Recommended Flat Tow Parts for a 2025 Jeep Wrangler Sport Towed By A Tiffin RV w/ Quick Connect Air

Updated 11/01/2026 | Published 12/01/2025

Products Featured in This Question

Towed Vehicle Battery Charge Line Kit for Demco Air Force One and Stay-IN-Play Duo Braking Systems

(270)

$54.38

Demco Air Force One Flat Tow Brake System for 2020 and Newer Tiffin Chassis RVs w/Factory Air Brakes

(587)

$1329.50

etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates - RV Mount - 6,000 lbs

(366)

$892.16

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3628)

$183.35

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3702)

$575.00

Roadmaster Stop Light Switch Kit

(718)

$53.40

Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights - 7-Way to 6-Way Adapter Cord

(395)

$235.02

Question:

I have a 2025 Tiffin Bus that has a quick air connection for air force one tow vehicle brake system and I want to tow a 2025 Jeep Wrangler Sport. Can you put together a recommended complete flat tow system for me.

asked by: Galen J

Expert Reply:

I sure can Galen, and thanks for the information. Since your Tiffin motorhome has the air line connection you'll need the Demco Air Force One Flat Tow Brake System for 2020 and Newer Tiffin Chassis RVs w/Factory Air Brakes item # DM55MV. This comes with all the components necessary for install on your Jeep. The included air line will connect directly to your Tiffin.

Here are the rest of the parts you will need to flat tow your 2025 Jeep Wrangler Sport:

Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates item # e74ZR

Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521453-5 - factory steel or plastic bumper only

Wiring Kit - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267
or
If your Jeep has the ParkSense Proximity Sensors - Roadmaster Wiring Kit for Variable Voltage LED Tail Lights item # RM63MR

Charge Line - Towed Vehicle Battery Charge Line Kit for Demco Air Force One Braking Systems item # DM66VR

Stop Light Switch - Roadmaster Stop Light Switch Kit item # RM-751490

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.

Does your Jeep have the Parksense feature?

You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.

expert reply by: Jerred H

RM-521453-5
(click to enlarge)

Galen

12/3/2025

Does your Jeep have the Parksense feature? How do I know if I do or not??

Jerred H.

12/3/2025

@Galen You can tell if your Jeep has ParkSense by looking for a button with a "P" and a steering wheel on the center console, or by checking the bumpers for small, circular sensor holes. The system can also be found by checking the Safety and Driving Assistance settings on your Jeep's touchscreen.

Galen J.

12/4/2025

I'm traveling for the next 2 weeks, when I get home I'll review further.

Galen J.

1/15/2026

Can you provide more information on the high/low hitch adapter, the center of my RV receiver tube is 21.5” and my Jeep base plate arms is 15.5” off the ground, 6” difference Thank you

Jerred H.

1/15/2026

@GalenJ I sure can! You're going to want your baseplate and tow bar to have no more than 3" of vertical distance separating them to be considered level. The Curt High-Low Adapter for Tow Bars item # C59KR you were looking at will definitely work. This tow bar has a 4" Rise/Drop so it'll put you within 2".

Galen J.

11/1/2026

I bought a Demco braking system from you and Im traveling and using the system and did not bring the installation manual with me. I need to adjust the monitoring system, the braking system works ok but the red light on the monitor stays on sometimes, I believe I need to adjust the braking cylinder inside my jeep. Can you send the installation/adjusting instructions.

Jerred H.

11/1/2026

@GalenJ Welcome back Galen. I linked the installation instructions below for the Demco Air Force One you purchased. If the red indicator light is constantly on then it's likely just the placement of your reed switch on the air cylinder itself. The reed switch detects magnets and closes the circuit, sending power to the indicator light. Try moving it further toward the end of the cylinder (closer towards yourself). When installing the reed switch it's important to be careful because the reed switch can arc to ground, it will either no longer work or cause the LED to stay illuminated at all times. https://cdn.demco-products.com/documents/Manuals/TB20050_2025-08-21-204337_gxir.pdf?m=20250821154337