View Cart
Reese Titan Reducer Sleeve 2-1/2" to 2"

Reese Titan Reducer Sleeve 2-1/2" to 2"

Item # 58102

lowest price pledge

Retail:$30.89

Our Price: $18.95

You Save: 39%
Hitch Adapters

Orders above $99 qualify for Free Shipping

Shipping Weight: 3 lbs

Quantity: 
In Stock, Ships Today
Reese Hitch Reducer - 58102
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Hitch Reducer
  • Fits 2-1/2 Inch Hitch
  • No Extension
  • 2-1/2 Inch to 2 Inch
  • Reese
  • Steel
Bushing reduces Titan Class V receiver opening (2-1/2" x 2-1/2") to a Class III or IV receiver opening (2" x 2"). Call 800-298-8924 to order Reese hitch adapters part number 58102 or order online at etrailer.com. Free expert support on all Reese products. Guaranteed Lowest Price and Fastest Shipping for Reese Titan Reducer Sleeve 2-1/2" to 2". Hitch Adapters reviews from real customers.


  • All Info
  • Reviews (155)
  • Q & A (105)
  • Videos (3)
  • Photos
  • Why etrailer?

Reese Hitch Adapters - 58102

Bushing reduces Titan Class V receiver opening (2-1/2" x 2-1/2") to a Class III or IV receiver opening (2" x 2").


Features:

  • Adapts a 2-1/2" x 2-1/2" hitch receiver opening into a 2" x 2"
    • Works with factory-installed and after-market trailer hitches with a 2-1/2" square receiver opening
      • To use with Ford Super Duty pickups, modification may be required
  • Allows you to use your 2" towing and hitch-mounted accessories


Note: Ford OEM hitches have a tighter/different radius on their 2-1/2 inch receiver tubes. To accommodate the OEM Ford 2-1/2 inch hitch, the corners of a ball mount, shank or reducer sleeve may need to be sanded down to slide into the hitch. Do not remove any more material than necessary. Simply removing the paint or powder-coat is often sufficient.


Never use a grinder to knock-down the corners, which may remove too much material and will also heat the accessory and could compromise the product's structural integrity. This is especially the case with cast accessories like larger weight distribution shanks.



Product Detail



58102 Reese Titan Reducer Sleeve 2-1/2" to 2"






California residents: click here

Video of Reese Titan Reducer Sleeve 2-1/2" to 2"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Reese Hitch Adapters - Hitch Reducer - 58102 Review

Today were reviewing part number 58102. This is a Reese Titan Reducer Sleeve. It will take your 2 inch hitch receiver and reduce it to a 2 inch so that you can use your accessories that require a 2 inch receiver tube. This measures 5 inches total length and its 4 inches from this end of the bushing to the center of the hitch pin hole, and then its 1 inches from the center of the hitch pin hole to the other end of the bushing. This will work with a Ford Super Duty truck model year 2011 and newer, but because the radius on that particular hitch is a little bit different you might need some slight modification. And thats it for part number 58102, the Reese Titan reducer sleeve that takes your hitch from 2 inches to a 2 inch receiver..


Customer Reviews

Reese Titan Reducer Sleeve 2-1/2" to 2" - 58102

Average Customer Rating:  4.6 out of 5 stars   (155 Customer Reviews)

Bushing reduces Titan Class V receiver opening (2-1/2" x 2-1/2") to a Class III or IV receiver opening (2" x 2").

- 58102
by:

Arrived quickly. Very nice paint job. Expect it to work well. 464889



- 58102
by:

This ain't pretty. But size does matter. The 58102 2" X 2 1/2" receiver adapter hits the spot. It fits nicely into the 2 1/2" receiver with, at most, 1/8" space "slap" room. It's almost full length front to back inside receiver providing plenty of support for my 2" weight distribution system without slap. I have not hooked up my Forest River 29'4", 10,7 75 lb. GVWR Puma tow behind R/V but I do not have any fear of this well constructed, perfect fitting receiver adapter. The people at etrailer are there, willing and able to assist you. I have personally found that, if the C.S. Rep doesn't know the answer, she/he will find the answer and report back to you, in my case within minutes. My purchase was delivered (snail mail) within 5 days and In excellent condition. I will report back shortly after a trial run hooked up. 258003



- 58102
by:

Great Service Living in a very small town we do not have access to even a grocery store. Etrailer & UPS has been a big asset to us in products and delivery. Our most recent order was received in a very timely manner and it even works! The only gripe we have is that it was made in China. 3871



- 58102
by:

I ordered 2 hitch adapters (sleeves) an a hitch pin from etrailer over the phone because I could not find mine and I wanted to get these shipped quickly before I left on my hunting trip a few days later. I called late in the day, about an hour before closing, but Cathy still worked magic and got my shipment put together and on the truck that night! My items arrived a couple of hours before I planned to leave. Cathy saved the beginning of my trip! For the review of the 2 square pieces of metal tubing --- they worked great :-). This review is for the outstanding customer service I've experienced each time I've ordered anything from etrailer.com, but especially this time from Cathy. 310692



- 58102
by:

Hatch adapter works well with trailer hatch extension. 575512



- 58102
by:

Product was fine for the money. Customer service was very helpful as always! 573454



- 58102
by:

Since most hitches are 2.5 in., you’re going to need this. It worked perfectly and was super easy to use. 561186



- 58102
by:

Great - works well 558798



- 58102
by:

LIKE A GLOVE - 2019 F250 Lariat - Ordered as a reduction sleeve for my new trucks Class V trailer hitch. Received this very quickly and this part is BEEFY.. I Just removed the sticky label and inserted into the 2 1/2" hitch receptical, added the pin to secure it. DONE. 609190



- 58102
by:

just like the one that came with the truck as original equipment 594604



- 58102
by:

Great product just a sleeve but it does what I need it to do. 584524



- 58102
by:

Received the product today. Easy ordering and arrived as ordered. etrailer always makes it easy to order and they seem to always have the products needed. Thanks 581220



- 58102
by:

Excellent Service and Fast Delivery!! 579761



- 58102
by:

works great. good fit. 546094



- 58102
by:

Standard part. Nice fit and finish. 526477



- 58102
by:

Had exactly what I was looking for and it was delivered in just two days. The price was right and quick delivery. Perfect as far as I'm concerned. 515680



- 58102
by:

Works as advertised. Quick shipping. Great price. 503096



- 58102
by:

Perfect! For chevy 2500hd 2012. Class 5 to class 4. Ended up putting in hole,lined up pin,then took some jb weld on the inside and made a stop so it would line up with the hole. 499997



- 58102
by:

Works great to reduce the newer hitch size to the 2" size. 495314



- 58102
by:

Fit perfectly on my 2016 Ford F350 Dual ly. 487489



- 58102
by:

Exactly as advertised. Excellant fast s hipping. 472135



- 58102
by:

did what I needed it to do. delivery was prompt. wife won't lose this one. good co. to deal with. 463729



- 58102
by:

Fast shipping with fair pricing. 458599


Comments

Doing well with no complaints.

Mark - 12/09/2018

46536

- 58102
by:

The best site on the internet for ordering anything hitch related! Got everything I ordered and it's all as expected! 457087



- 58102
by:

needs a better locator 447863



- 58102
by:

Too loose, no shoulder. 446353



- 58102
by:

everything went just like you said. excellent job, very well done. my boats back behind my truck where it belongs. Thank you. gone fishin!!!!! 444695



- 58102
by:

Image attached 439381



- 58102
by:

Purchased for a 2017 Ford F250 with factory 2 1/2" receiver. Fits perfectly right out of the box. Some reviewers mentioned that they had to file the edges a bit, but I did not. Excellent quality, excellent fit. 425795



- 58102
by:

Doesn't fit well in my F350 Superduty. It is short one way or long the other. 421941



- 58102
by:

Prompt delivery. Quality construction. Fits like a glove. 416892



- 58102
by:

This fits a Curt 2 1/2 receiver perfectly. Allows me to use receiver with my various drawbars for different trailers when I am not using the Forklift hitch box extension. 410599


Comments

Fine sold the truck to neighbor who makes good use of it with camper.

Richard E - 07/25/2018

41453

- 58102
by:

Great! 400389



- 58102
by:

works well have been towing 28 ft travel trailer with f250 no issues 378448



- 58102
by:

Performed as advertised. 366741



- 58102
by:

Order was packaged well. All parts of order are exactly what I needed. Will gladly do business with ETRAILER again 365812



- 58102
by:

I received excellent service placing my order!! The products were exactly what I ordered and I am well pleased with them, 362317



- 58102
by:

Have used the adapter for a year now and have had no issues. The unit wiggles a little when in place but I image that is necessary for it to slide into place correctly. The unit does not wiggle once connected to the trailer and I can't hear any noises coming from the hitch when towing. I would buy this unit again. 358055



- 58102
by:

The new truck hitch to the old Working great 348993



- 58102
by:

Great prices. Good quality. 351190


Comments

Great

Perry M - 03/03/2018

35346

- 58102
by:

This piece fits nicely and works as it should. 345206


Comments

Everything still works and fits as it should.

Cory W - 02/24/2018

35082

- 58102
by:

As has been widely reported this thing does not fit "snugly" into the 2 & 1/2" hitch receiver. Because the reducer sleeve is not a "snug" fit it rattles around a bit and is showing signs of wear around the pin hole. Fortunately I bought a 2 & 1/2" shank instead of relying solely on the reducer. 344593



- 58102
by:

Just as described, but 1/3 of price at Ford house. 332748



- 58102
by:

Works as expected 322844



- 58102
by:

It's a chunk of pipe. Nuf said. 318016



- 58102
by:

Exactly what I ordered. Exactly what I needed. Quick and precise delivery. 316969



- 58102
by:

Perfect...Just what I needed to downsize my current 3" receiver opening... 313489



- 58102
by:

Order this with my new 2.5" hitch. All of the hitches I have are 2" so I can still use those and can add 2.5" hitches to the mix now. 311728



- 58102
by:

Received this reducer within 4 days of ordering it which was impressive. Installed into my receiver and am very satisfied. I can feel just so ever lightly a little play but nothing that would ever cause me concern pulling our 37" travel trailer. Upon installing the ball hitch into this again very very little play if any. 311706



- 58102
by:

On time perfect fit.. High quality 308886


58
163
Show More Reviews

Ask the Experts about this Reese Hitch Adapters
Do you have a question about this Hitch Adapter?


  • Is There a Sleeve For my 2-1/2 inch Ford F350 Super Duty Hitch So I can Use 2 Inch Accesorries
  • 2-1/2 inch hitch opening are used on hitches that are Class V, and are designed to haul large heavy trailers. In order to reduce your hitch down to a 2 inch diameter opening on your new Ford F-350 Super Duty you would need to purchase a Titan Reducer Sleeve 2-1/2 inch to 2 inch, part # 58102. You should take note that Ford OEM hitches have a tighter/different radius on their 2-1/2 inch receiver tubes. To accommodate the OEM Ford 2-1/2 inch hitch, the corners of a ball mount, shank...
    view full answer...

  • Availability of an Adapter to Use the Titan Hitch Extender # RP45018 with a 2 Inch Hitch
  • I cannot recommend either of the situations that you mentioned for safety reasons. If you were make a reducer for the Titan Hitch Box Extension for 2-1/2 inch Trailer Hitches, 41 - 48 inches, item # RP45018, it would lower the weight carrying capacity of the hitch and the extension, and could cause an unsafe towing condition. A solid steel bar while it seems very sturdy would most likely have less weight carrying capacity than a square tube extension like the Titan extension. The...
    view full answer...

  • Can a 2-1/2 to 2 Inch Reducer Sleeve be Used with Weight Distribution Systems
  • Generally speaking the use of a reducer sleeve does not decrease the capacity of a trailer hitch. However some hitch manufacturers may have a reduced capacity if a sleeve is used. There isn't a standard for all hitches and all reducer sleeves. It depends on the hitch and the sleeve. The weight distribution system may also have a reduced capacity which should be in the literature for your weight distribution system. The other option is to replace the weight distribution shank with one...
    view full answer...

  • Will the Use of a 2-1/2 Inch to 2 inch Trailer Hitch Reducer Sleeve Reduce the Hitch Capacity
  • You have a couple of options. The best thing to do would be to use a ball mount that fits in your hitch. The reason is that you will not have to worry about a reducer sleeve fitting, any capacity reduction, or adding another component in the system. For 2-1/2 inch receivers we have # RP45322, or # RP45323 for an 18,000 pound fixed ball mount. The other option is to use a reducer, # 58102. The hitch capacity should not be dramatically changed so if it is rated to tow the 13,000 pounds...
    view full answer...

  • Recommended Adjustable Ball Mount for 2.5 Inch Hitch Receiver
  • The highest rated adjustable ballmount for a 2-1/2" hitch receiver is rated for 10,000 lbs. So I would recommend going with the Curt Channel Style Adjustable Ballmount # C45900. This adjustable ball mount is rated for 14,000 lbs, and has a rise of 5-1/4" and a drop of 6" and fits 2" trailer hitch receivers. You will then want to use a reducer like # 58102, which adapts a 2-1/2" x 2-1/2" hitch receiver opening into a 2" x 2. I spoke with my contact at Curt about adjustable ball mount...
    view full answer...

  • Hitch Reducer Sleeve to Allow Use of 2-Inch Weight Distribution Shank in 2-1/2-Inch Hitch Receiver
  • To convert your truck's 2-1/2-inch Class V hitch to a 2-inch opening for use with a 2-inch weight distribution shank you can use Reese part # 58102. This reducer sleeve is fully compatible with weight distribution systems and other 2-inch hitch-mounted accessories. You can click on the two linked videos for more information. You will also want to check your hitch's safety ticker to confirm it is rated for use with weight distribution.
    view full answer...

  • Why Does Use of Hitch Adapter/Extender Reduce Hitch Tongue Weight and Trailer Weight Ratings
  • Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender # HE18 and Curt Hitch Extender # C45791 both cause a loss of capacity because they change the geometry of the hitch set-up. The added length of the adapter will allow greater leverage to be applied to the hitch tube by the attached trailer or accessory; this is what...
    view full answer...

  • 2-1/2 inch to 2 Inch Receiver Adapter to Accept 2 Inch Shank
  • Yes, we have the Titan Reducer Sleeve 2-1/2 inch to 2 inch, item # 58102. Finally, we have the Diversi-Tech 2-1/2 inch to 2 inch Adapter Kit for DTLBM and DTALBM Series Locking Ball mounts, item # DTADP35, which is designed to work with the Diversi-Tech Aluminum ball mounts and includes a Long-span, locking hitch pin.
    view full answer...

  • Trailer Hitch Extension for Use Behind a Truck Bed Camper
  • I have two options that will allow for you to extend the connection point between your truck and trailer. The best option for you will depending on the gross trailer weight (GTW) and tongue weight (TW) of your trailer. As long as the GTW and TW of your trailer does not exceed 5,000 lbs and 500 lbs respectively, the Titan Hitch Box Extension part # RP45018 will work well for you as long as you trim the bar down to 41". If the GTW and TW of your trailer exceeds the above 5,000lb/500lb rating...
    view full answer...

  • Hitch Receiver Extension and Reducer for Towing a Trailer with a Truck Camper
  • There's a couple of ways you can do this. Which way is better will depend on the amount of extension you need. One is to use an extension, like the Curt # C45048 which will give you an extra 24 or 34 inches. Then you will use a ball mount in the extension that also reduces your hitch to a 2 inch receiver. Another is to use a reducer in the 2-1/2 inch receiver. The Reese Titan # 58102 will work for this. Then get an extra long ball mount like the Hidden Hitch # 80232 that is 15-3/4...
    view full answer...

  • Is Different Weight Distribution Shank Needed for 2-1/2 Inch Trailer Hitch on 2015 Chevy Silverado
  • You do not need to use a different shank at all. All you need is a reducer sleeve, # 58102. It will fit inside the 2-1/2 inch receiver on your Chevy Silverado and the 2 inch shank you already have will fit. I do not recommend mixing weight distribution manufacturer parts because they are not tested together.
    view full answer...

  • Recommended Weight Distribution and Sway Control for a 2011 Ford F-250 Towing a Keystone Trailer
  • Yes, you could certainly add a weight distribution system and sway control to improve your towing performance, but the systems we offer for 2-1/2 inch trailer hitches are going to be a bit too heavy duty for your particular trailer. The 2-1/2 hitch systems would be compatible for tongue weights up to 1700lbs, but your trailer, even with a maximum load, should only have around 975 or 1000lbs of tongue weight. In this case, I would typically recommend a system rated for tongue weights up...
    view full answer...

