Discover Mount-n-Lock - Parts & Accessories for Your Journey

Hey Sara, the widest bumper the etrailer folding cargo carrier part #e99049 can fit is 4-1/2 inches. The only way it could attach to your bumper would be cut off the back of the bracket and then weld the front L of it directly to your bumper.

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…

Hey Bryce, thanks for reaching out, and good question. The Mount-n-Lock Heavy-Haul’r Heavy Duty 4-inch #MNT43VR is basically the same 4" x 4" bumper as the standard 4.0, but with a stronger mounting setup. You’re not getting a bigger or…

If the height of the I-beams is less than 6" as you say then you would have to have to swap out the regular safety struts for the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR, which include spacers to place the brackets…

The easiest and most cost effective way to increase ride quality on a travel trailer like the Winnebago Minnie is to upgrade to cushioned equalizers. These will provide significant increases in smoothing out the ride. I recommend the Dexter E-Z Flex…

Hey Dennis, typically we recommend the Mount N Lock Safety Struts part #MO22FR to help brace up the rear of the camper to use the 24x40 etrailer Cargo Carrier for RV Bumper #e99050 that you referenced. What are you planning on carrying with this…

Since it looks like you have C-channel on your 2021 Winnebago Micro Minnie FBS Comfort Explorer you'd have to find a welder to box the frame so that you can then install the Mount-n-Lock SafetyStruts #MO22FR that you referenced but it can fit.

Hey Danny, what you would want is the ShakeStopper Heavy Duty 2 inch hitch part #MNT72VR which has a 400 lb tongue weight capacity and was designed with heavier bike racks in mind. The hitch you mentioned only has a 100 lb capacity so it would not be…

I sure can Tim. The 24x84 etrailer Cargo Carrier for RV Bumper item #e96ZR has three mounting brackets spaced at 14-1/2", 42" center, and 69-1/2". Between the individual slats on the bottom of the carrier is 3-1/2". The carrier…

The tray dimensions of the #TLA7752 are 27-3/4" long x 24" wide and the strap adjustment range is 13-3/4" long x 6-3/4" wide x 13-1/4" tall as a minimum and 27-3/4" long x 23-1/2" wide x 23" tall as a maximum.…

Hey Alexandria! Bike racks rated for travel trailers are pretty limited. There is quite a bit of additional force back there. This also means there are no 1-1/4" bike racks that will work. I have two different options for you. The first is to…

Hi George, Most OEM bumpers are typically 4" x 4" so you could just go with the the #MNT72VR instead and add on the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR to increase the capacity of the OEM bumper to 400lbs.…