What are the Correct Bearings and Races for Dexter 8-201 Electric Drum Brakes?
Question:
I am needing the wheel bearings for Dexter 8-201, 5 on 4-1/2 electric drum brakes. Do you have the correct numbers for the bearings and races? Thank you
asked by: James S
0
Expert Reply:
The Dexter hub you referenced, 8-201, is a 5,200 lb hub, though a 5 on 4-1/2 bolt pattern does not come on 5,200 lb hubs. The correct bearings for the 5,200 lb hub are # 25580 and # LM67048, while the proper races are # 25520 and # LM67010. I have attached a link to a help article on wheel bearings that you may find useful.
If you can provide the diameter of the brake assemblies and/or the axle capacity, I would be happy to make a specific recommendation for you.
expert reply by: Kyle S
0
Products Referenced in This Question
Replacement Race for 25580 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 3.265 Inch O.D.
- Bearing 25580
- Race 25520
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- etrailer
more information >
Replacement Race for LM67048 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.328 Inch O.D.
- Bearing LM67048
- Race LM67010
- 5200 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- 10000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Replacement Boat Trailer Hubs for #82655
- Replacement Bearings for 7,000 lb Dexter EZ Lube Axle to Have On Hand for Road Trip
- Replacement Bearings and Seals for Converting 8K Oil Bath Dexter Axle to Grease
- Replacement for 826555 Idler Hub on Boat Trailer
- Bearings and Seal Needed for Lippert 8K Axle
- Hub and Drum Assembly for AL-KO T-52 Axle
- Bearings and Seals for Dexter 3,000 lb Axle with EZ Lube Spindles
- Replacement 6-on-5-1/2 Idler Hub Kit to Replace Hub 82655
- Measuring Spindle to Determine Correct Grease Seal for 1970 Airstream Safari
- How to Measure Spindle and Hub to Select Replacment Oil Seal
- Grease Seals for AL-KO T52 Axle with #42 Spindles and Bearings 25580 and 15123
- Replacement Bearings for Triton LTWCI-TX Trailer
- Replacement Bearings for an AL KO 5,200 lb Axle
- Recommended Replacement Wheel Bearings On An Airstream Trailer
- Axle Capacity with Bearings 28580 and 25580 with Seal SKF23839
- What Is the Difference Between 25580 Bearing and L68149 Bearing
- How To Find Replacement Hub Components For 2001 Trailer
- Replacement Bearing and Race For Lippert Turning Point Pin Box
- Replacement Timken Trailer Bearings, Races, and Grease Seals
- Axle Rating for Bearing 25580
- Replacement Bearings and Seal for Dexter 10k Trailer Hub
- What is My Axle Weight Capacity With Inner Bearing # 25580 and Outer Bearing # LM67048
- Correct Bearings and Seal for Al-Ko Axle 407725.9
- Bearings and Races for 7,000 Pound Trailer Axle
- How Do You Determine If An Axle Is Rated For 6,000 or 7,000 lb Capacity?
- Available Trailer Hubs That Use Inner Bearing 25580 and Outer Bearing LM67048
- Does Race Need To Be Replaced If Installing New Bearings
- Do Hub Races Have to Be Replaced Each Time Bearings Are Changed