Will The Curt C69VV Fit A 2024 Subaru Outback Wagon Touring Model?

Question

Question:

We have 2024 outback touring , will this hitch work touring, its body is different than regular outback

asked by: Jane L

0

Expert Reply:

Yes, the Curt class 3 hitch # C69VV will indeed fit your 2024 Subaru Outback Wagon Touring model. According to the manufacturer this will fit all models of the 2024 Outback Wagon. Keep in mind that installation will require trimming/modification of the heat shield.

expert reply by: Jesse M

0

Answer 1

There is very little difference in bumper clearances between the Draw-Tite Trailer Hitch Receiver #76227 and Curt Trailer Hitch Receiver #C13410 that fit your 2015 Subaru Outback. You aren't going to hit a knee on either, as the face of the hitch…

view full answer...

Answer 2

Hi Peter! great question. Just so you know, there aren’t any aftermarket hitches for the 2024 Subaru Outback Wagon that actually go through the bumper you'd have to go with a factory (OEM) hitch if you want that. For the best ground clearance…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver #C69VV does fit the 2024 Subaru Outback Wilderness. Ground clearance will be further reduced at the rear compared to other hitches for the Outback since it has a visible cross tube. Bumper removal is not required, but…

view full answer...

Answer 4

The Class III hitches are measured by having a 2 inch hitch receiver and weight ratings between 3,500 lbs and 8,000 lbs, which is what both of the Curt hitches for your 2024 Subaru Outback are, the visible crosstube Curt Trailer Hitch Receiver #C69VV…

view full answer...

Answer 5

Yes, the Curt Trailer Hitch Reciever #C69VV has been confirmed to fit your 2024 Subaru Outback. This receiver requires no drilling or welding onto your frame for a simple bolt on installation. You will have to drill an hole or 2 in the muffler heat…

view full answer...

Answer 6

Hey Dennis, thanks for reaching out! We have yet to install the Towsmart Trailer Hitch Receiver #TS34ZR, but it has a similar design to the Curt #C69VV, which we had a chance to install on a 2024 Outback Wagon. This will be the same as your 2025…

view full answer...

Answer 7

Nope, there is no cutting or trimming of the bumper fascia whatsoever on your 2024 Subaru Outback when installing the Curt Trailer Hitch Receiver #C69VV. There is also no drilling into the frame of your Outback either, which I only mention because it…

view full answer...

Answer 8

Yes, the upright mast of the Swagman XTC2 part #S64670 that you referenced does fold down. Shipping is not included.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Will The Curt C69VV Fit A 2024 Subaru Outback Wagon Touring Model?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching