Optronics Trailer Lights
- STL56RB
- Tail Lights
- Rectangle
- LED Light
- Red
- 6L x 3-1/2W Inch
- Brake/Tail/Turn
- Marker
- Submersible Lights
- Surface Mount
- Optronics
6-1/16" x 3-5/8" Rectangle. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Mounts on surface of trailer - hardware included. 3-Wire pigtail. 18 LEDs.
Features:
- Rectangular trailer tail light serves 6 functions
- Stop light
- Tail light
- Turn signal light
- Side marker light
- Side reflex reflector
- Rear reflex reflector
- Sealed, waterproof construction is submersible
- Light is designed specifically for boat trailers
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate housing
- Red acrylic lens over white LEDs
- Mounts on surface of trailer - hardware included
- Stainless steel hardware slides along rear channels so that you can adjust the position of the light
- 3-Wire pigtail
- DOT compliant
- P2 rated
Specs:
- Configuration: passenger's side (right-hand side)
- Driver's-side light (STL57RB) sold separately
- Dimensions: 6-1/16" long x 3-5/8" tall x 2-1/4" deep
- Distance between mounting slots (center to center): 2"
- Hardware size: 1/4-20 x 1" long
- Diodes: 18
- Power draw at 12.8 volts:
- Stop/turn signal light: 0.268 amps
- Side marker light: 0.059 amps
- Lifetime warranty on LEDs
![Optronics STL56 Series LED Combination Tail Light Diagram]()
Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
P2-Rated or P3-Rated Lights
![Diagram of light spread for P2 rated light]()
A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
STL56RB Optronics Combination LED Boat Trailer Taillight - 18 Diodes - Red Lens - Right Side
Alternate part number: STL-56RB
Compare to Wesbar 271584-01
WARNING: This product contains chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.