bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 5000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13241
Our Price: $183.19
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 38 lbs
In Stock
CURT Trailer Hitch - 13241
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13241 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (338)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - 13241

  • Class III
  • 2 Inch Hitch
  • 5000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 500 lbs TW
  • 8000 lbs WD GTW
  • 800 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
      • Maximum GTW when used with weight distribution: 8,000 lbs
    • Maximum tongue weight: 500 lbs
      • Maximum TW when used with weight distribution: 800 lbs
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

13241 Curt Class 3 Trailer Hitch Receiver

Installation Details 13241 Installation instructions

This Product Fits The Following Vehicles

Customer Satisfaction Score:

Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13241

Average Customer Rating:  4.7 out of 5 stars   (338 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Fairly quick shipping for a new model year vehicle. 15 minutes to install and looks great, and we'll made. Would highly recommend etrailer.

After 1 year of use and I towed a lot when we moved to a different state last year. It has been rock solid. I retorqued the bolts once that’s it.
Walt - 10/28/2022

2015 Nissan Frontier

To no fault of etrailer, I was very surprised of the poor attention to detail with a product manufactured by Curt. Although made of a good heavy gauge steel with a nicely painted finish, the prefabricated bolt hole cutouts did not match up accurately regardless of which bolt I started with and did not tighten down until all bolts were adequately able to be started as this receiver is designed to be mounted.
If it weren’t for having the ability to slightly bend one side of the mounting bracket, this particular receiver would not have been compatible to be properly installed as designed on a 2015 Nissan Frontier SV.

While it is not super common, it can happen where the side brackets of a hitch are knocked out of alignment. When the hitches are shipped to us they are shipped stacked together in large pallets which means that at times they arrive with slightly bent brackets that are not visible until the hitch is installed. You have already done what we would recommended by bending it back into placed. We do have an FAQ that has suggestions on how to do so.
-- Etrailer Expert Jenny N - 01/13/2023


Hitch (Part 13241) and electrics (Part 118266) arrived on time, 40 minutes later everything was installed and connected. Had to ream out the washers to fit the bolts and drill new holes in the Mounting Box (Part 18157) to fit the 7-Way connector ... overall good value.

One year down the road still performing according to expectation.
Parms - 08/14/2016


perfect fit. only drawback is no mount plate for trailer wiring kit as with other (u-haul) hitches. but my nissan had a couple of holes in bumper frame I adapted for the connector.

2012 Nissan Frontier

One side was bent in making it so I had to use a C-clamp and clamp the drivers side to the frame of the Nissan Frontier and draw it over into place. Once there, I had to also ream the last remaining bolt hole because the bracket was too far forward.

I have read other people have had this problem and etrailer has claimed the metal can spring back during shipping.

I have two things to say on this.

One, metal does not randomly spring out of place. The bracket had to be either not tacked in 4 places before it was welded, which makes the welding process draw that side piece over, or the fit and cut was done improperly.

Two, if they now this happens, then they should put a little slop in some of the holes , so we can work it around.

Other than that, it is a hitch, what more can I say?


Nice, affordable, and good quality hitch. Put on a bike rack on it, and also towed a car trailer with it. I like it.


The first thing I will say was the customer service at was awesome. I called up with some questions they were answered and I was guided in the right direction and got the right product for my 2012 Nissan front tier crew cab pick up but more importantly there's no high-pressure sale or buying things I did not need. That to me just as a consumer says a lot that you can call a company get an American on the phone will give you good customer service and advice that's getting to be a rear concept nowadays. The hitch arrived as ordered and after some cleaning out and lubrication of the weld nuts on the frame it was easy to install I guess where the hitch on top of me and did kind of a benchpress motion to secure it with a couple bolts then was able to snug it up. The only complaint I had was installing around the muffler they just seems to be one bolt the does not want to get snugged up. It took some finessing and for all I know it's probably cross threaded in there but it's in there forever now not really any trailers fault or Curt hitches fault it seems to be a poor design by Nissan that unless you have some mongoloid long extension it's hard to snug up that bolt. The curt hitch seems very well-made and I like the fact that it is a America and keeps jobs in this country plus you can really tell the extra coating is on there which is nice here in Massachusetts with our salt filled winters. If I had a longer extension I think it would've been easier to install around the muffler but the total install time start to finish for me was only about 12 minutes and I did it myself.

Maybe you had the same problem I had! Five of the bolts shipped were the correct size 12M-1.25 and one was the wrong size M12-1.50! Good thing I screwed the bolts by hand first and when the odd one would not screw in easily, I gave it one turn with a wrench. It was still not going in so I unscrewed it and took it to Lowes to find out if it was the right size. Tried it out on the nutbolt board they have on display and that is when I found out that it was not the correct size! I was lucky to find a metric bolt size 12M-1.25! The installation was smooth after I had the correct size bolt! The packing of the hitch could have been better!
-- comment by: Frank N - 12/16/2015


I really like this receiver, it tucks up nice and high, and out of the way, and seems pretty stout. I have a 2011 4wd Frontier, so I like the ground clearance. You just get the right height hitch for whatever you’re towing.
I like my trailer and truck height even, I’m kind of Type ‘A’ about that stuff! I can’t stand a saggy trailer or Truck


Product was slightly bent and took 3 hrs to install.Curtis hitch and ball that goes with it is rusty and the pin jams when towing.

It sounds like that the side brackets were knocked out of alignment which is why the bolt holes are not lining up. This can happen while in transit to our facility or to you. We do have a great FAQ that provides ways to move the brackets back into alignment so the hitch can be installed. I recommend using a hitch ball grease like part # 58117
White Grease Hitch Ball Lube
to help protect the ball.
-- Etrailer Expert Jenny N - 09/22/2022


Installation on Nissan Frontier NP 300 (singe cab) 2020 in Aruba, Dutch Antilles, in the Caribbean Sea off the coast of Venezuela. Excellent and professional service


For the price you can't beat it. The only negitives are:
1) the washers that are included are just a bit to
small in center diameter. The bolts must be
screwed in before instalation.

2) one of the brackets was bent about 5
degrees inward, which made it impossible to
start the bolts. I ended up having to use c
clamps to pull it to the frame to start the


Easy to install and very sturdy !!! Definitely recommend this product.

2017 Nissan Frontier

Hilariously easy to install on my 2018 Frontier Pro-4x. I was even surprised at how easy the socket alignment was to get the torque wrench in there for final adjustment. Maybe 10 minutes total?

2013 Nissan Frontier

Ordered The Hitch Sunday evening and received Wed..The Hitch was a perfect fit installed in less than 20 min. I will be ordering wiring harness next. Great prices.

2012 Nissan Frontier

Curt Ball Mount for 2'' Hitches-C45030
T Connector Vehicle Wiring Harness w/ 4 pole flat trailer connector-C56225
Curt Trailer Hitch Receiver Class 3 2''-13241

Website easy to use. PayPal available (the main factor).
Fast shipping. Well packaged. All 3 items installed within minutes.
Amazing experience with etrailer!!
Will definitely return to do business.

We are more than pleased with your products and the transaction. Thanks again!
60 y - 10/27/2017

2012 Nissan Frontier

Be aware that etrailer's guidelines for review prevent me from explaining my rating. I could give you the good and the bad, but not if I follow the company's guidelines which are slanted to control what potential customers can learn about the company's service.


If you receive a hitch that is not bent(holes line up perfectly), you'll have a 5 star experience. Not in my case.

Somewhere along the line both the mounting arms were bent inward.. about 1 inch on one side and 3/4" on the other. I did not see damage to the insides of box...probably a warehouse/handling issue.
(etrailer should verify alignment before sending)

I have a workbench and what I thought would be a solid enough vise to bend things back in alignment... nope. I only have a 4" vise with a swivel base and that is not going to work. (swivel would give/rotate whole vise)

Turns out you'll need a beefy vise that does not swivel at the base(or quality vise that wont allow to swivel under "extreme" load) connected to a sturdy setup was not up to the task. --if you have a decent setup(6" non swiveling base, solid bench) or have access to one you should be fine.

In the end, after 3 weeks(i carried hitch in my suv in case I ran across something), I finally ran across a shipping container type box that had a 1/3" gap in between the cement and bottom of container.... slipped the bent arm in there, gave it some muscle and aligned it into place... once straight(verified with straight edge), it went on no issues. Some of the powder coat is scuffed/bare metal due to this manipulating so use soft jaws or towels/etc(durr) .

Next hitch I get will probably be from a brick and mortar location so they can deal with any alignment issues for me.
Dealing with etrailer as an online seller was great/straightforward and they price matched + %10 but I would rather pay a little more and just bolt it on w/o further hassle.

It sounds like you knew what you were doing to get your flexed hitch straightened back out. Ive linked a help article with further tips on correcting a flexed hitch. You mentioned that there are some bare spots on the hitch from the concrete. Its a good idea to cover those bare metal spots with some rust-inhibiting black spray paint to help prevent the metal from rusting.
-- Etrailer Expert Victoria B - 11/18/2019

2011 Nissan Frontier

I ordered my etrailer towing bar for my 2011 Nissan Frontier and got it 2 days later with a Federal holiday in there to boot. The instructions were simple and straightforward, online videos were instructive also. It is recommended to have a 2nd set of hands for the weight of it, but I did not and just used jack stands to support and align. All bolt holes lines up with my factory ones, easy peasy. Good support from company with followup email to make sure I had gotten product and was happy with it. Great product and company. Highly recommend them. Jon T.

Great! No problems
Jon T - 01/23/2018

2012 Nissan Frontier

I was able to install the hitch single handed with the aid of a floorjack. Everything matched up and the installation was finished in about 30 minutes. Sweet!

Now I can pull my trailer with worrying about damaging my bumper and get those projects done around the house and yard. Thanks for making this installation as smooth as possible with the tips from your website. Next time I need something for my truck or trailer, will be the first place I look!

Saturn Relay

Product received in good condition. Bolted right up with no problem. Most difficult part was managing the weight of the hitch and getting bolts started.
Wiring relay connections was a breeze to install. Most difficult part of this proceedure was the removal of the factory installed protective cap under the rear of the truck so the 4 prong wire plug could be plugged in. Over all installtion of everything took about an hour, but i took my time to be sure I got everything right.

Product has worked great and have had no problems with it. Very pleased with the hitch.
Richard S - 06/27/2014


Unbelievable prices, and even better is the customer service! Above and beyond assistance on shipping and pricing, as well as proper product selection. Best of the Best!!!

2016 Nissan Frontier

The hitch is a perfect fit for the 2016 Nissan Frontier and pretty easy to install.


You will need an assistant for sure, my 12 y/o was enough to assist me to start the bolts as I held the receiver in place. Perfect match. The receiver did have a few chips off of its paint from shipping but overall was happy with it

2012 Nissan Frontier

I never write reviews but this was such a great experience I thought I would say a few words. First, the delivery time was 1 day earlier than promised which was great. I wasn't too sure about the wiring and the available videos were incredibly helpful. Also, my truck is older and they had helpful videos on how to deal with the rusty weld bolts --- The product quality is also great. All around great experience!


great product easy to put on did myself.

great no problems
Steven - 11/06/2019

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Does the Curt Hitch part # 13241 Come with Installation Hardware
    All of the custom fit trailer hitches we carry, including the Curt Hitch part # 13241 that you referenced include all of the necessary installation hardware. I attached an install video that shows this hitch being installed with its included hardware for you to check out.
    view full answer...
  • Fitment of Curt Trailer Hitch on 2012 Nissan Frontier
    What kind of dimensions are you looking for? The Curt Trailer Hitch Receiver # 13241 is a custom-fit trailer hitch for your 2012 Nissan Frontier so it will definitely fit unless you have modifications to your vehicle. When installed the top inside of the receiver is 18-3/4" above the ground and the center of the hitch pin hole is behind the bumper by 3-1/4". You can see both of these measurements on the attached installation video.
    view full answer...
  • What Size Socket Is Used to Install Hardware for Curt Hitch for 2018 Nissan Frontier
    Yes, the install hardware for the Curt hitch part # 13241 that you referenced does requires a 19 mm socket. For more info on the install you can check out the install video I attached as well as the install instructions link.
    view full answer...
  • How to Pick Out Correct Ball Mount for 2016 Nissan Frontier Towing Travel Trailer
    I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will measure the coupler height from the ground to the bottom of the trailer coupler when the trailer is on level ground. Next, you will need to compute the difference. If the hitch height is...
    view full answer...
  • What are the Dimensions of the Curt 13241
    I had the Curt # 13241 measured and have said measurements listed below. Please keep in mind this is designed to fit a 2005 to 2021 Nissan Frontier and a 2009 to 2012 Suzuki Equator. (Red) Overall length of the hitch (end to end) - 45 7/8 inches (Pink) Overall length of the bracket that attaches to the frame - 11 3/4 inches (Orange) Distance from the first mounting hole (front of vehicle) to the furthest mounting hole - 7 1/8 inches (Yellow) Distance from the first mounting hole to the...
    view full answer...
    Image 1 for Image 2 for
  • What Mounting Bolts Attach to the Hitch of a 2022 Nissan Frontier?
    It truly depends on the hitch you purchase for your 2022 Nissan Frontier SV. For example, if you go with the Curt Hitch 2" # 13241, this hitch uses M12 x 1.25 bolts. It is important to note, however, that the bolts and all other hardware are included with all of our hitches for your vehicle. If you need a hitch recommendation, I recommend the # 13241 because it comes with a superior gloss outer coat over the base powder coat that provides you with superior protection against rust/corrosion...
    view full answer...
  • 2011 Nissan Frontier Hitch Comparisons
    For your 2011 Nissan Frontier the Draw-Tite # 75282 and the Curt # 13241 are both considered a compatible fit. All the hitches that you have listed are Class III hitches are are of a high quality and have the same ratings for gross towing weight and tongue weight. All have identical installation procedures, and there is no drilling required for installation on any of these hitches. When installed all of the hitch receivers will be approximately flush with the rear bumper of your truck....
    view full answer...
  • Size Bolts Used for the Curt Hitch part # 13241
    The Curt hitch part # 13241 that you referenced uses a total of 6 M12-1.25 x 35mm hex bolts and six 7/16 inch conical tooth washer. You would want to get grade 5 or higher bolts from your local hardware store. Since hitch hardware is considered one time use it's a good thing you didn't get the hardware with it. You can order the part # RHK and we will ship you out the correct hardware as well.
    view full answer...
  • Trailer Hitch Recommendation for 2017 Nissan Frontier Crew Cab 4x4 from Curt
    We have a Curt trailer hitch that is a fit for your 2017 Nissan Frontier but it's not the Curt hitch part # 13831. Instead you'd need the part # 13241 which is a confirmed fit and would work well.
    view full answer...
  • Trailer Hitch Recommendation for a 2015 Nissan Frontier
    I did some checking and for your 2015 Nissan Frontier the Curt hitch part # 13241 has been confirmed as a fit. The # C56225 has been confirmed as a fit as well for your vehicle.
    view full answer...
  • Trailer Hitch Receiver and Wiring Recommendation for 2014 Nissan Frontier 4 x 4 Crew Cab
    When it comes to a hitch for your 2014 Nissan Frontier 4 x 4 Crew Cab, I recommend going with the Curt Class III Trailer Hitch Receiver, # 13241. This hitch bolts directly to the frame of your Frontier and provides a towing capacity of 5,000 lbs and 500 lbs of tongue weight. I have attached an installation video for you. As for wiring, you will want to go with the T-One Vehicle Wiring Harness, # 118266. This harness provides the relays to activate the tow package along with the 7-way connector...
    view full answer...
  • Should Third Relay Be Installed With Trailer Wire Harness On 2015 Nissan Frontier
    The Wiring Harness with 4-Pole Flat Trailer Connector, part # C56225 we offer for your 2015 Frontier includes the 3 relays you mentioned are included with the Nissan wiring harness. Our installer use all three relays when they install the harness on the vehicles. Having the third relay installed will not affect the vehicle whether it is needed or not. I have attached a link to an installation video for this harness on a Frontier you can check out. I researched the wire harness you asked...
    view full answer...
  • Curt Trailer Hitch vs. etrailer Trailer Hitch for 2020 Nissan Frontier
    There is a slight difference between the etrailer Trailer Hitch Receiver # e98869 and Curt Trailer Hitch Receiver # 13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good at hiding any blemishes or scratches while the Curt has a glossy black finish. Apart from the finish, these two hitches are exactly the same, with the same capacities and installation. I have added a link to the installation instructions...
    view full answer...
    Image 1 for
  • Comparing the eTrailer Hitch E98869 and the Curt Hitch 13241 for a 2018 Nissan Frontier
    The Trailer Hitch Receiver part # E98869 and the Curt Trailer Hitch Receiver part # 13241 which are both a fit for your 2018 Nissan Frontier have the same shape/design/capacity but are not exactly the same. The difference between them is in regards to their finish. The eTrailer hitch has more of a matte finish whereas the Curt trailer hitch has more of a gloss finish. They both have the same durability. I have attached an install video for you as well as a few photos.
    view full answer...
    Image 1 for Image 2 for
  • Curt vs. etrailer Trailer Hitch For 2023 Nissan Frontier
    There is only one difference between the Curt and etrailer trailer hitches that fit your 2023 Nissan Frontier, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch. The hitches that fit your '23 Frontier are the following part numbers: - etrailer Trailer Hitch Receiver # e98869 - Curt Trailer Hitch Receiver # 13241 The matte black finish is nice as it hides the inevitable dings, scuffs and scratches better than the glossy finish, but if...
    view full answer...
  • Recommended Trailer Hitch for a 2015 Nissan Frontier
    I recommend the Curt Trailer Hitch # 13241 for your 2015 Nissan Frontier. I recommend this hitch because it is confirmed to fit your truck and we have test fitted this product on a 2015 Nissan Frontier. The maximum GTW for this hitch is 5,000 lbs. and the tongue weight capacity for this hitch is 500 lbs. However, you are limited by the GTW and TW of your truck which varies depending on what kind of 2015 Nissan Frontier you have. These weight capacities are listed in your owners manual for...
    view full answer...
  • Will The Curt Trailer Hitch Class III # 13241 Fit 2013 Nissan Frontier
    The Curt Trailer Hitch Class III # 13241 mentioned in your question is custom fit for your 2013 Nissan Frontier and will work great. This is a bolt-on installation that uses existing holes on your Nissan Frontier. No drilling or welding is required. All the necessary bolts and installation instructions are included in the hardware kit. I have provided a link to the instruction manual as well as a video of the installation if you want to take a closer look at the process. If you plan on...
    view full answer...
  • American Made Trailer Hitch Recommendation for 2007 Nissan Frontier
    For your 2007 Nissan Frontier we do have one American made trailer hitch. For that you would want the Curt hitch part # 13241 which I attached an install video for as well. For trailer wiring you then would want the part # C56225 which is also a confirmed fit. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a...
    view full answer...
  • Trailer Hitch Recommendation for a 2016 Nissan Frontier
    The Curt hitch part # 13241 that you referenced has been confirmed as a fit for your 2016 Nissan Frontier so I would recommend it for you. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball mount...
    view full answer...
  • Trailer Hitch Receiver Fit for 2009 Nissan Frontier
    Trailer hitch receivers are designed to work with specific years, makes, and models of vehicles because they install to the frame, and those are different depending on the vehicle you have. That means a hitch for a 2006 Chevy Colorado would not be able to fit your 2009 Nissan Frontier, though we do have hitches that you can add. The hitches that fit 2009 Nissan Frontier are: - Trailer Hitch Receiver # e98869 - Draw-Tite Max-Frame Trailer Hitch Receiver # 75282 - Curt Trailer...
    view full answer...
  • Are Holes Already There for Trailer Hitch Installation on 2019 Nissan Frontier
    Correct; the holes will already be there on your 2019 Nissan Frontier when installing any of the trailer hitches that fit this truck. If you take a look at the accompanying photo you can see where these holes are being pointed out by our installer. This photo is from the linked installation video, at about the 3:30 mark. This will be the same for each of the trailer hitches that fit your 2019 Nissan Frontier: - etrailer Trailer Hitch Receiver # e98869 - Curt Trailer Hitch Receiver #...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch For A 2023 Nissan Frontier
    When choosing the correct trailer hitch for your 2023 Nissan Frontier we do offer three different choices that are confirmed for your vehicle. All three hitches are very similar but out of the three I recommend The Draw-Tite Max-Frame Trailer Hitch Receiver # 75282 because it has a higher tongue weight capacity at 750 pounds when The Curt Hitch # 13241 and The etrailer hitch # e98869 sit at 500 pounds. Having a higher tongue weight will allow you to carry heavier hitch accessories like...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for a 2016 Nissan Frontier
    The highest capacity trailer hitch we offer for your 2016 Nissan Frontier is the Curt Hitch part # 13241 which is a Class III hitch that has a 5,000 lb total trailer weight and 500 lb tongue weight capacity. I attached an install video for you to check out as well. For trailer wiring you would then want the part # C56225 which I attached an install video for as well. For a mounting bracket you would then want the part # 18144. If you wanted to do some towing you might be interested in...
    view full answer...
  • What is the Diameter of the Hitch Pin Hole in the Curt Trailer Hitch Receiver # 13241
    The diameter of the hitch pin hole for the Curt # 13241 trailer hitch receiver is 5/8 of an inch. A Pin and Clip, like part # C21500, is designed to fit into the hitch pin hole. You can use part # e98882 for an option that locks.
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Bradley B
Test Fit:
Bradley B
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Mike H
Video Edited:
Mike H
Employee Chad S
Video Edited:
Chad S
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Andrew L
Video by:
Andrew L
Employee Kathleen M
Video by:
Kathleen M
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.