Replacement Brake Assemblies for Dexter 10k Axles on Gatormade Trailer

Updated 07/13/2022 | Published 06/13/2022

Products Featured in This Question

Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4" - Left Hand - 9K to 10K

(28)

$364.64

Unitized Oil Seal

(87)

$59.67

Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4" - Right Hand - 9K to 10K

(32)

$225.09

Replacement Race for 25580 Bearing

(1236)

$15.01

Replacement Trailer Hub Bearing - 25580

(2074)

$21.85

Replacement Race for 387A Bearing

(1236)

$18.87

Replacement Trailer Hub Bearing - 387A

(59)

$31.40

Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009

(33)

$780.82

Question:

Thank you, I think I want the whole assembly. Remove and replacement, I need some extra bearings and seals and the hub filler with gasket.

asked by: Stephen S

Helpful Expert Reply:

We have what you need! Thanks for the photos. Even though the serial number is torn from the axle tag, we still identified the brakes you need with the Unique ID Number 124394998016 from your 10k Dexter axle tag.

I confirmed with my tech at Dexter that you need the Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4" # 23-450 (left side) and the # 23-451 (right side). These are direct replacements of brakes constructed for your 10k Dexter axles on your Gatormade trailer.

expert reply by: Bob C

Dexter 10K Axle Tag
(click to enlarge)

Stephen

1/1/0001

Thank you, I think I want the whole assembly. Remove and replacement, I need some extra bearings and seals and the hub filler with gasket.

Bob C.

7/13/2022

If you wish to have replacement bearings and seals for the hubs on your Dexter 10k axles, those are the # 387A for the inner bearing, # 25580 for the outer bearing, and for the seal # 10-51. If you also need the races, those are the # 382A (inner) and # 25520 (outer). If you wish to have replacement drums with the bearings and seals included, that is the # 8-430-5UC3.