See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

• Converting Standard 7K Grease Hubs to Oil Bath Hubs
  Initially what you need to do is clean out all of the grease in your hub, on/in the bearings, and on the spindle. Once that is done you simply swap out the grease seal for the oil seal included in the Kodiak XL ProLube Kit # XLPROLUBE2440KIT (which has a 2.25" ID and 3.376" OD) and reinstall everything. You do need to make sure that the ID of the oil seal matches up with your current system so that it keeps your oil from leaking. If you are needing to replace the bearings and seals as...
  view full answer...
• What Is the Weight Capacity Of a Dexter D100G Axle
  The spoke with Dexter and the code "D100G" tells me you have two 10,000 lb trailer axles. I have attached some parts you may need for the axle below. Dexter Trailer Hub Drum Assembly (After July 2009) - part # 8-430-5UC3 Dexter Trailer Hub and Drum Assembly (Before July 2009) - part # K08-288-90 Dexter Electric Trailer Brake Kit (12-1/4" x 4") - part # 23-438-439 Dexter Hydraulic Drum Brake Kit (12-1/4" x 4") - part # 23-404-405 Inner Bearing - part # 387A Inner Race - part # 382A Outer...
  view full answer...
• What are the Correct Bearings and Races for Dexter 8-201 Electric Drum Brakes?
  The Dexter hub you referenced, 8-201, is a 5,200 lb hub, though a 5 on 4-1/2 bolt pattern does not come on 5,200 lb hubs. The correct bearings for the 5,200 lb hub are # 25580 and # LM67048, while the proper races are # 25520 and # LM67010. I have attached a link to a help article on wheel bearings that you may find useful. If you can provide the diameter of the brake assemblies and/or the axle capacity, I would be happy to make a specific recommendation for you.
  view full answer...
• Do You Have a Replacement Bearing Kit for a Lippert 8,000 lbs Axle?
  Hey Michael, thanks for the information and welcome back. While I don't have a bearing kit for a Lippert 8k axle I do have all of the components you'll need. I have listed them below: Inner bearing item # 25580 Inner race item # 25520 Outer bearing item # 02475 Outer race item # 02420 Grease seal item # GS-2250DL Cotter Pin item # 165649 These parts are all sold individually. Are you doing routine maintenance or do just want to have an extra set on hand in case of emergencies? You...
  view full answer...
• Bearings and Races for 7,000 Pound Trailer Axle
  The most common bearings and seals for a 7,000 pound axle are # 25580 inner bearing, # 14125A outer bearing, # 25520 inner race and # 14276 outer race. The grease seal can vary, and will usually either be the # GS-2250DL, which has a 2.250 inch inner diameter and 3.376 outer diameter, or # GS2125DL with a 2.125 inch inner diameter and 3.376 inch outer diameter. We do also offer complete bearing kits for this axle. For the GS-2250DL grease seal, you can use the Kit # BK3-200. For the #...
  view full answer...
  
• Looking For Replacement Bearings And Hub Kit For 2017 Airstream Flying Cloud
  Hey David, thanks for reaching out. That is a slick camper. Your 2017 Airstream flying cloud uses a #11 Dexter axle. It uses a # 25580 (1.75" inner diameter) inner bearing and # M67048 (1.25" inner diameter) outer bearing. We can provide bearings and a hub kit for this. Here are the exact part numbers: - Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2 # 8-201-5UC3-EZ - Replacement Trailer Hub Bearing - 25580 # 25580 - Replacement Race for 25580 Bearing...
  view full answer...
• Bearing And Seal Kit Needed For A Dexter D60 Axle
  Hey Brian, For inner bearing # 15123 you would need race # 15245 and for outer bearing # 25580 you would need race # 25520. The grease seal can be purchased with part # GS-2250DL. The Timken Bearing Kit # TMK42VR would include 15123/25580 Bearings, 15245/25520 Races, and 412920 Seal (2.25" ID/3.376" OD).
  view full answer...
• What Is The Difference Between Dexter Hub/Drum 8-201-5UC3-EZ And 8-201-9UC3-EZ
  Hi Jim! The Dexter Trailer Hub and Drum Assembly # 8-201-5UC3-EZ and # 8-201-9UC3-EZ are very similar, but there are a couple differences. You noted the weight capacity differences, and that is due to the bearing combination, which I have listed below: # 8-201-5UC3-EZ Inner bearing # 25580 (1.75" inner diameter) Outer bearing # LM67048 (1.25" inner diameter) Inner race # 25520 Outer race # LM67010 # 8-201-9UC3-EZ Inner bearing # 25580 (1.75" inner diameter) Outer bearing # 15123 (1.25"...
  view full answer...
• Replacement Trailer Brake Assemblies For a 2011 Forest River Sierra 5TH Wheel Camper
  I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 for your 2011 Forest River Sierra 300RL. These will only require you to adjust the brakes to ensure they are set correctly when you install them. After that they will self adjust themselves as the brake material wears away. This will ensure your brakes last longer and will keep you out from under the trailer adjusting the brakes. The Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K will provide you with a new hub/drum...
  view full answer...
• Replacement Brakes, Bearings, Seals, and Races for a Dexter 9,000 lbs Axle
  Hey Brandon, thanks for the information. The Electric Trailer Brake Kit w/ Dust Shields item # AKEBRK-10 are exactly what you need. These self adjusting electric brakes are rated for 9,000 lbs and 10,000 lbs axles. You will need one set per axle. I recommended replacing your mounting bolts with the Mounting Bolts and Hardware for 12-1/4" Brake Assemblies item # BRKH122510. This will replace one axle's brake mounting bolts and hardware. For replacement bearings and seals there is not a...
  view full answer...
• Replacement Bearings for Dexter 5,100 Pound Axle on Grand Design Trailer
  I reached out to my contact at Dexter and with the serial number you provided they were able to track down the correct replacement bearings for the spindles on your axles. For the inner bearing you will use part # 25580 for the bearing itself and # 25520 for the race. For the outer bearing you will use part # LM67048 for the bearing and # LM67010 for the race. The correct grease seal is part # RG06-070. For a complete kit that includes these bearings, races, and seal, you can use our...
  view full answer...
• Determining Replacement Hub And Bearings For Dexter P-12 SLR Trailer Axle
  I can definitely help you find the correct replacement hub and bearings for your Dexter P-12 SLR axle, but since part of the serial number was unreadable you will need to take a few simple steps to identify which bearings your axle uses. The easiest way to accomplish this is to remove one hub and look for the numbers stamped on the inner and outer bearing like shown in the attached picture of the # L44649. If your bearings are too worn to be able to read the numbers, you will need digital...
  view full answer...
  
• Replacement Bearings For A 6,000 Pound Dexter Axle
  Hi Roger! I contacted Dexter with your axle information and you will need the # 25580 inner bearing and # 14125A outer bearing. If you want the races as well, you will need the # 25520 and # 14276 respectively. The seal will be the Double Lip - 2.250" ID - 3.376" OD # GS-2250DL. These are all our branded parts, but if you wanted American made Timken ones, you will want the following parts: Inner Bearing: # TMK44FR - Race: # TMK76FR Outer Bearing: # TMK54FR - Race: # TMK96FR Seal: # TMK98ZR Any...
  view full answer...
• Looking for Replacement Seals and Races for Hub of 2025 Brinkley Z2900
  Hey Cory, the Curt 7k axle you have would use the grease seal # GS-2125DL. Did you damage your seal or are you wanting to have a spare on hand? The races you would need are part # 25520 and # 14276.
  view full answer...
• Bearings and Seal for Replacing UFP Dexter 41062 Hub with Kodiak Hub and Rotor
  I spoke with my contact at UFP Dexter and he said that your 41062 hub uses inner bearing 031-030-02, outer bearing 031-032-02, and seal 010-181-00. This is the equivalent of inner bearing # 25580, outer bearing # LM67048, and grease seal # GS-2125DL which can all be found in the bearing kit # BK3-310 along with the races for the bearings. Unfortunately the bearing kit # DBRKHW85G that you purchased isn't the same as the grease seal has a slightly larger diameter but that can easily be fixed....
  view full answer...
• Replacement Bearings & Grease Seal Kit For 7,000 lb & 8,000 lb Lippert Axle
  We have the exact kit you need to replace your bearings, races, and grease seal on your Lippert 7,000 lb axle. I verified directly with Lippert for you that the correct kit is the following: - Bearing Kit # BK3-200 This kit is for one hub, so if you need to replace the bearings and seals on multiple hubs, just be sure to order the correct quantity. And then for grease I recommend the LubriMatic Grease # L11380 with Bearing Packer # ALL647646.
  view full answer...
• What Bearings Does Kodiak Disc Brake Kit # KD94FR Use
  Hey John, since the Kodiak kit part # KD94FR is for 10k AL KO axle the following components fit it: Bearing # 25580 Race # 25520 Bearing # 28580 Race # 28521 Oil Seal # 91030
  view full answer...
• Replacement Bearings, Races, Seal for Dexter 10k Trailer Axle
  Hey John, for a Dexter 10k axle the correct bearings would be # 387A, # 25580, and for the seal part # 10-51. For races you'd want the # 382A and # 25520. Did yours fail or do you want a spare set to keep on hand?
  view full answer...
• Replacement Brake Assemblies for Dexter 10k Axles on Gatormade Trailer
  We have what you need! Thanks for the photos. Even though the serial number is torn from the axle tag, we still identified the brakes you need with the Unique ID Number 124394998016 from your 10k Dexter axle tag. I confirmed with my tech at Dexter that you need the Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4" # 23-450 (left side) and the # 23-451 (right side). These are direct replacements of brakes constructed for your 10k Dexter axles on your Gatormade trailer.
  view full answer...
  
• Replacement Grease Seal For A Dexter D1012 Trailer Axle
  Hey Ron, Dexter lists the bearings and races for the D1012 as: Inner bearing # 387A Inner race # 382A Outer bearing # 25580 Outer race # 25520 They unfortunately don't list the seal and since there's going to be differing seals that could fit that spindle so you'll really want to to use a caliper # PTW80157 to measure point B from the diagram to get the inner diameter of the seal and then measure the bore hole of the hub to get the outer diameter. If you can tell me those measurements...
  view full answer...
• Measurements of the Bearings and Races Included w/ the Bearing Kit BK3-210
  Hey Chris! The measurements for the bearings and races in the Bearing Kit item # BK3-210 are listed below: The Replacement Trailer Hub Bearing - 14125A item # 14125A has a inner diameter of 1.250". The Replacement Trailer Hub Bearing - 25580 item # 25580 has a inner diameter of 1.750". The Replacement Race for 25580 Bearing item # 25520 has a outer diameter of 3.265". The Replacement Race for 14125A Bearing item # 14276 has a 2.717" outer diameter. If you have any additional questions...
  view full answer...
• Replacement Bearing Kit for Lippert and Dexter 7,000 lb Axles
  Hey Rudi, that's a nice set up. It looks like your 2023 Keystone Raptor 424 Toy Hauler has three 7,000 lbs axles. The correct bearing kit is going to be item # BK3-210. These are sold per hub so you'll need six of them. The Bearing Kit item # BK3-210, includes the item # 14125A outer bearing, item # 25580 inner bearing, the inner race item # 25520, the outer race item # 14276, grease seal item # GS-2125DL, and a replacement cotter pin and and spindle washer. If you have any additional...
  view full answer...
• Replacement Bearings, Races & Seal For Timbren 3,500LB Axle-Less Suspension and 6,000LB Trailer Hubs
  Thank you for the pictures. Your Timbren 3500 Axle-Less system has the upgraded heavy duty spindle. This will use the Bearing Kit # BK3-100. This will include the following components if you do not want the entire kit. Inner Bearing # 25580 Inner Race # 25520 Outer Bearing # 15123 Outer Race # 15245 Grease Seal # GS-2250DL Cotter Pin # 165649
  view full answer...
  
• Recommended Timken Races And Bearings For A Dexter Axle
  We have ecerything you need! For the LM67048 Bearing, you'll need: -The Replacement Trailer Hub Bearing # LM67048, For the 25580 Bearing, you'll need: -The Replacement Trailer Hub Bearing # 25580, For the LM67010 Race, you'll need: -The Replacement Race for LM67048 # LM67010, & Finally, for the 25520 Race, you'll need: -The Replacement Race for 25580 Bearing # 25520.
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?