Replacement Hub/Brake Assemblies for Trailer with AL KO Hub 8700
Published 10/02/2023
Products Featured in This Question
Question:
Can I convert an AL-KO 8700 brake hub 10inch x 1-/3/4 5 on 4.5 bolt pattern to a 10inch x 2-1/4 brakes? My shoes are worn at a little over 50 and I cannot source any new shoes so just looking towards the future.
asked by: Keone
0
Expert Reply:
An AL KO 8700 hub is a 3,500 lb axle hub which we have replacements for that use the current 10 inch by 2-1/4 inch size. For that you'd need the hub part # AKHD-545-35-EZ-K and then for brake assemblies part number # AKEBRK-35-SA and you'd be set.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: grease
- Search Results: brake backing plate
- Video: Comprehensive Review: Dexter Trailer Axle w/ Electric Brakes
- Q&A: Parts Needed To Install 6 on 5-1/2" Brake Hub/Drums on a M1101 Military Trailer
- Q&A: Length Measurements for EZ Lube Spindle 2.25
- Q&A: Brake Flange Pattern For #42 E-Z Lube Spindle
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Search Results: 3500 lb axle and spring kits
- Q&A: What Is The Difference Between Dexter Electric Brakes 23-180-181 and 23-105-106?
- Q&A: Recommended Replacement Axles to Replace Odd Sized 3,500 lb AL-KO Axles
- Q&A: Availability Of Replacement Rubber Aeon Springs For Timbren Axle-Less Suspension
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle