Replacement Bearings for Dexter 5,100 Pound Axle on Grand Design Trailer
Updated 05/25/2024 | Published 12/26/2019
Products Featured in This Question
Question:
Looking to replace the wheel bearing on my Grand Design fifth wheel, it has Dexter .axles ,capacity 5100 lbs, s/n 132138240, part number 7763834. Would like the kit. Thank You
asked by: William S
Helpful Expert Reply:
I reached out to my contact at Dexter and with the serial number you provided they were able to track down the correct replacement bearings for the spindles on your axles. For the inner bearing you will use part # 25580 for the bearing itself and # 25520 for the race. For the outer bearing you will use part # LM67048 for the bearing and # LM67010 for the race.
The correct grease seal is part # RG06-070.
For a complete kit that includes these bearings, races, and seal, you can use our Bearing Kit # BK3-300. I have attached a short video review that you can check out as well.
Product Page this Question was Asked From
Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing LM67048 and 25580
- Race 25520 and LM67010
- 5200 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: wheel bearings
- Search Results: bearing packer
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Shop: Tire Chains
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Replacement Trailer Wheel Bearing - L44649
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-300
- Shop: Replacement Wedge Block for Lippert Turning Point Pin Box
- Search Results: dexter 10~36
- Shop: Grease Seals 10-36 (pair)
- Shop: Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 33" to 62" - 1,200 lbs
- Shop: Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Q&A: Can a Lippert Turning Point Pin Box be Replaced With a Reese Goose Box?
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Q&A: Replacement Components for a Dexter 5100 Pound Axle
- Q&A: Correct Bearing Kit for a Curt 5,100 lbs Axle
- Q&A: Replacement Bearing and Seal Kit for Dexter Axle Part 7763834
- Search Results: trailer bearing
- Search Results: rv bearing
- Search Results: morryde x brace
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Q&A: Will Road Armor Shock Absorbing Equalizer Kit Fit a Grand Design Imagine Travel Trailer 2500RL
- Shop: RV Mattress
- Search Results: 25981ez
- Video: Review of Stromberg Carlson RV Jack Pads - Bowtie Bases - SC23GR
- Shop: Suspension Enhancement
- Video: Installation Guide for the Dexter Bronze Bushings on a 2022 Grand Design Imagine Travel Trailer
- Shop: Trailer Hitch
- Q&A: Replacement Hubs and Brake Assemblies for a 5,100 lbs Axle
- Shop: Vehicle Lights
Customer V.
5/25/2024
BK3-300 looks good but i see there is no tang washer or castle nut cage included. You include only a cotter pin. Most if not all travel trailers / campers these days have EZ lube axles. If i buy this kit i need to either reuse tang washer which is not very safe Or i need to buy tang washers separately, which then makes the BK300 kit not complete because it would be useful to get a complete kit.