Flat Tow Parts Compatible For 2021 Jeep Wrangler Rubicon Diesel With Factory Steel Warn Winch Bumper

Published 01/27/2022

Products Featured in This Question

etrailer Invisible Base Plate Kit - Removable Arms

(739)

$479.80

Replacement Quick Disconnect Crossbar Assembly for Roadmaster Tow Bars

(318)

$133.90

Blue Ox Patriot Portable Flat Tow Brake System - Proportional

(475)

$1656.62

Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 10K GTW, 400 lbs TW

(1603)

$196.50

Roadmaster Battery Charge Line Kit for Towed Vehicles

(1324)

$43.45

Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights - Non-Binding - RV Mount - 8,000 lbs

(825)

$1545.00

Roadmaster Accessory Kit for Nighthawk and Sterling Tow Bars - Tail Light Wiring - Lock Set

(27)

$219.06

12 Volt Outlet Kit, 20 amps

(365)

$37.92

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3493)

$575.00

Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights

(333)

$143.27

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

(2166)

$575.00

Question:

will the e98948 and the BRK 2019 work with the diesel engine? this is a brand-new unit with a 2-inch rise kit. Thanks. Help

asked by: Larry M

Helpful Expert Reply:

For your 2021 Jeep Wrangler Unlimited Rubicon 4x4 with the diesel engine, factory steel bumper and warn winch the Roadmaster Crossbar-Style Base Plate Kit # RM84VR and Roadmaster Direct-Connect Base Plate Kit # RM24VR are the only baseplates that are confirmed to fit. If you already have a set of tow bars you are using let me know and I will find you the correct adapter, otherwise the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 is the one I recommend. This will work directly with the Direct-Connect base plate or you will need a Quick Disconnect Crossbar Assembly # 910021-00 to use with the Crossbar-Style base plate.

The etrailer Invisible Base Plate Kit # e98948 will only work on models with the plastic front bumper.

The Blue Ox Patriot # BLU37TR will work with your Rubicon. You will need to add a 12 Volt Outlet Kit # RM-9332 and Battery Charge Line Kit # RM-156-25. The outlet is needed since your current outlet loses power after the ignition is switched off and the charge line will help ensure the braking system does not completely drain your battery.

If your Rubicon has the ParkSense proximity sensors you will the Roadmaster Wiring Kit with Smart Diodes # RM47ZR, otherwise the wiring in the RoadMaster Nighthawk All Terrain Towing Combo Kit # RM-9284-2 will work to control your lights.

Finally you may need a High-Low Adapter like # RM-048-4 to level your tow bars. Since your Jeep is lifted it is best to install the base plate kit and measure the height of the connections. You want the tow bars to be within 3" of level from the motorhome to the Jeep. Once you have both measurements I can help you find the correct adapter if you need.