Could Saris SuperClamp EX Carry E-Bikes with Fenders

Question

Question:

We have two rad rover fat tire ebikes , both with front and rear fenders . Will the Saris super clamp ex2 bike platform bike rack work with fenders ? Thank you.

asked by: Timmo R

0

Expert Reply:

The Saris SuperClamp EX # SA4025F transports bikes with dual wheel-clamping hooks. With full fenders on front and rear wheels being commonplace on eBikes, the placement of the SuperClamp hooks need to be adjusted accordingly, but they will certainly work with together.

When a fender is used on the front and/or rear wheel, clamp the hook to the wheel where the fender ends. We also strongly recommend the use of the included front and rear wheel straps, especially when transporting bikes with fenders. This will let you transport your bikes safely and securely.

expert reply by: Jameson C

0

Answer 1

The Kuat Sherpa 2.0, part #SH22G, and the Saris SuperClamp EX 2, part #SA4025F, are both wheel-mounted bike racks. However, the more robust design of the SuperClamp's wheel cradles (front and rear) along with their straps WILL allow the rack to…

view full answer...

Answer 2

Though we haven't had a chance to install the Curt Trailer Hitch #C11473 on a 2017 Toyota Prius Prime, based on my research it will sit at about the same spot as the Draw-Tite Trailer Hitch #24966 on your Prius, which is approximately 7"…

view full answer...

Answer 3

I attached an install video for the Draw Tite hitch part #24966 on a similar Toyota Prius Prime to your 2021 model for you to check out. The process would be the exact same.

view full answer...

Answer 4

Although the Saris SuperClamp EX can accommodate e-bikes with fenders, it uses a top hook that would need to be clamped over the front and rear tires, just where the fender ends. In addition to that, it also uses wheel straps that hold on to the…

view full answer...

Answer 5

Let's first start with the hitch for your 2017 Toyota Prius Prime. For that the best option is the Draw Tite part #24966 for two reasons. One being that it doesn't require a stabilizer strap when carrying a bike rack like the Curt does and…

view full answer...

Answer 6

I have a different bike rack option for you, but the Curt Trailer Hitch Receiver #C11473 you were looking at and all of the available trailer hitch receivers for your 2019 Toyota Prius Prime will measure right at 7" from the center of the hitch…

view full answer...

Answer 7

Yes, the two will indeed work together on your 2020 Toyota Prius Prime. The Curt hitch will measure approximately 7 inches from the hitch pin hole to the bumper, and the SuperClamp measures 8-1/4 inches from the hitch pin hole to the closest part of…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver #C11473 is confirmed to fit your 2021 Toyota Prius Prime. I spoke with Curt and they verified that this hitch will fit the Prius Prime. They said to make sure the tabs on the end of the bumper beam assembly are…

view full answer...

Answer 9

For a Class I hitch like yours we do not recommend the use of hitch adapters since they cut the capacity of the hitch they are installed on by 50 percent and add quite a bit of movement. Instead we'd recommend a bike rack like the Thule Camber…

view full answer...

Answer 10

According to my contact at Saris, that is correct. Since it also uses front and rear wheel straps, as long as you can get the front wheel clamped down really well you can just do the best you can with the rear hook and it will be good to go. The…

view full answer...

Answer 11

Yes, the Draw Tite part #24966 is the best hitch for the 2017 Toyota Prius Prime for carrying a bike rack since it has best clearance and doesn't require the strap like Curt does. I attached a link to the install instructions for you to check out…

view full answer...

Answer 12

The Curt hitch part #C11473 that fits your 2022 Toyota Prius Prime has a distance of 3 inches from the center of it's hitch pin hole out to furthest point out on rear bumper.

view full answer...

Could Saris SuperClamp EX Carry E-Bikes with Fenders

Continue Researching