Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the replacement bearing race 00:00:02 for the L68149 bearing. Now this race will provide the smooth surface for your bearing to roll on inside of your trailer hub. Typically if you have to get new bearings it is a good idea to also replace the races when you do that. The races do need to be pressed into the trailer hub. This is the replacement part, will use the industry standard number. On this race it's stamped on there, L68110.
Again the matching bearing that goes in here is a L68149 which we do sell separately on our website. I happened to pull one of those just to show you, here's the bearing. You can see how it drops right into the race. They use that just like that. Now the main measurement on the bearing race is the outer diameter which is measured edge to edge just like that. What I'm going to try to do here is give you ....
Because the measurement is in thousandths of an inch we're going to use a digital caliper readout that'll show you how that measures. If we get there on there, tighten it up, and I'm going to zoom in just a little bit. You can see outer diameter on this is 2.327 inches. That should do it for the review of the replacement bearing race for the L68149 bearing.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
Trailer bearings fit perfectly and got me back on the road with my boat.
Excellent product description allowed me to find these bearings on etrailer’s website
Fit perfectly. I am very happy with the full service you offer including the fast shipping and the order tracking.
Perfect match bearing races. These measure exactly at 2.327 as they should. Also great prices, always in stock AND super FAST SHIPPING.
Perfect for my boat trailer! Super fast shipping! Thanks!!
just what I needed to repair my trailer bearings, and it fit like a glove. Installation was simple and easy, and everything is working great.
Delivery was timely, and most important, correct!
Your product, attentiveness/responsiveness met my expectation.
Job well done!
It fit the hub easily and will probably work well. L68111 that came with the kit I purchased a few years back didn't fit, so I needed this one. I only had the bearing number when I ordered the kit. It still shows the same kit with the same race number as available solution. Live and learn.
Have not yet installed the parts in my boat trailer. I was very pleased with Pat and Rose who handled my orders. I do no net know how my returns were resolved.
Fast shipping and will deal with again Thanks
Everything I needed was easy to identify and order through the etrailer.com site, and the order arrived quickly. The information and how-to videos were very helpful, and assisted me in getting my project completed easily.
I wouldn't hesitate to use the site again, or to recommend to anyone needing parts for their trailer.
I'm overhauling a 20 year old boat trailer and have found just about everything I need at etrailer.com. They did have a problem locating a master cylinder cap for me, but customer service informed me the manufacturer had discontinued the item. Overall, etrailer.com meets or exceeds my expectations. Trying to find all of these parts locally might be possible, but would require more time and gas than I'm willing to provide. Good company and good customer service!
I definitely can't find these all of these parts at the local
Everything was right on time, great sales people. All the bearings, seals, and races fit nicely.
Jerry S.
3/24/2018
Great
No problems at all after replacing the bearings and races on my boat trailer.
Richard B.
4/29/2019
Still working fine, low maintenance.
I got the email notification that the package was delivered before I went to the mailbox.This digital age is amazing. And the delivery was a day ahead of promised.
I haven't installed them yet but I would like to complement
etrailer on the tech support. I have a 19 year old Tracker trailer. Every few years I replace bearings and always have a problem with finding correct parts, It seems the L68149 inner bearing uses 2 different races that are different in size. To make matters worse the existing inner race was not marked with the correct part number. L68111 instead of the correct L68110. I measured bearing sizes several times and was still not certain what was wrong. While chasing down what to order I found the answer in the etrailer FAQ page. Having the exact measurements for the parts really helped. I also found the perfect replacement for the damaged rubber part on the transom saver for the boat. Now when it warms up a few degrees I can get these installed and be ready to go fishing. Thanks, etrailer.
I purchased a bunch of bearings, lights brake parts and electrical parts for a complete rebuild of a tandem axle flatbed a year or so ago. I installed the parts...then completely forgot about them. They are still working great. I hitch it up, use it and put it back...the trailer just plain works. I will purchase from etrailer again, no question about it. Tim
Want to help out the next customer looking for the bearing, cups, and seals for 2000-01 tracker trailstar trailer. 1st you have to dismantle one of the hubs and see what trailstar decided to put in there the day they built it. You will find the rear cups and seals are considered "Special for some reason". Not a problem for etrailer, they have them in stock and the quality is excellent and are exact replacements. The parts I had to order were cup L68110, cup L44610, seal 168233, bearing L68149 and bearing L44649. Oh yeah, customer service should get a 10 star review. I had an issue with shipping co. because of new driver in my area. Etrailer got all up in their business for me and I didn't have to do anything. Customer service also called me the next day to see if everything was delivered and satisfactory. We need more companys like etrailer.com . Excellent!!
Works as described. Wheel hubs are cool to the touch on the boat trailer after one year.
It was a pleasure ordering from trailer I got exactly what I ordered. I was able to track my product all the way to the delivery. The product fit perfectly. I will order from etrailer in the future for these kind of parts.
Great Product and well priced
Races and seals were delivered. I was surprised that the races came with surface rust. After a few minutes of lightly sanding them, the rust was removed. Not what I expected.
Shipped the parts fast and exactly what race I needed
Hoping USA made but made in China. At least the bearing I ordered was USA made Timpken.
Good fit, hard to find part. Old school 3700 lbs Dexter/UFP HUB
Good fit for a Titan brake drum
I had a lot of trouble getting these races. Others kept substituting for a different part number. saying the specs were close enough, not. I'm happy that you understand that when a customer requests a part, you supply the exact part requested. Thanks and "Great JOB to all"!
Gwendolyn Y.
4/11/2025
We will never settle for anything less than a perfect fit :)
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark
4/27/2019
Still working very well