Recommendation For Extra Hub/Drum For Dexter 8-249 Hubs
Updated 01/03/2018 | Published 01/02/2018
Products Featured in This Question
Question:
Hi I’m trying to get a extra trailer hub/drum. The name in it is dexter and it’s a 5 lug. There is a part number of 8-249. Not sure if that will work. If not I can send a picture via email.
asked by: Kevin
Expert Reply:
Dexter 8-249 hubs normally have inner bearings like Item # L68149 and outer bearings like Item # L44649. If these are your bearings (the size will be stamped on them) then it sounds like you need Trailer Hub and Drum Assembly Item # 84556UC3 by Dexter which also has 8-249 stamped on them. This hub and drum assembly fits a 5 on 5 bolt pattern. You may also need Trailer Hub and Drum Assembly Item # AKHD-555-35-K which fits a 5 on 5-1/2 bolt pattern. Be sure and check your bolt pattern so that you get the right hub and some details about determining bolt pattern are covered in attached information.
Let me know if none of these will work and I will make a correct recommendation.
Additional information and videos attached.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: l68149
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Q&A: Determining Correct Replacement Hubs for Dexter 8-286 Hubs on 2,500 Pound Axle
- Q&A: Replacement for UFP HD1377 Trailer Hub/Drum
- Q&A: Replacement Hub Needed for Dexter Axle 8-256
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: 3500 lbs axle trailer brakes
- Search Results: trailer hubs and drums
- Shop: Brake Controller
- Q&A: Voyager Brake Control Wiring Diagram for Installation in a 2005 Chevrolet 1500 Silverado
- Search Results: l44649
- Q&A: How To Measure Current Wheel Studs To Determine An Adequate Replacement
- Q&A: Where is the Brake Controller Port Located on a 2005 GMC Yukon Denali
- Search Results: tekonsha p3
- Search Results: tekonsha 90195
- Search Results: 301500
- Q&A: How to get Power to the 7-Way on a 2004 Chevrolet Pickup for Installation of the Prodigy RF
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Shop: BOLT brand vehicle and hitch locks