Replacement Bearings And Seals For 1-3/8 Inch Trailer Axle Spindle
Published 10/28/2016
Products Featured in This Question
Question:
Need a spindle grease seal kit to fit spindle size 1 3/8 with grease seal size ID 1.68 OD 2.33. The bearings is L68149. Do you have one that size ?
asked by: Lester C
Expert Reply:
We have a grease seal that matches the dimensions you have on your trailer. The seal we offer is part # 168233. This seal has a 1.688 inside diameter and 2.332 outside diameter.
The race that is designed to work with the seal is part # L68110. We also have the # L68149 bearings you mentioned, but they do not come in a kit with the race and seal mentioned.
You did not say if the # L68149 is the outer or inner bearing. Since you provided accurate measurements it sounds like you have a digital caliper. I recommend measuring both bearings to make sure you get all of the correct components.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.69 Inch I.D.
- 2.33 Inch O.D.
- Redline
more information >
Continue Researching
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Q&A: Replacement Boat Trailer Seal for a NOK AD2527E Grease Seal
- Q&A: Can I use a different seal than what comes with DX22XR
- Q&A: Ranger Trailer Cool Hub Replacement Grease Seal AD2527E
- Q&A: Diagram of the Dexter Self-Contained Hydraulic Jack- Square Tube DX72CR
- Q&A: Replacement for a TDE Model LP7000 Brake Actuator
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Tire Sizing