notable difference is the safety…

view full answer...

Answer 3

If you're buying it without the tow package, Norm, then the wiring is not going to be at the rear. To install a brake controller you're going to first need to add the T-One Vehicle Wiring Harness with 7-Way Trailer Connector #118266 which…

view full answer...

Answer 4

To add a hitch to your 2023 Nissan Frontier you are going to want the Curt Trailer Hitch item #13241. This hitch is custom fit and bolts to your Frontier with included hardware. I really like the Curt hitch because it installs behind your rear bumper…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Trailer Hitch Receiver For a 2024 Nissan Frontier Pro/4 Crew Cab

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching