Determining Replacement Hub And Bearings For Dexter P-12 SLR Trailer Axle
Published 12/18/2020
Products Featured in This Question
Question:
I am sending a picture of the bearing numbers used in my last bearing change. Thanks
asked by: Marquis
Expert Reply:
I can definitely help you find the correct replacement hub and bearings for your Dexter P-12 SLR axle, but since part of the serial number was unreadable you will need to take a few simple steps to identify which bearings your axle uses.
The easiest way to accomplish this is to remove one hub and look for the numbers stamped on the inner and outer bearing like shown in the attached picture of the # L44649.
If your bearings are too worn to be able to read the numbers, you will need digital calipers like # PTW80157 to measure your spindles in area C and D as illustrated in the attached diagram.
Just let me know what bearings or measurements you have and I would be more than happy to recommend the correct hub and bearings for your axle.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brake controller
- Video: Review of Lippert Trailer Bearings Races Seals Caps - Oil Seals - LC45VP
- Search Results: trailer ramps
- Shop: Lippert Unitized Oil Seals - ID 2.875" / 3.880" OD for 10,000-lb Axles - Qty 2
- Shop: Unitized Oil Seal - I.D. 2.875" / O.D. 3.880" for Select 9K-10K Dexter Axles - Qty 1
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Video: Ultimate Overview of the Unitized Oil Seal
- Shop: Brake Controller
- Video: All About the Dexter Trailer Idler Hub Assembly for 2,200-lb E-Z Lube Axles
- Video: Review of Dexter Trailer Hubs and Drums - Idler Hub - 8-259-50
- Q&A: How To Find Replacement Hubs for Triton LT PWC Trailer
- Q&A: Bearing Kit and Hub Recommendation for a Dexter P-12 SLR Axle
- Shop: Curt Discovery NEXT Trailer Brake Controller w/ Custom Harness - Up to 4 Axles - Time Delayed
- Video: Curt Discovery NEXT Trailer Brake Controller w/ Custom Harness: The Breakdown
- Video: Review of the Unitized Oil Seal
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: trailer hubs and drums
- Search Results: brake magnet clips
- Search Results: spindle
- Search Results: bushings
- Search Results: shackle links trailer suspension parts
- Q&A: Replacement Wheel For a 2020 Jayco Redhawk 31F On a 2019 Ford E-450 Chassis
- Q&A: Is the 16" x 6" Rim Steel Dual Wheel w/ Offset AM83NR Used?
- Video: In-Depth Review of the Replacement Race for 387A Bearing
- Q&A: Replacement For 11033L Idler Hub and Spindle Ranger Boat Trailer
- Q&A: Can You Switch From Hubs/Drums to Idler Hubs On a Boat Trailer with 3,500 Lb Axle
- Q&A: Looking For Oil Bath Hub And Drum Assembly For 3,500 lb Axle 5 on 4-1/2"
- Shop: RV Antenna and Radio
Marquis
12/18/2020
I am sending a picture of the bearing numbers used in my last bearing change. Thanks