Replacement Trailer Hub for Hub Marked 8-247
Published 04/19/2022
Products Featured in This Question
Question:
The part you are suggesting is galvanized. Do you carry the Dexter brake drum. The numbers on the side of the drum are 8-247 and on the other side it says MTA 9
asked by: Jeffrey F
0
Expert Reply:
Thank you for the info you found on your current hub/drums. Based on that the correct replacement would be the part # 8-247-50.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Peterson LumenX LED Trailer Tail Light - Weatherproof - Stop, Tail, Turn - 7 Diodes - Red Lens
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Search Results: electric drum brakes trailer brakes
- Search Results: brophy
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Video: Feature Breakdown: Jacketed 2 Wire (Brake Wire)
- Search Results: 12 gauge wiring
- Search Results: trailer wire
- Search Results: junction box
- Video: Detailed Breakdown of the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles
- Video: Breaking Down the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Search Results: trailer connectors trailer wiring
- Search Results: wire clamps
- Q&A: Wire Gauge for the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Q&A: How to Measure Trailer Brake Drum for Electric Trailer Brake Assemblies
- Q&A: What Gauge Wire Do The Dexter Electric Trailer Brakes 23-47-48 Use?
- Video: Review of Terran Industries Trailer Suspension Parts - Tandem-Axle Hanger Kit - TX65VJ
- Q&A: Wiring Wishbone Connector To Trailer With 4 Wires
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Q&A: What is the Difference Between Over 80 inch and Under 80 inch Trailer Tail Lights
- Q&A: Effect of Installing Shorter Shackle Straps on Trailer with Axle Over-Under Kit
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
Jeffrey F.
4/19/2022
The part you are suggesting is galvanized. Do you carry the Dexter brake drum. The numbers on the side of the drum are 8-247 and on the other side it says MTA 9