Replacement Race # L68110 Availability and Compatibility with the # L68149 Bearing
Updated 04/25/2011 | Published 04/23/2011
Products Featured in This Question
Question:
Everything I read indicates that L68111 race is a compatible replacement to L68110. However, a simple measurement shows the difference in size and the L68111 that I received will not fit into my hub. Is there L68110 no longer in production? Why would do they believe these two are compatible when they are different sizes? Thanks.
asked by: Chad
Expert Reply:
The information I have indicates that the # L68149 bearing is compatible with a # L68110 race. The L68110 race is most commonly used in boat trailers and the # L68111 is most commonly used in land based trailers.
They both take the same bearing, # L68149, but use different seals and the installation surface on the hubs are different dimensions, as you have noted.
Most commonly the # L68110 race is associated with the # 168233 grease seal and the # L68111 race is most commonly associated with the 10-19 grease seal, # RG06-050, or the # 58846 grease seal.
This most likely explains the mis-information out there, and there are some custom applications that makes the mis-information seem more credible, so your best bet is to use a dial caliper and make sure the parts you purchase match the dimensions on your original parts.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - L68149 - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.38 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Grease Seal - Double Lip - I.D. 1.688" / O.D. 2.332" - Older UFP Hubs/Marine Axles - Qty 1
- Shop: Replacement Race L68110 for Bearing L68149 - Qty 1
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Shop: CE Smith Trailer Axle Beam with Studded Hubs - 5 on 4-1/2" - 54" Long - 1.8K
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles
- Q&A: How to Identify Needed Replacement Hubs for Adams Manufacturing Drift Boat Trailer
- Q&A: What is the Difference Between Trailer Hub Race L68110 and L68111
- Q&A: Should Prodigy P2 Brake Controller Show Two Dots on the Display When Not Connected to Trailer
- Video: Trailer Axle with Idler Hubs Spec Review
- Video: Review of CE Smith Trailer Axles - Trailer Axle Beam with Studded Hubs - CES84XR
- Search Results: trailer axles
- Search Results: trailer bearings races seals caps
- Video: Checking Out the Trailer Hub Wheel Stud, Screw-In, 9/16" x 3"
- Search Results: l68149 bearing kit
- Search Results: 1 2 x 20 wheel studs
- Search Results: 1/2 wheel studs
- Video: Ultimate Overview of the Timken L68110 Replacement Race
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: l68110
- Search Results: ufp db42
- Shop: Bumpers
- Q&A: Bearing Kits For Lippert 3,500LB Trailer Axles
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: Correct Grease Seal for Boat Trailer
- Q&A: Which Grease Seal Is Used With Bearing L68149 and Race L68110?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
on Trailer Bearings Races Seals Caps
