Is It Required to Run Power Wire for Curt T-Connector Vehicle Wiring Harness on 2019 Dodge Durango

Question

Question:

do I really need to run a wire to the battery for trailer lights? Or will it work without? 2019 durango rt

asked by: Rilry

0

Expert Reply:

It is required to run a power wire from the Curt T-Connector Vehicle Wiring Harness part # C56336 to the battery on a 2019 Dodge Durango. The power wire is actually what provides power to the lights on the trailer. The tee connectors simply obtain the signal. The vehicle's factory tail light circuits are not rated for the extra power needed for trailer tail lights so you'll need to pull power from the battery for these. It's really not that big of a deal to run the power wire, just follow the brake lines and you're pretty much there.

I have attached a help article with some more tips for routing the power wire as well.

expert reply by: Conner L

0

Answer 1

When installing the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56406 on a 2019 Jeep Cherokee you will need to route the power wire to the battery of your Jeep. That is how the converter gets power, as opposed to the…

view full answer...

Answer 2

The Curt T-Connector Vehicle Wiring Harness #C56336 that you referenced is designed for your 2018 Dodge Durango if it did not come with the factory tow package, but it can certainly still be installed and used on your Durango if it does have the…

view full answer...

Answer 3

Great question Fred. I recommend to use the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat part #118617 for the 2018 Dodge Durango without a factory wiring package. The Tekonsha can handle over 1 more amp per circuit of power compared to the…

view full answer...

Answer 4

Yes, the Curt T-Connector #C56336 that you referenced is exactly what you want for your 2018 Dodge Durango without the tow package. If you don't already have a trailer hitch then I recommend going with the Curt Class III #C13182 which is easy to…

view full answer...

Answer 5

You are looking for the Draw-Tite Hitch item #DT38MR. This hitch mounts behind the rear bumper cover and is completely concealable. This hitch is custom fit and bolts to the 2018 Dodge Durango with included hardware. I have linked an installation…

view full answer...

Answer 6

The most hidden trailer hitch available for your 2020 Dodge Durango is without a doubt the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR. The 2" receiver for this Class III hitch will actually extend out through the bottom of the rear…

view full answer...

Answer 7

Hey Steven, thanks for reaching out! You're going to want the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR for your 2020 Dodge Durango because it sits right behind that cover you're talking about and still allows you to replace the…

view full answer...

Answer 8

Hello Joe, thanks for reaching out. Any aftermarket hitch you add to your 2025 Toyota RAV4 XSE is going to potentially interfere with the lift gate sensor. In some cases, the sensor will still work if you wave your foot on either side of the…

view full answer...

Answer 9

Starting with the trailer hitch I recommend the Draw-Tite Class III Max Frame Receiver Hitch #DT38MR because of its hidden design. This is the only hitch available for your 2018 Dodge Durango that will actually sit behind the rear bumper fascia panel…

view full answer...

Answer 10

To install the Redarc Tow-Pro Liberty Brake Controller #RED24FR on your 2024 Dodge Durango you simply need the Plug and Play Wiring Harness #RED77FR. This will allow you to easily plug all the components together so you are ready to tow your trailer…

view full answer...

Answer 11

Yes, there is but you'll need an additional part. You will need the Curt item #C56336 4-way you referenced but you'll also want the Universal Installation Kit for Trailer Brake Controller item #ETBC7. The kit includes a pre-wired 7- and 4-way…

view full answer...

Answer 12

It sure will! The Curt T-Connector Vehicle Wiring Harness #C56336 you were looking at is compatible with your 2021 Dodge Durango with LED tail lights. I included a video of the #C56336 being installed for you to take a look at.

view full answer...