  • Ball Mount Options for a 2014 Ram 2500 With OEM Class V Trailer Hitch
  • Most of the domestic truck manufacturers are putting Class V trailer hitches with a 2-1/2 inch receiver on their 3/4 ton trucks, including Dodge. This is mainly because they are building their trucks stronger and stronger each year and they need to install the equipment that can handle the higher capacities. You have a few different options when it comes to ball mounts and hitch balls. If you want to use your current equipment, you could use a reducer sleeve like part # 58102. This...
    view full answer...

  • Hitch Bike Rack Recommendation for 2-1/2 inch Trailer Hitch
  • I verified with Swagman that the XTC-2 # S64670 will work with a 2-1/2 to 2 inch hitch reducer except for the hitch pin. In order to accommodate the 2-1/2 inch hitch receiver you will need the Locking, Anti-Rattle, Threaded Hitch Pin # S64029 or the Anti-Rattle Hitch Lock and Cable # S64031. For a hitch reducer you can use # 58102.
    view full answer...

  • 16k Capacity Pintle Hook and Mount Recommendation for a 2-1/2 inch Hitch Needs 8 inch of Drop
  • For a pintle mount you will want the B&W Pintle Hook Mounting Plate # BWPMHD14005. This mount is 12 inches tall so it should work well to give you the 8 inches of drop you need. This is designed to fit a 2 inch hitch so you will need the adapter part # 58102 to fit your 2-1/2 inch hitch. Currently we don't carry a 2-1/2 inch pintle mount with that much drop so this is your best option. For a pintle hook you would want the part # MT70240. All of the components I mentioned have 16k capacities.
    view full answer...

  • Hitch Receiver Reducer for Towing a Horse Trailer With Ford F350
  • It is perfectly safe to use a reducer like the # 58102 you referenced. Using the reducer will not reduce the amount of weight the vehicle can tow, but a ball mount for a 2x2 receiver would typically has a lower towing and tongue weight capacity than a ball mount for a 2-1/2x2-1/2 receiver would. Just be sure that the weight of the fully loaded trailer does not exceed the weight of the lowest rated component of the towing system, like the hitch, ball mount, trailer ball, etc. If your...
    view full answer...

  • Anti-Rattle Hitch Stabilizer for Use in 2-1/2-Inch Hitch with Reducer Sleeve
  • The Brophy Stabilizer Bracket # RHSB will not work with a 2-1/2-inch hitch that is used with a reducer sleeve like # 58102 but we do have options that will. All anti-rattle devices for use with a 2-1/2-inch hitch like the one on your 2010 Silverado are displayed on the page I linked for you. The one I recommend is the Roadmaster Quiet Hitch # RM-062. This item is rated for both accessory use with things like bike racks and also for towing applications. You can use this so long as your...
    view full answer...

  • Extending a 2 Inch Trailer Hitch and Adapting a 2-1/2 Inch Hitch to a 2 Inch
  • The Titan hitch extension, # RP45292, is designed to fit 2-1/2 inch receiver. The other end has a 2 inch receiver opening. If you have a 2-1/2 inch receiver and want to drop down to a 2 inch without using a long extension, you can use a reducer sleeve, # 58102. If you wanted to go the other way, adapt a 2 inch receiver for use with 2-1/2 inch accessories, there is no adapter that will work. If you need to extend a 2 inch receiver we have several available. Please note that by using...
    view full answer...

  • Hitch Adapter Recommendation for a Class V Hitch so that it Can Be Used with 2 inch Accessories
  • It sounds like you have a Class V hitch with a 2-1/2 inch opening on it. 2 inch hitches are more common so if you wanted an adapter to let you use 2 inch accessories the part # 58102 would be what you would need. I attached a couple FAQ articles to the right that explain the differences between the hitch sizes and the classifications.
    view full answer...

  • Recommended Hitch Adapter for 2-1/2 Inch Trailer Hitch on Ford F-150 Raptor
  • If your Ford F-150 Raptor has a 2-1/2 inch trailer hitch receiver, you can use the Reese Titan Reducer Sleeve # 58102 to reduce the receiver opening to 2 inches. You will then be able to use the ball mount you have that is compatible with 2 inch receivers. If you instead have a 2 inch hitch receiver opening on your truck and the ball mount is for 2-1/2 inch receivers, we unfortunately do not have any available adapters that will expand the 2 inch opening to be able to work with a 2-1/2...
    view full answer...

