1. Towing
2. Hitch Adapters

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The base plate kit that I recommend for your 2013 Ford C-Max is the Blue Ox #BX2639. This will work perfectly with the Blue Ox Alpha Tow Bar #BX7380 that is rated for 6,500 lbs and comes with coiled safety cables with the same weight rating. For…

Hi Jack, The Roadmaster Dual Hitch Receiver Adapter #RM23SR was designed to do exactly what mentioned - flat tow while also using a rack or cargo carrier of some kind. That said, it's important to note the #RM23SR has a 400…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the…

Hey Gary, so the holes that are on the CE Smith trailer axle part #CES84XR are currently at 38-1/2 inch on center so there would easily be enough room to put new ones at just 3/4 of an inch past where they are now but you would need to rotate the…

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system…

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar,…

The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you…

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

Hey Chris, thanks for reaching out! I checked with out manufacturers and unfortunately it looks like the only hitch receiver sizes designed to fit your 2024 Honda Accord are the smaller 1-1/4" receivers. You can technically…

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue…

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The base plate kit that I recommend for your 2013 Ford C-Max is the Blue Ox #BX2639. This will work perfectly with the Blue Ox Alpha Tow Bar #BX7380 that is rated for 6,500 lbs and comes with coiled safety cables with the same weight rating. For…

Hi Jack, The Roadmaster Dual Hitch Receiver Adapter #RM23SR was designed to do exactly what mentioned - flat tow while also using a rack or cargo carrier of some kind. That said, it's important to note the #RM23SR has a…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one…

Hey Gary, so the holes that are on the CE Smith trailer axle part #CES84XR are currently at 38-1/2 inch on center so there would easily be enough room to put new ones at just 3/4 of an inch past where they are now but you would need to rotate the…

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system…

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow…

The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you…

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

Hey Chris, thanks for reaching out! I checked with out manufacturers and unfortunately it looks like the only hitch receiver sizes designed to fit your 2024 Honda Accord are the smaller 1-1/4" receivers. You can…

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum…

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum…