bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 5 on 5-1/2 Inch
  4. For 3500 lbs Axles
  5. Hub with Integrated Drum
  6. 13 Inch Wheel
  7. 14 Inch Wheel
  8. 14-1/2 Inch Wheel
  9. 15 Inch Wheel
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
etrailer

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased

Part Number: AKHD-555-35-K
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$82.83
Trailer Hubs and Drums
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Great Prices for the best trailer hubs and drums from etrailer. Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased part number AKHD-555-35-K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (25)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Hubs and Drums - AKHD-555-35-K

  • 5 on 5-1/2 Inch
  • For 3500 lbs Axles
  • Hub with Integrated Drum
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Pre-Greased
  • Standard
  • L44649
  • 1/2 Inch Stud
  • L68149
  • etrailer

Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Sturdy iron construction
  • Zinc-enriched paint on drum adds durability
  • Zinc-finished bolts resist corrosion
  • Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • Bearings, races, grease seal, grease cap, and lug nuts are included
  • QAI and CSA certified


Specs:

  • Application: 3,500-lb axles with #84 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Actual drum dimensions: 10-15/16" diameter x 2-10/16" wide
    • Works with 10" brake assembly
  • Bolt pattern: 5 on 5-1/2"
  • Wheel studs: 1/2" diameter x 1-1/4" long
  • Grease cap flange diameter: 1.988"
  • Weight capacity: 1,750 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Thoroughly Tested for Safety

This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


KBD2-555-19 AxleTek 10" Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 5-1/2 - Pre Greased

Compare to Dexter 84557UC3





Customer Satisfaction Score:


Customer Reviews

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased - AKHD-555-35-K

Average Customer Rating:  4.6 out of 5 stars   (25 Customer Reviews)

Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.

by:

They are still good



by:

Service was very good and fast delivery.



by:

just as described



by:

Ordered EZ lube 5 on 4-1/2". Was sent offer to substitute due to being back ordered. I seen it wasn't EZ lube, but was available for immediate shipping. Never paid attention that they also changed it to 5 on 5-1/2". Pay attention, their substitute offers may or may not match what you ordered.



by:

Package was in great shape when delivered and looks to be complete. Will install in a few days.



by:

as expected no more or less



by:

If it's very good I like it the only thing is I didn't think of the right diameter for the rim and stud I have to go get another rim to fit this drum but other than that it is awesome I will use my other Tire as a spare thank you e-trailers you guys are the best



by:

Brake drums are heavy, sturdy and appear well machined. Bearings and cones also appear to be well machined and should match exact. The wheel seals are double lipped which should add to life of seals. Will install the drums on trailer axle in near future, probably next weekend or two.



by:

These drums come with bearings already installed, packed with grease, and ready to mount. Super easy and fit perfect.



by:

This is the second time I have ordered these drums. The quality seems to be great. I can find no defects. The price was fantastic and came with free shipping. You can't really go wrong for the price. Now I can use the rims I want and they are the same size as my van so I could use my van spare tire as a back-up if needed going down the road. That makes thing a little bit easier.



by:

The hub received is working well. Fit up great. No issues with installation.

Ron M. profile picture

Ron M.

5/7/2018

Thanks for the follow up. The trailer has been working great with the new parts. Have had a lot of use with no issues.



by:

Got all the parts within 1 week. They were exactly what I ordered. With all the advise on the website, I was able to measure my trailer parts and order the correct replacement parts. Very easy to install. Glad I found and used this site.



by:

Dick profile picture

Dick

7/23/2023

Great, easy to mount. Great video!



by:

Product fit perfectly and arrived on ti me.



by:

I got exactly what I ordered.



by:

Mike R. profile picture

Mike R.

9/21/2024

With a little more than basic mechanics they were really easy to install. I upgraded to a heavier braking and leaf spring parts as the manufacturer had installed the bare minimum. Towing and braking is smoth an effortlessly.



by:



by:

Very nice product and customer service was awesome!!



by:



by:

easy, fast and good price



by:

Fit like a glove



by:



by:



by:



by:


25
25

See what our Experts say about this etrailer Trailer Hubs and Drums

  • Hub & Drum With Electric Brakes Replacement For AL-KO 8700 Hub
    The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 # AKHD-555-35-K will fit the spindle on your trailer to replace your AL-KO 8700 hub, but this does have a 5 on 5-1/2" bolt pattern. My information is the AL-KO 8700 has a 5 on 4-1/2" bolt pattern. BUT if you have or want to use wheels with a 5 on 5-1/2" bolt pattern you are fine with the hub you ordered; if you do have a 5 on 4-1/2" bolt pattern you will need the Trailer Hub and Drum Assembly - 3,500-lb Axles...
    view full answer...
  • Replacement Hubs And Brake Kits For A Trailer Buddy Hubs
    Hey mark I can definitely try to point you in the direction of the correct hubs and brakes for your trailer. I was not able to find any useful references for the numbers you provided, but there are other ways to determine the correct hub. Do you happen to know the weight capacity of the axle? That will help a lot in narrowing things down. Also, I assume this is an electric drum brake trailer? Let me know if not. Additionally, we will need to know both the inner and outer bearing sizes,...
    view full answer...
  • Availability of Replacement Dexter Trailer Hub 8-407 for 4,400 lb Trailer Axle
    Sounds like you are looking for the trailer hub/drum part # 8-407-5UC3-EZ which is for 4,400 lb axles, has the 6 bolt pattern wheel bolt pattern and also is the 8-407 you mentioned.
    view full answer...
  • How to Determine Correct Fit of Replacement Hub on Trailer Spindles
    Our range of 5-on-5-1/2 hubs for 2000-lb to 3500-lb axles is shown on the linked page. These items include both idler hubs like # AKIHUB-555-35-K for trailers without brakes and also hub/drums like # AKHD-555-35-K for trailers with drum brakes. All hubs include bearings, races, seals and lug nuts. As it happens, all of these 5-on-5-1/2 hubs use the same set of bearings, inner bearing # L68149 and outer bearing # L44649. A new hub has to use the same bearings as the one it replaces in...
    view full answer...
    Image 1 for
  • Replacement Trailer Hub for Hub Marked 8-247
    Thank you for the info you found on your current hub/drums. Based on that the correct replacement would be the part # 8-247-50.
    view full answer...
  • Self Adjusting Brake Assemblies for 3.5K Axles on 2008 Forest River Wildwood LE travel Trailer
    A 3500 lb axle would use a 10 inch brake assembly. For 10 inch self adjusting brake assemblies, I'd recommend part # AKEBRK-35-SA which includes right and left brake assemblies. The mounting hardware is sold separately as part # BRKH10B. You'll also want to examine the armature surface of your brake drums, which is the surface the magnets ride against. If that surface is grooved or pitted, you'll want to replace the hub/drums as well, as the new magnets wouldn't get a good grab on the...
    view full answer...
  • Trailer Hub Recommend for Utility Trailer with 5 on 5-1/2 inch Bolt Pattern L44649/L68149 Bearings
    The spindles of an EZ lube axle are the exact same as a non-EZ-lube. Only difference being the zerk fitting at the end of it. The EZ lube hubs we offer are the same as the non-EZ-lube hubs with the only difference being the grease cap has a rubber plug that fits the cap. For a replacement hub to replace yours with a 5 on 5-1/2 inch bolt pattern and matches your bearings of L44649/L68149 you would wan the part # AKHD-555-35-K for a non-EZ lube or part # AKHD-555-35-EZ-K for EZ-lube style.
    view full answer...
    Image 1 for
  • Recommendation For Extra Hub/Drum For Dexter 8-249 Hubs
    Dexter 8-249 hubs normally have inner bearings like Item # L68149 and outer bearings like Item # L44649. If these are your bearings (the size will be stamped on them) then it sounds like you need Trailer Hub and Drum Assembly Item # 84556UC3 by Dexter which also has 8-249 stamped on them. This hub and drum assembly fits a 5 on 5 bolt pattern. You may also need Trailer Hub and Drum Assembly Item # AKHD-555-35-K which fits a 5 on 5-1/2 bolt pattern. Be sure and check your bolt pattern...
    view full answer...
  • Can 3,500 Lb Hub be Used to Replace 2,000 Lb Hub with Same Size Bearings
    Technically yes, if you were replacing idler hubs, as long as the inner/outer bearing, grease seal AND wheel bolt pattern match, there's nothing that prevents you from using a 3,500 lb axle hub, like # 84545BX on a 2,000 lb axle. If the bearings and seal match but the bolt pattern is different, you would also need new wheels to make the hub compatible. That being said, the only 2,000 lb hubs that we carry which would use the same inner/outer bearings and grease seal as a standard 3,500...
    view full answer...
  • Hub Replacement for Old Trailer with 5 on 5-1/2 Inch Wheel Bolt Pattern
    All of our hubs with the 5 on 5-1/2 inch bolt pattern use the same bearing combination. If you measure your spindle or inner diameter of your bearing and find it to be 1.063" for the outer bearing inner diameter and the other bearing at 1.378' for the inner diameter then you'll be good to go. If not, we don't have a compatible option for your spindle and the best solution will be replacing your axle or just the spindle with # TRU74FR. If you have the spindle measurements listed above,...
    view full answer...
  • What 5 On 5 1/2 Hub Available For Timbren Axle-Less Trailer Suspension System
    The Timbren options we have available fit a 5 on 4-1/2 bolt pattern or a 6 on 5-1/2 bolt pattern. I recommend measuring your bolt pattern to make sure 5 on 5-1/2 is what you need. To confirm your measurement, use the distance between the center of one bolt hole to the center of the bolt hole adjacent to it (article on bolt patterns attached). If this measurement is 3-1/4 inches then you have a confirmed 5 on 5-1/2 pattern. If the 5 on 5-1/2 pattern holds true then a Timbren option...
    view full answer...
  • M416A1 Military Trailer Swapping Out Brakes for Electric With Parking Brake
    It would be best to go ahead and change out the drums when you install the new Brake Assemblies # K23-086-087-00. This will ensure that the brakes do wear in properly. I recommend using the Trailer Hub and Drum Assembly # AKHD-555-35-K. Of course you will want to verify that you have the same spindle that is required for this assembly. The spindle dimension for the grease seal is 1.719", the inner bearing is 1.378" and the outer bearing is 1.063". If those match your spindles than this...
    view full answer...
  • Can The Dexter Axle 10 X 1-1/2 Drum Be Upgraded To a 10 x 2-1/4" Drum?
    You will need to replace your Brakes # K23-472-473-00 and Hubs with the same 10" x 1-1/2" brakes you currently have. The 3,500LB Hub/Drum # AKHD-555-35-K uses a larger inner bearing which will not fit on your spindle. You will need to source the Hub/Drum 008-418-02 from Dexter as we no longer carry this part.
    view full answer...
  • Recommendation For Brakes And Drums For 3,500 Pound Capacity Axle
    To add brakes, you will need 4 bolt mounting flanges that are hopefully already included on your axle. If not, you will need to work with a certified welder to get them properly added. Assuming you have flanges or will have them professionally added, you will need to select hub-and-drum assemblies that are compatible with your trailer spindles. You will do this by matching the bearings and seals of your trailer with the proper hub-and-drum assemblies. Based on the information you...
    view full answer...
  • Replacement Hub/Brake Assemblies for Trailer with AL KO Hub 8700
    An AL KO 8700 hub is a 3,500 lb axle hub which we have replacements for that use the current 10 inch by 2-1/4 inch size. For that you'd need the hub part # AKHD-545-35-EZ-K and then for brake assemblies part number # AKEBRK-35-SA and you'd be set.
    view full answer...
  • Hub Assemblies For 3500 lb Axle On Tandem Axle Car Hauler 16 Foot
    For a 3500 lb axle, your options for bearing sizes are greatly narrowed down so that makes things a lot easier. You just need to determine your bolt pattern of your wheels. For traditional 5 on 4-1/2 inch bolt pattern, Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter, I recommend # AKHD-545-35-K. For 5 on 5 inches, I recommend # AKHD-550-35-K. For 5 on 5-1/2 inches, I recommend the # AKHD-555-35-K. For 6 on 5-1/2 inches, I recommend the # AKHD-655-35-K. If you have axles...
    view full answer...
  • Recommendation For Hubs For Single Axle Boat Trailer With 5 Hole Rims
    Thanks for the information you sent. To make a more accurate recommendation, I need to know your bolt pattern, whether you have brakes, inner and outer bearings sizes, and the capacity of your axle. With the information you sent, it sounds like you have a 3,500 lb trailer axle which often have inner bearings like Item # L68149 and outer bearings like Item # L44649. I do not know the exact bolt pattern of your wheels but the most common 5-bolt patterns are 5 on 4-1/2, 5 on 5, or 5 on...
    view full answer...
  • Recommended Hub And Drum For A Trinton Trailer
    When it comes to replacing the hub and drums on your Trinton Trailer I recommend the following depending on what your bolt pattern is: The Dexter Trailer Hub and Drum Assembly for 3,500-pound Axles - 10 inch Diameter - 5 on 4-1/2 # 84546UC3. The Trailer Hub and Drum Assembly - 3,500-pound Axles - 10 inch Diameter - 5 on 4-3/4 - Pre-Greased # AKHD-5475-35-K # The Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10 inch - 6 on 5-1/2 - Pre-Greased # AKHD-655-35-EZ-K The Trailer...
    view full answer...
  • Parts Needed to Add Electric Drum Brakes to Trailer with 5-on-5-1/2 Bolt Pattern 15-Inch Wheels
    To find hub/drum assemblies for electric drum brakes that will fit your existing spindles you will need to find the bearing part numbers from the existing hubs. The 5-on-5-1/2-inch bolt pattern hub/drums we offer for 15-inch wheels are shown on the linked page. These are available in weight capacities to match 2000-, 2200- and 3500-lb axles. Be sure to choose hubs rated for your axle; usually there will be a plate or sticker on the axle that tells you its weight rating. For example, if...
    view full answer...
  • Can The Hubs On a M1102 Light Tactical Trailer Be Converted To a 5 on 5-1/2" Bolt Pattern?
    Due to the weight capacity of the axle on your M1102 Light Tactical Trailer the only bolt patterns that will fit your spindle are a 6 on 5-1/2" or 8 on 6-1/2". You would have to replace your Spindle # TRU74FR on each side of your axle which would then require you to get new Brakes # AKFBBRK-35 and then 2 Hub/Drums # AKHD-555-35-K to have the 5 on 5-1/2" bolt pattern. Do understand this will lower the capacity of your trailer so if that is a problem you are going to have to stick with the...
    view full answer...
  • Parts Needed To Install Electric Trailer Brakes On a 3,500LB Idler Hub Trailer Axle
    Those measurements are consistent with a 3,500LB axle. I do recommend verifying the grease seal measurement as well as I have seen trailer axles that use a slightly smaller inner diameter Grease Seal # 168255TB(1.687"). If your grease seal landing measures 1.719" then the kit I recommend below will have all the correct components. You will need a Brake Flange # 4-35 on your axle. If you do not have one the axle should be taken to a shop to have this flange welded on as they will have...
    view full answer...
  • Replacement Electric Trailer Brakes for a Dexter 8-249 Hub
    You have done your research! I can confirm that the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K item # 23-468-469 is the correct brake kit you need for your Dexter 8-249 drums. If you are interested in replacing your Dexter 8-249 drums we have two options. The first is in a 5 on 5-1/2 bolt pattern item # AKHD-555-35-K. The second option is a 5 on 5 bolt pattern item # 84556UC3. If you trailer currently has a functional 7-way connector...
    view full answer...
  • Recommendation For Brakes And Drums For WT20GAB Boat Trailer
    Based on the information you sent, it looks like your inner bearings are Item # L68149 and outer bearings are Item # L44649 which are common for 3,500 lb trailer axles. I did not see in part descriptions the bolt pattern of your wheels but the most common patterns are 5 on 4-1/2, 5 on 5-1/2, and 6 on 5-1/2. I will make recommendations for all based on these bearings sizes. I have attached an article on "how to measure bolt patterns" in case you need it. For a 5 on 4-1/2 bolt pattern,...
    view full answer...
  • 3,500 lb Trailer Axle Recommendation that's 95 inches Long and 5 on 5.5 inch Bolt Pattern Hubs
    We have the parts you'll need! The axle you mentioned part # 7359765 is the correct starting point as it's a 3,500 lb axle that is 95 inches from hub face to hub face and has 80 inches between the spring seats. Then for hub/drums that have a 5 on 5-1/2 inch bolt pattern you'd want the # AKHD-555-35-K which fits this hub and then for brake assemblies you'd want the # AKEBRK-35R for the right hand side and the part # AKEBRK-35L for the left hand side. With all of these components you'd be set!
    view full answer...

Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924