Replacement Landing Gear 2006 Keystone Sprinter
Updated 07/21/2025 | Published 03/22/2021
Products Featured in This Question
Question:
looking to replace the landing gear legs. trailer is 2006 keystone sprinter copper canyon. there is no sky or other markings on the legs. the distance from the bottom of the upper bracket the top of the lower bracket is 11 inches. the length of the outer tube is 29-30 inches. I would like to replace both legs and the crossbar.
asked by: William B
Expert Reply:
For your 29-30 inches measurement, please look at the Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2", # LG-179013 and its counter part the Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2", # LG-179014.
I suggest the Cross Shaft Extension Tube for Bulldog Tandem Landing Gear - 72-3/4" Long - Fixed # BDCS730300.
You state that the bracket is at 11", if so you may need to remove adjust location and reweld.
Please note the attached video links for product review and installation.
Product Page this Question was Asked From
Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Driver Leg
- Stromberg Carlson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Breaking Down the Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear
- Video: In-Depth Review of the Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear
- Search Results: camper jacks
- Search Results: gear box
- Shop: Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Shop: Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear
- Video: Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear Spec Review
- Shop: Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies
- Shop: Replacement 5th Wheel RV Landing Gear Follow Leg w/ Snap Pin for RVs
- Shop: Lippert Electric Landing Gear w/ Handle - Outside Mount - 34-3/4" Lift - 5,000-lbs
- Shop: Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs
- Search Results: lc142178
- Shop: Replacement Follow Leg for Venture 5th Wheel RV Landing Gear - 33-1/2 Extended Length
- Q&A: Can Reese RV Landing Gear Jack 500708 Fit 2012 Stealth 5th Wheel
- Video: Review of MORryde Camper Jacks - I-Beam Mounted Stabilizer - MR96RV
- Article: Best Landing Gear
- Video: Feature Review Replacement Follow Leg for Stromberg Carlson Landing Gear
- Video: Comprehensive Review: Replacement Gearbox for etrailer and Ram 5th Wheel Landing Gear
- Q&A: Recommended Replacement Electric Jack for Atwood 10,000 lb Landing Gear
- Q&A: Replacement Landing Gear for 1998 Carriage Carri-Lite RK 732
- Video: Let’s Check Out the Stromberg Carlson Manual Landing Gear Set
- Q&A: Replacement Landing Gear Leg for a 2016 Keystone Montana High Country
- Q&A: Replacement Legs for Keystone Copper Canyon 5th Wheel Landing Gear
- Q&A: How to Find the Correct Replacement Lead Leg for 5th Wheel Landing Gear
- Q&A: Looking for Replacement Landing Gear Lead Leg for 2023 KZ Durango
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: How to Choose the Right Trailer Hitch Class
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
on Accessories and Parts
Mary H.
3/28/2025
Hi, I believe I need the same products as listed above, however, there are some listed on the site that come with both Drop Legs and the cross bar. What is the difference, if any. Thank you