  • Recommendations for an Adjustable Ball Mount with Multiple Balls and Height Adjustments
  • That is a difficult question to answer because there are so many variables. On bigger trucks with receiver heights well above the ground going with an adjustable ball mount with the most rise or drop would be fine in this case and would be what I recommend. There is no rule of thumb as far as how much space you should have from the ground to the bottom of the ball mount because there are so many things you would have to factor in. Vehicles that are lower to the ground like vans for example...
    view full answer...

  • How to Use an Equal-i-zer Weight Distribution System on a 2017 Ford F-250 with a 2-1/2 Inch Receiver
  • There isn't an Equal-i-zer weight distribution system that directly fits a 2-1/2 inch hitch receiver. You can use a reducer, like part # 58102, as you said. Another option is to purchase a shank that will fit a 2-1/2 inch receiver. The Equal-i-zer Weight Dist Shank # EQ90-02-4900, for example, provides 10 inches of rise or 6 inches of drop. I've linked the selection for you so you can choose the correct rise or drop you need.
    view full answer...

  • Fit Issue With Reducer Sleeve # 58102 On A 2011 Ford F350 Super Duty With OEM Hitch
  • It has come to our attention that there are fit issues with 2-1/2 inch accessories and 2-1/2 inch OEM Ford hitches. Ford uses a tighter/different radius on the inside corners of their 2-1/2 inch receiver tubes. Some accessories will drop in just fine, but fairly often the accessory will not fit in the hitch, be it a WD shank, reducer sleeve, or draw bar. To accommodate the OEM Ford 2-1/2 inch hitch, it is fine to sand the corners of a ball mount or shank down to get it to slide into...
    view full answer...

  • What Would Cause the Top of a Trailer Hitch Ball to Wear Excessively After 300 Miles
  • If the ball is smaller than what the coupler requires then the coupler would be able to move around quite a bit and wear down the ball. If the ball is the right size then excessive tongue weight could be a factor. The trailer tongue weight is typically 10 to 15 percent of he gross trailer weight. The ball you use will need to be rated higher than the gross trailer weight. You can also lubricate the ball so that there is less friction. Some ball lube such as # 58117 would work well...
    view full answer...

  • Reducer Sleeve for 2-1/2-Inch Hitch to Allow Use of Husky 2-Inch Weight Distribution Shank
  • It is rare that using a hitch adapter of any type has no down side but in the specific case of using a 2-inch weight distribution shank along with a reducer sleeve in a 2-1/2-inch hitch, this combination of products is perfectly safe and okay to do. In this instance it will save you a good bit of cash too. You can use Reese part # 58102 to reduce your hitch opening from 2-1/2-inches down to the 2-inch size of your Husky weight distribution shank. Curt part # C45405 is also suitable. If...
    view full answer...

  • 2-1/2-Inch to 2-Inch Hitch Reducer Sleeve
  • Curt Hitch Reducer # C45405 provides the 2-1/2-inch to 2-inch reduction in receiver size that you need, just like # 58102, and it has a flare on its sides to prevent the sleeve from sliding into your receiver.
    view full answer...

  • Will the Titan Reducer Sleeve for 2-1/2 inch Hitches Fit on My 2010 Chevrolet Silverado 2500
  • I went out to the warehouse an pulled the Titan Reducer Sleeve 2-1/2 inch to 2 inch, and measured the inside dimension of the one I pulled at 2.068 inches with a dial caliper, I also measured the outer dimension at 2.469 inches, see attached photos I took for you. You mentioned tolerance, and that is an unknown factor. All hitch manufacturers and hitch accessory manufacturers have to stay within certain guidelines, to ensure that their product will work with other accessories on the...
    view full answer...


Do you have a question about this Hitch Adapter?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality hitch adapters for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch adapter information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Expert Research:
Michael L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Expert Research:
John H
Test Fit:
Matthew K
Expert Research:
Adam R
Updated by:
Laura H
Video Edited:
Dustin K
Installed by:
Cole B
Test Fit:
Shane T
Expert Research:
Jeffrey L
Updated by:
Sarah W
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924