Will Thule T2 Pro XTR 2 Bike Rack TH23VJ Fit A 2019 Toyota Prius Prime W/ Curt Trailer Hitch C11473?

Question

Question:

Hello. When installed in a 2019 Prius Prime does the hitch extended out far enough for the installation of the Thule T2 Pro XT 2 bike rack? Thank you.

asked by: Richard L

0

Expert Reply:

I have a different bike rack option for you, but the Curt Trailer Hitch Receiver # C11473 you were looking at and all of the available trailer hitch receivers for your 2019 Toyota Prius Prime will measure right at 7" from the center of the hitch pin hole to the most outward edge of the rear bumper.

Your Thule T2 Pro XTR Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount # TH23JV also measures 7" from the center of the hitch pin hole to the closest edge of the rack, so the bike rack will rub up against your bumper.

Instead I recommend going with a bike rack that has a longer shank to avoid clearance issues. I recommend the Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount # S64683 which measures 12" from the center of the hitch pin hole to the closest edge of the rack giving you plenty of clearance. This rack can accommodate two bikes weighing up to 45lbs each.

I included a video of the # S64683 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The Kuat Sherpa 2.0, part #SH22G, and the Saris SuperClamp EX 2, part #SA4025F, are both wheel-mounted bike racks. However, the more robust design of the SuperClamp's wheel cradles (front and rear) along with their straps WILL allow the rack to…

view full answer...

Answer 2

For a Class I hitch like yours we do not recommend the use of hitch adapters since they cut the capacity of the hitch they are installed on by 50 percent and add quite a bit of movement. Instead we'd recommend a bike rack like the Thule Camber…

view full answer...

Answer 3

As long as the weight of the bike doesn't exceed the capacity of the bike rack and the combined weight of the rack and bike doesn't exceed the tongue weight capacity of the hitch, and the rack you use is compatible with a Class I hitch, you…

view full answer...

Answer 4

The Saris SuperClamp EX, part #SA4025F, is compatible with e-bikes with fenders. To do this, you will need to mount the front hook right where the fender ends. You'll also need to place the rear hook over the rear fender while not fully placing…

view full answer...

Answer 5

According to my contact at Saris, that is correct. Since it also uses front and rear wheel straps, as long as you can get the front wheel clamped down really well you can just do the best you can with the rear hook and it will be good to go. The…

view full answer...

Answer 6

Although the Saris SuperClamp EX can accommodate e-bikes with fenders, it uses a top hook that would need to be clamped over the front and rear tires, just where the fender ends. In addition to that, it also uses wheel straps that hold on to the…

view full answer...

Answer 7

Let's first start with the hitch for your 2017 Toyota Prius Prime. For that the best option is the Draw Tite part #24966 for two reasons. One being that it doesn't require a stabilizer strap when carrying a bike rack like the Curt does and…

view full answer...

Answer 8

Yes, the Draw Tite part #24966 is the best hitch for the 2017 Toyota Prius Prime for carrying a bike rack since it has best clearance and doesn't require the strap like Curt does. I attached a link to the install instructions for you to check out…

view full answer...

Answer 9

You do not need to use the Curt Cam Buckle Stabilizing Strap #18050 with the Curt Trailer Hitch Receiver #C11473 that fits your 2017 Toyota Prius. Curt did previously require the use of the strap with accessories like bike racks to maintain the…

view full answer...

Answer 10

Yes, the two will indeed work together on your 2020 Toyota Prius Prime. The Curt hitch will measure approximately 7 inches from the hitch pin hole to the bumper, and the SuperClamp measures 8-1/4 inches from the hitch pin hole to the closest part of…

view full answer...

Answer 11

Though we haven't had a chance to install the Curt Trailer Hitch #C11473 on a 2017 Toyota Prius Prime, based on my research it will sit at about the same spot as the Draw-Tite Trailer Hitch #24966 on your Prius, which is approximately 7"…

view full answer...

Answer 12

The Curt Trailer Hitch Receiver #C11473 is confirmed to fit your 2021 Toyota Prius Prime. I spoke with Curt and they verified that this hitch will fit the Prius Prime. They said to make sure the tabs on the end of the bumper beam assembly are…

view full answer...