Does the Curt Hitch 13493 Fit a 2024 Ford Bronco?
Updated 05/07/2024 | Published 11/07/2023
Products Featured in This Question
Question:
Does the Curt PN 13493 fit the 2024 Broncos? I see it fits the 2023.
asked by: Christopher
Expert Reply:
Yes, it does. The Curt Hitch 13493 or our part number item # C76WR is confirmed to fit the 2024 Ford Bronco. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and 350 lbs maximum tongue weight.
I really like this hitch because of how easy it is to install it. You only have to install four bolts to your rear bumper to get this hitch set up. I have linked an installation video below along with the instructions so you can see how easy it is.
If you are planning on towing you will also need a wiring harness item # C42WR for LED lights or item # C87BR for incandescent lights and a ball mount kit item # C45534.
I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- No Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Shop: Trailer Hitch
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Q&A: Can wiring harness for trailer lights be installed on 2024 Ford Bronco?
- Video: Installing the Draw-Tite Max-Frame Trailer Hitch Receiver on a 2024 Ford Bronco
- Video: Curt T-Connector Vehicle Wiring Harness DIY Installation - 2024 Ford Bronco
- Video: Breaking Down the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-C87BR
- Video: Installing the Curt Trailer Hitch Receiver on a 2024 Ford Bronco
- Search Results: trailer hitch
- Video: Review of Power Mountain Automotive Tools - Jacks and Jack Stands - PM34FR
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Search Results: trailer wiring bracket
- Search Results: hitch anti~rattle
- Search Results: accessories and parts
- Search Results: plugs into vehicle wiring flat tow wiring harness
- Search Results: custom fit vehicle wiring
- Q&A: Will Curt Trailer Hitch Receiver Fit 2023 Ford Big Bend Bronco
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: The Best 2024 Ford Bronco Trailer Hitch Options
- Video: Comprehensive Review: B and W Pintle Hook Mounting Plate for 2" Hitches
- Q&A: Recommended Hitch for a 2023 Ford Bronco
- Q&A: How to Install Curt Trailer Hitch on 2024 Ford Bronco
- Q&A: How to Mount 7- and 4-Pole Trailer Connector on 2024 Ford Bronco
- Q&A: Recommended 7 Pin Connector For A 2021 Ford Bronco
Lbinwnc
5/6/2024
Jerred There are reports in the forums that in MY24 there is now a plate holding a wiring harness over some of the bolt holes and that the bumper needs to be removed to install the hitch. Have you a new video with a MY24 ?