Can wiring harness for trailer lights be installed on 2024 Ford Bronco?

Question

Question:

Is there trailer light wiring for a 2024 Ford Bronco ? thanks. trailer has 4 way plug and I want lights to work. no brakes.

asked by: David K

0

Expert Reply:

Yes! You can install the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C87BR if your 2024 Bronco does not have LED tail lights. If it DOES have LED tail lights then you'll instead need Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C42WR.

Each of these kits include everything you'll need for the installation and use. I attached an installation video, but basically you'll connect the converter's black wire to battery positive, the white wire to vehicle ground, and the other wires tap into your vehicle's taillight wiring.

expert reply by: Andrew N

0

Dennis

3/30/2024

After installation does dealer have to program?

Answer 1

Yes, it does. The Curt Hitch 13493 or our part number item #C76WR is confirmed to fit the 2024 Ford Bronco. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500…

view full answer...

Answer 2

Hey Travis! The Draw-Tite Max-Frame Trailer Hitch #DT37GR is engineered to be stronger than the OEM hitch you're referencing. However, that does not mean it increases the towing/tongue weight capacity of the vehicle. Many hitches are…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Can wiring harness for trailer lights be installed on 2024 Ford Bronco?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching