Wheel Net Recommendation for a Polaris RZR with 27x9R-14 Front Tires and 27x11R-14 Rear Tires

Question

Question:

I have a 2012 RZR XP. It has 27-9R-14 in the front and 27-11R-14 in rear for tires. I have put the E-TRACK system on my trailer. I want to know if there is a tire strap that would work.

asked by: Dan B

0

Expert Reply:

For your tires, I recommend going with the Erickson Wheel Net, # 77314. This wheel net will accommodate your front and rear tires and they will have more than enough capacity to hold your RZR to the E-track system on your trailer.

Another items that we've found very helpful when loading ATVs and UTVs is the Erickson E-Chock, # EM09162-2. I typically try to park the UTV in the same spot over the axles to make sure I have the correct weight distribution on the trailer and these chocks make sure I park it in the same spot every time without thinking.

I've attached a few review videos of these products for you to check out.

expert reply by: John H

0

Answer 1

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 2

Hey Patrick! I don't have any black ones that mount on a trailer. What I do have are the Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel item #EM09162-2. These measure 8-1/2" long x 6-3/8" wide x 4-1/2" tall and…

view full answer...

Answer 3

The standard RV roof vent size is 14 inch by 14 inch like the #MA00-04301M. There isn't a 10 inch by 10 inch roof vent.

view full answer...

Answer 4

To add a hitch to your 2021 Grand Design Momentum 25G toy hauler you are going to want the Adjustable Width Trailer Hitch Receiver item #C13702. This frame mounted hitch can be bolted or welded on and will fit as long as your frame isn't wider…

view full answer...

Answer 5

Hi Aaron! I believe what you are looking for is included with the Reese Pro Round Bar Replacement Bracket & Frame Hardware Kit - Qty 1 #RP25FR. Unfortunately, that keeper tab piece (called a spring bar cover in the instructions) isn't sold…

view full answer...

Answer 6

I really wish there was an easy answer as to a safe track spacing with the Erickson E-Tracks #EM59150 to accommodate most vehicles, but the truth is that there are just too many possible widths to comfortably answer this without actually figuring out…

view full answer...

Answer 7

There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500…

view full answer...

Answer 8

The horizontal distance between the hitch pin hole and the tallest point of the Shocker Hitch Impact Max Cushioned Ball Mount #SHK34RR is 4-1/2" to the first hitch pin hole and 5-1/2" to the second hitch pin hole (see attached). I also got…

view full answer...

Answer 9

Ideally the Erickson E-Track Wheel Tie-Down Strap #EM58523 would be used on vehicles that the wheels line up centered on the E-tracks. However, there should still be a way to attach to wheels that are a little too narrow or wide. If they are too…

view full answer...

Wheel Net Recommendation for a Polaris RZR with 27x9R-14 Front Tires and 27x11R-14 Rear Tires

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching