L68810 Bearing Recommendation for a L68149 Bearing
Updated 10/25/2011 | Published 10/24/2011
Products Featured in This Question
Question:
I ordered a bearing kit where the outers were L44649 and are correct. The inners were L68149 bearing. ID for spindle is correct. OD of race L68111 measures 2.362inch according to my mic. I need a race that will fit in a 2.327inch bore according to my snap gauge using the L68149 bearing.
asked by: Tim M
Expert Reply:
I have a race that will work for you. You would want a Redline Race # L68110. The outer dimensions of this race are 2.327 inches, and this will work with a # L68149 bearing.
Check out the video I attached that shows the outer dimension of the # L68110 and that it works with the # L68149 bearing.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Bearing and Seal Kit for Lippert 4.4k Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Bearing Kit for a 2022 Grand Design Transcend Xplor 265BH
- Q&A: Replacement Bearings, Races, Grease Seals & Brakes For Lippert 4,400LB Axle On Jayco Travel Trailer
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes